SPECIAL REPAIR TO CERTAIN NCs(E) MD ACCN AT DINJAN UNDER GE (AF) MOHANBARI

Amount

Taking down existing roof treatment including cement mortar bedding any thickness from roofs and cleaning the surface with wire brushes/brooms to remove dust and clean the surface with water and removing the rubbish not exc 500 mtrs complete all as specified and directed.

Demolition of existing plain cement concrete of any description and any position not otherwise specially provided for including cleaning the surfaces with wire brushes/brooms to remove dust and clean with water, and removing the rubbish not exc 500 mtrs complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone agg) as on roofs surfaces complete all as specified and directed.

M&L for 10 mm thick cement plaster in CM 1:4 with WPC @ 3% by weight of cement on concrete surfaces of roof and finished the surface even and fair complete all as specified and directed.

M & L for preparing the roof surfaces with clean, dust free on dry surfaces for water proofing treatment as follows :- (a) One coat of water based bitumen emulsion primer @ 0.30 Kg/Sqm is applied on the surface to be water proofed. (b) 3mm thick APP based polymeric membrane laid on the primered surfaces with overlaps maintained as 10 cms and are completely thermo-fused by torch flame . (c) Finished with a coat of aluminum paint @ 110 grams / Sqm complete all as specified in application manual of the company and as directed.

Taking down cement plaster on brick wall or concrete surfaces incl hacking for key racking out joints scrubbing down with water etc.

M&L rendering 15mm thick in cement mortar 1:6 on fare faces of brick or concrete surfaces finishing surfaces fair and even complete all as specified and directed .

M&L for 15mm thick cement plaster (externally) in cement mortar 1:4 on brick or concrete surfaces incl finished surfaces even and fair, using 3% WPC by wt of cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even and smooth without using extra complete all as specified and directed.

Supply only integral water proofing compound ISI marked.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with and including 3.0 Kg of cement per Sqm complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for screed bed or bedding layer 15mm thick in cement morter 1:6 for laying tiles as in floor etc complete all as specified and directed.

M&L for rendering 10 mm thick in cement morter 1:4 as in wall / vertical surface to received tiles etc complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments as in treads, and cut polished.

M&L for joint free Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed.

All as per item No 16 above but as in vertical surface etc

M&L Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed.

M&L for Non skid ceramic tiles 7to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but nexc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar complete including removing demolished material from work site complete all as specified and directed.

M&L for Granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking up or down steel water tubing for 15mm bore, complete all as specified and directed.

All as per item No 19 above but 20 mm bore, complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth

S&F 20mm dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass thereaded polypropylene random fitting fixed complete to walls, ceiling or in floors complete all as specified and directed.

S&F 25mm dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass thereaded polypropylene random fitting fixed complete to walls, ceiling or in floors complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n exc 4 sqm each etc complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) area n exc 1.5 Sqm each etc complete all as specified and directed.

M&L for 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plate, etc complete as specified and directed.

M&L for 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plate, etc complete as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fast block, filling in pressed steel chowkats including necessary form work etc complete all as specified and directed.

M&L 2nd Class Hard wood ( Sal) Plain , solid , straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed including tarring back of chowkhats with tar or coal tar black paint complete all as specified and directed.

Supply and Fix Anodised aluminum frame with powder coating of min thickness 50 micron for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Supply and Fix Anodised aluminum window and ventilators Shutters fixed without sahs bar aluminum sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading,screws etc complete all as specified and directed.

Supply and fixing Flush shutters, 25mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixing Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Glazed and skeleton shutters 35mm thick 2nd class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm etc complete all as specified and directed.

S & F in repair 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

All as per item no 39 above but frosted or figured glass complete all as specified and directed. .

S&F in repair solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening as per specification & drawing.

S/F in repair factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side as gap insert for top rails bottom rail, panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drg.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges.

S&F aluminium handle cast type anodised 150 mm size etc complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 150 mm long etc complete all as specified and directed.

S&F aluminium anodised sliding door bolt 250mm long with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

M&L for applying two coats of cement base paint on new wall surface including preparation of surface etc complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of walls by washing, rubbing down surfaces and applying one coat of cement base paint, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper complete all as specified and directed .

