Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.9 LAccepted-AOC | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹20.5 L+₹1.3 L (7.01%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹20.9 L+₹1.7 L (8.75%)Rejected-Finance | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹23.8 L+₹4.7 L (24.3%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹24.7 L+₹5.6 L (29.0%)Rejected-Finance 365 B 10 HENRY COMPLEX MATHIYAS NAGAR KP ROAD NAGERCOIL KANNIYAKUMARI DISTRICT 629001 | KANNIYAKUMARI | TAMIL NADU | 629001 | L5 | Rejected-Finance Not being lowest |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
22 Sept 2020, 6:00 pmClosed
GE, Minniebay
GE, Minniebay, Junglighat (PO), Port Blair -744103
REPAIR / MAINT INCLUDING DAY TO DAY MAINT OF INTERNAL ELECTRICAL WIRING AT OTM ACCN AT MINNIEBAY UNDER AGE E/M NO. I IN GE MINNIEBAY, PORT BLAIR
2020_MES_370628_1
8869/E8
Open Tender
Civil Works
Item Rate
365 days
GE, Minniebay, Junglighat (PO), Port Blair
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE, Minniebay, Junglighat (PO), Port Blair -744103
₹60,000
Yes
7 Dec 2020
20 Aug 2020
24 Sept 2020
20 Aug 2020
22 Sept 2020
3 Sept 2020
Amount
Taking down carefully the existing aluminium point wiring of any size and capacity and type by disconnecting from the either terminals complete including fittings and fixtures such as switches, sockets,ceiling rose, regulators and light fittings any type etc by unscrewing and taken away from site complete. Note :cost of unserviceable materials will be charged from the contractor against schedule of credit.
M & L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated unsheathed multi-stranded copper conductor, 1100 Volts grade, with non metalic rigid PVC conduit with accessories such as junction boxes, bends, tees etc. of suitable size including sunk cast iron or pressed steel terminal box for mounting switches, sockets fan regulators etc and 3 mm thick laminated sheet top cover including continuous earth wire PVC insulated 1.5 Sq mm copper stranded conductor, 1100 Volts grade connecting to common earth and earth dolly complete all as specified for the following :-
For one light point controlled by one switch
For one buzzer point controlled by one switch
For one fan point controlled by one switch through regulator
For one light point controlled by two 2 -way switches.
For one three pin socket out let 5 amps on independent board complete.
For one three pin socket out let 5 amps on same board complete.
All as per item No 2 here in before but with cable 4.0 sqmm (nominal area) multi stranded copper wire unsheathed for one 3 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 4 sqmm copper stranded conductor, connecting to common earth and earth dolly complete.
M & L for sub main wiring with four single core PVC insulated unsheathed , 1100 Volts grade, copper cable 4x10 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit of suitable size with conduit accessories such as junction boxes, bends, tees etc. including continus earth wire PVC insulated unsheathed 1100 volts grade, 2 run of cable 10 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring Note :-One run of PVC conduit and six runs of cable shall be measured and paid as one unit.
All as per item No 4 here in before but with cable 6.0 sqmm (nominal area).
All as per item No 4 here in before but with cable 4.0 sqmm (nominal area).
M & L for sub main wiring with four single core PVC insulated unsheathed , 1100 Volts grade, copper cable 2 x 6 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit of suitable size with conduit accessories such as junction boxes, bends, tees etc. including continus earth wire PVC insulated unsheathed 1100 volts grade, cable 6 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring Note :- One run of PVC conduit two runs of cable and one run of earth wire shall be measured and paid as one unit.
All as per item No 7 here in before but with cable 4.0 sqmm.
All as per item No 7 here in before but with cable 2.5 sqmm.
All as per item No 7 here in before but with cable 1.5 sqmm.
S&F Rigid non-metallic PVC conduit enclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc, for the following size of conduit.
External dia in 20mm.
External dia in 25mm.
External dia in 32mm.
External dia in 40mm.
Supply and fixing in replacement of the following items:-
Switch piano one way 5 A, SP, 230 Volts.
Ceiling rose surface type 3 terminals 65x20mm complet all as specified
S/S combination multipurpose 2 in 1, 5 and 15 Amps flush type .
S/S combination multipurpose 5 pin and 2 pin 5 Amps flush type
S/S combination 5A, 5 pin box type
S/S combination multipurpouse 2 in 1 , 5/15 A box type
Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type
Switch piano two way 5A, SP, 230Volts.
