Providing and Fixing Aluminium windows in Type V and allied area in RCF Colony Chembur Mumbai-400074

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 and above in superstructure above plinth level upto floor five level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position plain cement concrete of specified grade with trap/granite/quartzite/gneiss metal mixing in concrete mixer including bailing out water, compacting, finishing surface, curing and including the cost of centering and shuttering at all level : Nominal Mix of 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position plain cement concrete of specified grade with trap/granite/quartzite/gneiss metal mixing in concrete mixer including bailing out water, compacting, finishing surface, curing and including the cost of centering and shuttering at all level : Nominal Mix of 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size)

Providing waterproofing treatment through specialized agencies asper their specifications to the flooring of water closets, bathrooms, kitchen, nahanies, washing places, sanitary blocks etc. by giving INJECTIONS with cement solution with water proofing compound into the floor slab so as to make it consistent, homogeneous and impervious against leakage, seepage etc. The sunk portion shall then be covered with brickbat waterproof coba in 1:5 c.s. of required thickness with necessary gradient for easy flow of water. Finally the floor shall be covered with joint less waterproof cement plaster in 1:3 c.s. 12 mm to 15 mm thick finished rough for receiving tiles. The average thickness of complete treatment shall not be less than 100 mm. The soil pan area will not be deducted. ( After completion of work leakage test shall be carried out after impounding the water for 7 days without any extra cost. The actual treated area will be measured and paid for).

Providing and applying avg 12 mm thk single coat cement sand plaster in cement mortar of mix in ratio of 1:3 (1 cement : 3 fine sand), smooth or as required to receive specified finish or to receive tiles/marble over to correct line, plumb and level to internal faces of walls/ ceilings including providing & fixing in position 150 mm wide 20 gauge GI chicken mesh at junctions of concrete and masonry work and if required apply chemical adhesive to concrete surfaces and scratch coat, necessary scaffolding with all lifts and leads, hacking, watering, curing, etc complete as directed by Engineer In Charge. NOTE: Only river sand shall be used for internal plastering work.

Removing existing door or windows with frame and shutters and making good etc. to the existing surface.

Providing and applying 20 mm thick external sand faced cement plaster upto any height and at all locations in cement mortar proportion specified below in two coats for masonry (except stone masonry) and concrete surfaces including providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding, etc complete as directed By Engineer In Charge

Providing and applying Plaster of Paris punning for avg thickness of 12mm to walls, beams, ceilings, columns in perfect line and level over the base of single coat cement plaster including roughening of existing surface making 6 mm groove at skirting and door, window jamb, sill, lintel, etc. complete or as directed Engineer In-charge/Architect. The rate is exclusive of base coat cement plaster.

Providing and applying one or more coats of approved primer and two/three coats of acrylic plastic emulsion paint of an approved make and colour as per manufacturers specifications to any surface, at all height and locations as directed including scrapping the wall, applying 2/3 coats of putti, including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge./Architect.

Providing and applying first single coat of approved primer and two coats of anti-algal, anti-fungal, exterior paint as specified below of an approved make and colour as per manufacturers specifications to any surface, upto any height from ground level and at all locations as directed including preparing surfaces for painting by any approved means, watering, scaffolding, cleaning and curing etc. complete as directed by Engineer-in-charge. By using acrylic based exterior paint.