Material and labour for preparation of old surfaces of walls by complete removal of existing treatment and sand papering surfaces to achieve smooth surfaces and applying two coats of acrylic based distemper emulsion over a coat of primer, white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. of drops and splashes complete all as specified and directed.

M&L for preparation of untreated new wooden surface of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, with a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F bands, straps, hold fasts, etc. and similar small articles conforming to Fe-290 Gde-E-165.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and directed.

M&L for non asbestos fibre cement building board, 4mm thick, fixed to aluminium frame work with screw as in ceiling complete all as specified and as directed.

S&F aluminium anodised snap grid frame work as in false ceiling all as specified size of grid 605 X 605 mm with aluminium main T section of size 36.5 X 23.5 X 1.6 mm and cross T of size 23.5 X 23.8 X 1.6 mm with aluminium wall angle of size 36.5 X 23.5 X 1.6mm with suspender complete all as specified and directed.

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level, including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in plinth protection, cemented path, hard standing and finished surfaces even and fair complete all as specified and directed.

M&L for hard core of broken stone or boulders aggrggate of gauge not exc 63mm deposited,spread and levelled in layer not exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:2:4 type B-1, (using 20mm graded stone aggregate) 40mm thick as in sub base etc and finished the cement concrete surface rough to receive floor finishes complete all as specified and directed.

Demolition of unserviceable nahani traps / broken gully trap floor trap of any description and removing material from site.

M&L for 100 mm dia cast iron floor trap with PTMT 100 mm dia grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.

Dismantling water tanks 1000 litres capacity and removing to store complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical vertical with closed top) triple layered, hoisted and fixed in position complete all as specified and directed.

S&F in repair Ball valves 25mm high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms)

S&F in repair 10 Ltrs capacity PVC flushing cistern, valveless, syphonic action type, low level white with inlet, ball valve, float and handle complete including brackets and connection to pipe complete including dismantling of existing CI flushing cistern high level incl flush pipe complete all as specified and directed.

Supply and fixed in repairs, vitreous china, (1st quality) WHITE Squatting pan,'Orissa' pattern size 580 mm x 440mm with integral foot rests water closet) with 'P' or 'S' trap front or back inlet complete including lime concrete for bedding, connection to drain pipe and to flushing pipe , anti syphonage pipe etc complete all as specified and directed.

S&F PVC connections suitable for 15 mm dia pipe with PTMT nut of length 600 mm complete all as specified and directed.

S&Fin repaires 15mm dia fancy type chromium plated Bib tap cast copper alloy with crutch or butterfly handle complete all as specified and directed

S&F in repair of stop valve 15 mm dia CP fancy type, with long shank and cup (concealed type) cast copper alloy with crutch or butterfuly handle and screwed both ends for iron pipe or for unions complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, PVC, AC or Reinforced concrete) set in cement mortar 110 mm bore including PCC bed complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC (SWR) branch piece 110mm bore,single (single Y) equal or unequal with access door complete all as specified and directed.

S&F in repair PVC (SWR) bends 110mm bore any radius with access door complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl 110mm bore with access door complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40 mm graded broken stone aggs) as in bed to drain pipe of 110 mm bore including packing under and haunching against the sides of pipe after they are laid and tested, complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or Laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410mmx 330mm x 160mm complete all as specified and directed.

S&F in repair Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union etc complete all as specified and directed.

S&F for framed work such as grills, gratings, etc with ends of bars, shouldered and / or riveted. or forged into spikes,framed guard bars barred iron doors ladders.framed balusters walk ways railings framework of watertanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and directed.

Suppy and fixing Harrison raill/ curtain rod mild steel, anodised aluminium allloy with fixing brackets, stops, rollers etc complete all as specified and directed.

Supply and fixing in repairs aluminium anodized Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges with brackets complete all as specified and directed.

Supply and fixing in repair brass soap dish, fixed in walls with brass screw complete all as specified and directed.