Socket type fan regulator electronic, 5 step type, 230V.
Modular switch 6 A,230 V, make as per sample existing on site.
Modular switch 16 A,230 V.make as per sample existing on site.
Modular socket 16 A,230 V. make as per sample existing on site.
Modular fan regulator step type 100 w,230 V. make as per sample existing on site.
Modular socket 6 A,230 V. make as per sample existing on site.
Modular white cover palte with frame 1 module,
Modular white cover palte with frame 2 module
Modular white cover palte with frame 3 module
Modular white cover palte with frame 4 module
Modular white cover palte with frame 5 module
Bell push switch piano flush type 5 Amp SP one way.
Call bell, ding dong type and connection complete.
Lamp holder, PVC/Polycarbonate angular type complete all as directed
Tube light holder suitable for any tube light
Starter suitable for any tube light
Electronic ballast suitable for 36/40 W.
Electronic ballast suitable for 18/20/28W fluorescent tube light.
Electronic Ballast suitable for 9/11W CFL.
Flourescent tube 36W.
Flourescent tube 28W, T-5.
Flourescent tube 18W.
Flourescent tube 14W.
CFL lamp 2 pin 9 W PL type.
CFL lamp 2 pin 11 W PL type.
CFL lamp 18 W four pin type.
CFL lamp 18/36W four pin type.
LED 10 W Ball Lamp type.
LED 7 W Ball Lamp type.
Capacitor 2.5mfd 440/500 Volts suitable for ceiling fan
Capacitor 3.15/4.0 mfd 230 Volts, AC suitable for ceiling fan of any make/model and sweep.
Ball bearing (6201/6202/6203) suitable for ceiling fan of 1200/1400mm sweep.
Heating element for geyser 1500 watts Screw type /Clamp Type
Heating element for geyser 2000 watts Screw type /Clamp Type
Plug top 15 Amps 3 pin Make Anchor or Equvalent.
Geyser indicator neon type 230 volts
Thermostat controlled switch for controlling temperature range 30 to 70 degree celcius for 25/50 ltrs geyser
LED Ceiling Light Driver 35/36 watt, Havells leddriVer36V36Ws or eauivalent make mentioned in list of makes in PS.
LED Ceiling Light Driver 40/42 watt, Havells leddriVer36V1a42Ws or eauivalent make mentioned in list of makes in PS.
LED Ceiling Light Driver12/15 watt. Make, Havells leddriVer 12/15WenduraHoCe or eauivalent make mentioned in list of makes in PS.
MCCB 3 Pole, 415 V, fixed type, 25 to 100 Amps with breaking capacity 16 KA rupturing capacity.
MCB, TPN, 40-63A capacity, 415 V ,10KA rupturing capacity. Make- Indoasian 811220 or eauivalent make mentioned in list of makes in PS.
MCB, SPN, 40-63A capacity, 415 V ,10KA rupturing capacity. Make- Indoasian 811154 L&T/Havells/Legrand
MCB SPN 6 to 32 Amps,240V, 10KA rupturing capacity. Make- Indoasian 1151 L&T/Havells/Legrand
MCB SP 6 to 32 Amps,240V, 10KA rupturing capacity. Make- Indoasian 811122 or eauivalent make mentioned in list of makes in PS.
Sheet metal enclosure powder coated, DB, TPN ,4 way,415 V double door type.
Sheet metal enclosure powder coated, DB, SPN 4 way, 240V, double door type.
Sheet metal enclosure powder coated, DB, SPN 8 way, 240V, double door type.
Sheet metal enclosure powder coated, DB, SPN 12 way, 240V, double door type.
Single pole and neutral enclosure with a two pin and earth with single pole MCB 20 Amp
Sheet metal enclosure powder coated ,MCCB DB, 'G' frame TPN vertical D/D, 4 way confirming to IP-54 Protecton including one number MCCB, three pole, 100/125A, 25KA for incoming bus bar, neutral links, blanking plates etc, all as specified and directed by Engineer-In-Charge. Make Indoasian, 812040 or eauivalent make mentioned in list of makes in PS.
Copper cable cord flexible 3 core PVC insulated and overall PVC sheathed of size 2.5 SQ MM fixed in repair for making connection of Gyesers as directed.
450mm long PVC connection suitable for hot & cold water supply with cromium plated brass screwed nuts at both ends with washers fixed in repairs for making water connection of inlet & outlet from geyser to GI pipe 15mm dia.
Removing unserviceable geyser 25 Ltr capacity from any position after disconnecting the inlet and outlet connection, depositing to MES store and Supply and fix in replacement new 25 liters capacity electrical geyser white/half white, copper container inner tank with fiber reinforced body (FRB) puff insulation for both inner tank & for hot outlet copper connection pipe with all in built in safety accessories like thermostat/automatic thermal cut out with ON /OFF /CUT out indicators all pre-wired and additional safety accessories like pressurer release valve/presure reducing valve rate shall be including for new PVC heavy duty pipe with brass ferrule fitting for HOT and COLD water connections fixed in same or new location as ordered/required as per manufacturers instruction with suitble size nuts & bolts, making necessary connection & testing on completion complete all as directed. Make- cat no puro of Havells or Equi in Bajaj, Crompton.
All as per item No 13 here in before but with 15 liters capacity.
M& L Grouting of Bolt for Geyser
M & L Earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion Note : Earth strip/GI wire beyond 7.5 mtr will be measrued and paid separately under relevant item of this schedule.
Taking down ceiling fan/exhaust fan of any make/model and sweep for ovehauling, servicing, cleaning and lubricating movable parts with suitable lubricating oil/grease and painting one coat of synthetic enamel paint of approved quality and colour (spray painted) after preparing the surface throughly and refixing at site at same/different location and connection complete from ceiling rose with new flexible copper cable of suitable size, testing commissioning after completion of the work.Note : The accessories such as bearing and capacitor will be measured as supply only.
M&L for rewinding of ceiling fan/exhaust fan of any make/model/sweep including removal of existing burnt winding carefully from slots, cleaning the slots throughly with suitable cleaning agent, applying slot insulation and rewinding with suer enamelled copper conductor of same gauge/same number of turns as that of existing and connecting the coil suitable to operate on 230 V, single phase, AC supply, permanent capacitor type, tapping the winding and applying air drying the winding throughly and all as specified and directed.
S&F in replacement Fan clamp fabricated out of 25x5mm MS flat fixed on angle iron/truss/GI Tubing with bolts, nuts, rubber bushes and washer etc complete suitable to fix ceiling fan including painting the exposed steel surface with two coats of first quality synthetic enammeled paint all as specified and directed.
S&F in replacement Providing down rod for ceiling fan, factory made using MS tubing heavy duty grade duly painted with synthetic enamelled paint over coat of red oxide primer to any length and at height as directed, including necessary cutting/making holes etc complete all as directed.
S&F in Replacement Energy efficient (5 Star rated) ceiling fan 1200 mm sweep single phase 230 / 240 volts AC with necessary fitting and connceting with cable from ceiling rose or connector to fan including taking down carefully old ceiling fan with necessary fitting and making good to damaged surface of wall/ceiling to match existing finish all as specified and directed.Make : Cat No ES- 50 of Havells or eauivalent make mentioned in list of makes in PS. Note : Old Fan deposited to E/ M Store yard.
S&F in Replacement Heavy duty Exhaust fan continuous duty with louvers, double ball bearing. silent operation, rust proof body and blades with fixing arrangements of size 450 mm sweep, 1400 rpm, 240V, Make Havells -Turbo Jet SP or eauivalent make mentioned in list of makes in PS. Note : Old Fan deposited to E/ M Store yard.
S&F in Replacement wall mounted fan 400 mm sweep completed fixed to wall with nut bolts etc 3 core cable from connected to celing rose including taking down old unservicable air circulator fan all as specified and directed. Make Havells -Turbo Jet SP or eauivalent make mentioned in list of makes in PS. Note : Old Fan deposited to E/ M Store yard. Make Havells - Swing or equi in Bajaj/CG/Usha.
S&F Replacement Exhaust fan continuous duty with louvers, double ball bearing. silent operation, rust proof body and blades with fixing arrangements of size 300 mm sweep, 1400 rpm, 240V, Make Havells Ventil-Air DSP or eauivalent make mentioned in list of makes in PS. Note : Old Fan deposited to E/ M Store yard.