Supply and fix, stainless steel plate rack 31 x 36 x 10 inch made of 1 mm thick stainless steel sheet and fixing with plug chromium plate brass screws including making good disturbed surface in CM (1:3) complete all as specified and directed. (MAKE : PRAYAG, Cat No : P-348 or equivalent model in SUYOG / BLUE STAR / ANUPAM INDUSTRIES )

Suppy and fixed 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles including removing of demolished material from work site complete all as specified.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for 10 mm dia and over mild steel TMT bars cut to length, bent to shape required including cranking and binding with MS wire (annealed) not less than 0.90 mm dia as in reinforcement complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat surface rough finished complete all as specified and directed.

Taking down carefully aluminium / copper point wiring (light, fan, socket, powerpoint) including batten, conduit and fittings such as switches, ceiling rose, sockets, brackets, light fittings, switch board etc removing, making good distrubed surfaces of wall, floor, ceiling etc complete all as directed.

M & L for point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor ( FRLS ) 1100 Volts grade cable ( red colour cable to be used for Phase connection and black colour cable to be used for neutral connection ) including PVC concealed conduit with all accessories including 1.5 sqmm copper multistrand conductor FRLS 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch , socket and fan regulator with 3 mm thick hylum laminated sheet cover incl cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and directed for following. ( Note : Cutting and chasing deemed to be included in quoted rate. )

Light/Fan/Exhaust fan/Bell point

5 amp socket on same boared

5 Amp switch socket on Independent Board.

All as per item No 93 here in before but 4.0Sqmm P.V.C insulated un sheathed cable with stranded copper conductor for 5 pin 6/16 Amp switch socket combination on independent board

S&F of socket only 3 pin, 5 Amps flush type 230/240 V complete all as specified and as directed.

S&F of switch socket combination 2 in 1, 5/6 Amps flush type230/240 V complete all as specified and as directed .( For Independent Board only)

S&F of switch socket combination 3 pin, 15/16 Amps flush type 230/240 V complete all as specified and as directed

S&F of ceiling rose 3 phase/PVC/polycarbonate,isolated body,surface type with ISI marked complete all as specified and as directed,

S&F of Step type electronic fan regulator flush type 230 volt 5 speed control and connecting up and fix position , complete all as specified and as directed

S&F of switch piano flush type 5/6 amps , 240 volt single pole one way complete all as specified and as directed

S & F Bell push flush type 5 amp,230Volt, single pole complete all as specified and as directed

S & F Buzzer/Ding Dong, A C , 230 volt complete all as specified and as directed

S&F in repair of wall decorative ultra slim LED 18/20 Watt, 230 volts, 50 Hz, 4 feet, lighting fixture with extruded polycarbonate lighting fixture, environmental friendly, energy efficient ready to use pack including lamp complete all as specified and directed.

S&F in repair of ultra slim LED batten 10 Watt, 230Volts, 50 Hz, decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly including lamp, connection wire all as specified and directed.

S&F in repair of bulk head luminaire environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs 10 Watt, 230 Volts, 50 Hz including lamp, connection wire all as specified and directed.

S&F building security light LED type of minimum 2500 Lumens (25watts) pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twisted copper conductor cable of suitable size including bracket made of 32mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and as directed.

Taking down submain wiring of any descripcion and any type including conduit and cable/wire of any size complete all as specified and directed.

M & L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through and including cocealed conduit or conduit including connected fitting and fixture complete all as specified and directed.

Supply and fixing in repair of factory made sheet metal enclosure for DBs double door, SPN, 240 volt, 8 Way, IP-42 protection with bus bar, neutral link, earth link complete all as specified and directed.

Supply and fixing in repair of 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 10 to 32 Amp current carrying capacity complete with connection testing all as specified and directed

Supply and fixing in repair of 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32-40 Amp current carrying capacity complete with connection testing all as specified and directed

Taking down ceiling fan from its position and doing complete overhauling of fan including replacement of fan clamp and split pin, rubber bush, 02 no canopy, fan capacitor of 2.5mfd painting with synthetic enamel paint over a paint of primer refixing the same after repairs complete all directed. .

M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with Galvanize earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No 5, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering , water funnel complete all as specified and testing on completion.

M/S N K SAI TRADING

M/s Sashi Enterprise

M/S RK Trading

M/s Pramillabh Construction