S&F in Replacement Fresh air fan continuous duty with louvers, with fixing arrangements of size 250 mm sweep, 1400 rpm, 240V, Make Havells cat part no Ventil Air - DSP or eauivalent make mentioned in list of makes in PS. Note : Old Fan deposited to E/ M Store yard.
S&F Decorative Ultra Slim linear LED lighting fixture with extruded Polycarbonate environmentel friendly energy effcient of cap 20W 6000K etc, complete with all accessories internally pre-wired and including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size. Make, Philips Astra Line in CDL or eauivalent make mentioned in list of makes in PS.
S&F in Replacement Decorative Ultra Slim linear LED lighting fixture with extruded Polycarbonate environmentel friendly energy effcient cap 9 W 6000K etc, complete with all accessories internally pre-wired and including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size. Make, Philips Astra Line CDL or eauivalent make mentioned in list of makes in PS.
S&F in Replacement energy efficient recess / Ceiling mounted LED luminari suitable for 2'x2' grid with profiled diffuser including lamp,electronic control driver 36 watts, AC 230 Volts 50 Hz supply single phase including connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting and fixing to ceiling complete all as directed. Make : C&S, CYGNUS/36W/2X2W or eauivalent make mentioned in list of makes in PS.
S&F in Replacement energy efficient recess / Ceiling mounted LED luminari Slim Panel Lights of 12 W 230 V of in round shape complete all as directed at site. Make: C&S, CARINA-RND/12W/W or eauivalent make mentioned in list of makes in PS.
S&F in Replacement LED decorative wall Lights 20 W 230 V complete all as directed at site. Make: Philips : Grace Wall light or eauivalent make mentioned in list of makes in PS.
S&F in Replacement recess / Ceiling mounted LED luminari Slim Panel Lights 12 W 230 V in Square shap. Make: C&S, CARINA-SQR/12W/W or eauivalent make mentioned in list of makes in PS.
S&F in Replacement rechargeable 6 W LED light with frosted PC cover and pull chord. Rechargeable Li-ion battery of 3.7 volts, 2000 mAh capacity invironmentel friendly energy effcient complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make :- Havells, cat part LheXteP7en1W006 or eauivalent make mentioned in list of makes in PS.
S&F in Replacement energy efficient LED security light fittings 25 Watts GreenLine Range with high power LED lamp and unique peanut lens to ensure uniform distribution, AC, 230 Volts, 50 HZ supply single phase including connection with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting all as specified and as directed. Make : C&S, Indus-E/25W or eauivalent make mentioned in list of makes in PS.
S&F in Replacement GI Bracket for security lights made out of medium grade GI Pipe 50mm dia,1.5 mtr long bend to shape as directed, fixed on walls with two Nos MS clamp/saddles as required at site including nuts, bolts and washers and all as specified and directed.
S&F in Replacement LED Bollard Light fitting 10 W 230 V . Make: Crompton grieves Model : LBLSN-10-CDL or eauivalent make mentioned in list of makes in PS.
Taking out old unserviceable Service wire and supply and fixing wire Al Conductor Weather Proof 6 Sqmm 2 core complete
Taking out old unserviceable Service wire and supply and fixing wire Al Conductor Weather Proof 10 Sqmm 2 core complete
S&F in Replacement three phase KWH meter 4 wire with LED Display, LED meter 10-60 Amp with Box complete. Make L&T WM301BC7D10 or eauivalent make mentioned in list of makes in PS.
S&F in Replacement single phase KWh meter with LED Display 1P LED Meter 10-60A of make L&T Cat part WM101BC7DL0BOX or eauivalent make mentioned in list of makes in PS.
M&L for sheet metal board complete with locking arrangement, fabricated out of 2mm thick MS sheet of size 1x0.75 Mtr flushed in wall including mounting arrangements for energy meters and one MCB DB TPN 4 way, front opening, painting with two coats of synthetic enamel paint over a coat of red oxide primer on internal and external surfaces and making good damaged surface complete including taking down old unserviceable rusted sheet metal enclosure, from the building and all as specified and directed by Engineer-in-charge. Note:- 1. Meter Box for 2 Nos Energy Meters and 4-way TPN DB. 2. Energy Meter and TPN DB will be measured and paid seperately under relavent items of this schedule.
bansal construction
ICON AGENCIES
SHUSHANT ASSOCIATES
M/s Power Engineering Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .