Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹37.7 LAccepted-AOC D 35 1ST FLOOR CLOCK TOWER HARI NAGAR NEW DELHI 110064 | WEST | DELHI | 110064 | 1 | Accepted-AOC LOWEST RATE | |
| 2 | 2₹38.5 L+₹75,777.95 (2.01%)Rejected-Finance 3788 SHAH GANJ GB ROAD NEW DELHI 110006 | NEW DELHI | DELHI | DELHI | 110006 | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹40.0 L+₹2.3 L (6.06%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹41.4 L+₹3.7 L (9.68%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹42.5 L+₹4.8 L (12.6%)Rejected-Finance 45 PIR BABA TARUSHAW ROAD HALWARA AD LUDHIANA 141106 | HALWARA | LUDHIANA | PUNJAB | 141106 | 5 | Rejected-Finance NOT LOWEST |
Tender Value
₹43.6 L
EMD Value
₹87,200
Closing Date
11 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PALAM DELHI CANTT
GE (AF) PALAM DELHI CANTT-10
ADDITION/ ALTERATION TO CERTAIN OFFICES OF 1 AFDC AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT-10
2022_MES_569109_1
GENP-63/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (AF) PALAM DELHI CANTT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) PALAM
₹87,200
Yes
20 Apr 2023
14 Dec 2022
12 Jan 2023
14 Dec 2022
11 Jan 2023
29 Dec 2022
Amount
B/R WORK Dismantling of existing roof tiles/ complete roof treatment including plaster of any thickness and removing the debris from site to outside MoD land.
M&L for 15 mm thick cement plaster in cement mortar 1:4 on brick/concrete surfaces of roof and parapet mixed with water proofing compound including finishing even and smooth surface without using extra cement upto four storied bldg. Note :- Water proofing compound shall be measured & paid separately as supply only.
Supply only liquid water proofing compound.
M&L for cement concrete 1:2:4, type B-1 (using 20mm grade stone aggregate) as in coving, coping, benching, bed block for water tank, window cills etc complete.
M&L for applying 3mm thick APP membrane sheet (min weight 3.6 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method laid over a tack coat of bitumen 85/25 grade @1.20 kg/ sqm over a bituminuous primer coat conforming to IS @ 0.3 ltr /Sqm over concrete / plastered roof surface . APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc by filling with bituminous mastic complete.
M&L for factory made cement concrete tile 25 cm X25 cm X 20 mm thick, machine pressed , set and jointed in neat cement slurry and pointed with grey cement and no pigment over and including 15 mm thick screed bed in CM 1:4 on roof complete.
Excavation in post holes (or similar holes) not exc. 0.50 Cum each in soft/loose soil and getting out including returning filling in and removing surplus spoil to a distance not exc. 50.00 mtr and making good the surfaces complete.
M&L for cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, posts etc complete.
M&L for mild steel frame work as column, rafter, purlin for roof etc including necessary cutting and welding and all necessary drilling,bolting or riveting etc complete conforming to Fe 410 -W (GdeE- 250) quality A all as specified and as directed.
M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of existing sheet in any position.
M&L for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of newly steel and iron surfaces exc 10cm in width or girth all as specified.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, wooden etc.) or insulation board / slabs any thickness including cover fillets.
S&F for solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as Specified.
S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete.
Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil.
M&L for hardcore gauge n.exc 63mm of broken stone or boulders deposited, spread and levelled in layers n.exc 75mm thick, watered and well rammed to a true surface complete all as specified.
M&L 100mm thick cement concret 1:4:8 type D-2 using 40mm graded stone agreegate as in hardstanding including finishing surface even and smooth and necessary form work complete.
M&L for factory made machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and no pigment laid over 30mm thick sand layer complete.
M&L for cement concrete 1:3:6 type C-1using 20 mm graded stone agrigate as in kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed.
S&F for 18mm thick plywood (12 ply) fixed with 0.9mm thick decorated laminate both side pasted with adhesive as in cupboard, show case, partition, shutter and shelves etc. fixed with screws complete including necessary hinges, magnet catcher and handle, screw and fixing for wall/ floor and cup boards etc.
M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4.
M&L for brick work with sub class 'B' bricks straight or curved on plan in half brick wall of any radius built in cement mortar 1:4.
M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding/rounding over and including 15mm thick screed bed in cement mortar 1:4 all as specified and directed by Engr-in-charge.
Dismantling of floor, hearth, or wall tiling including cement mortar bedding ( but not backing) including removing the debris from site to outside MoD land.
M&L for anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete.
M&L for anti termite treating along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete.
M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in sub base, floor etc.
M&L for glazed ceramic coloured tiles of size 300mm X 450mm X 7mm to 8mm thick set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of the tiles as on vertical surfaces such as skirting, dado etc over and including 10mm thick rendering in cement mortar (1:3) complete.
S & F for non - skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and white cement with pigment to match the colour of tiles over 15mm thick screed bed in CM 1:4.
M&L for 75mm thick cement concrete 1:3:6, type C-2 using 40mm graded stone aggregate as in plinth protection with even and smooth finished surface without using extra cement and making 10mm wide joints at every 1.50m interval and at junction duly filled with bitumen mastic including necessary form work complete.
S&F in repair 500 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers, hoisted and fixed in position complete.
S&F in repair ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe of size 20mm dia complete.
S&F in repair 20 mm dia gun metal globe or gate valve half turn with iron lever, screwed both ends fixed complete.
M&L in repair 12 mm thick toughened ground glass door with necessary side/corner bracket hinges and floor spring including stainless steel handle 300mm long with locking arrangement, fixing frosted film etc and making jamb good as required complete all as specified and directed by Engr-in-Charge.
S&F for vitreous china wash hand basin of size 550mm x 400mm, bowl type , white,with 18mm thick granite stone ( polished) counter of suitable size duly rounded edge ,32mm dia brass chromium plated waste fitting, brass chromium plated bottle traps with inlet and outlet screwed for pipe or connections including necessary packing, union and cap including making good disturbed surfaces in cement mortar 1:3 and fixed complete. Make : Hindware, Cera,Parrywere,Jaquar.
S&F in repair 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed with swan neck and elbow operated complete all as specified and as directed.
S&F in repair 15mm dia angle valve, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.
S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete.
S&F for PVC connections 15mm size with CP check nuts of length 600mm complete.
S&F in repair for 75 mm bore cast iron floor/nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good by cement concrete B-1 (1:2:4) and testing complete.
Dismantling of 75/100mm bore cast iron soil and waste pipe of any description jointed in cement mortar from trenches/wall complete.
S&F for 75mm bore cast iron soil, waste and vent pipes (spun pipe) in any length with or without ears, with cement joints fixed to walls with suitable MS clamp complete.
S&F in repair 150mmx150mm size salt-glazed stoneware gully traps, square or round mouthed, type 'P' complete all as specified and as directed by Engr in Charge.
S&F in repairs SFRC frame & cover of size 300mm x300mm x 50mm thick suitable for square gulley trap complete all as specified and directed by Engr-in-Charge.Make M/s PS Concrete/M/s KK Manhole/Jain pipes/Delhi Spun pipe.
Taking down cement plaster of any description on brick walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc upto four storied building including necessary scaffolding.
M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surfaces including finishing even and fair surface without using extra cement.
M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces including finishing even and smooth surface without using extra cement.
M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint 100% acrylic of approved colour over a coat of primer over and including 2mm thick wall care putty complete including necessary scaffolding upto four storied building.
M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion of approved colour over a coat of primer over and including 2mm thick wall care putty complete including necessary scaffolding upto four storied building.
M&L for complete removal of existing treatment on walls and applying two coats of distemper oil emulsion of approved colour over a coat of primer over and including 2mm thick wall care putty complete including necessary scaffolding upto four storied building.
M&L for preparation of old treated surfaces of wall and applying one coat of exterior emulsion paint (weather proof and dust proof ) complete all as specified and as directed by Engr-in-Charge.
Excavation in trenches n exc 1.5m in depth and 1.5m in width and getting out in soft/loose soil complete.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soil.
Removing excavated material (soil) n .exc 50m and deposited where directed at a level n exc. 1.5m above the strating point.
M&L for cement concrete 1:4:8, type D-2 (Using 40mm graded stone aggregate) as in foundation, mass concrete and filiings complete.
Form work to side of concrete in foundations, footing base, base of columns, side and soffits of plinth beam and simillar work all as specified and directed.
M&L for reinforcement cement concrete 1:1.5:3 (nominal mix) using 20mm graded stone aggregate as in footing, foundation,beams, plinth beams, base for columns and mass concrete etc.
Form work to side of columns and simillar work all as specified.
M&L for reinforcement cement concrete 1:1.5:3 (nominal mix) using 20mm graded stone aggregate as in columns and pillars complete.
Form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and simillar work complete.
M&L for reinforcement cement concrete 1:1.5:3 (nominal mix) using 20mm graded stone aggregate as in beams, cantilevers, ressummers, lintels over 1.5m span complete.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide all as specified and directed.
M&L for reinforcement cement concrete 1:1.5:3 (nominal mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
All as per item No 66 above but but 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders.
M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified.
M&L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces including finishing even and smooth without using extra cement .
M&L for 15 mm thick cement plaster in two layers i.e 1st layer 10mm thick in CM 1:4 and second layer 5mm thick in CM 1:4 on fair faces of brick work or concrete surfaces including finishing even and smooth without using extra cement using WPC as per manufacturer's instruction all as specified and directed. (Note: WPC shall be measured & paid separately as supply only).
M&L for 5 mm thick cement plater in cement mortar 1:3 in ceiling including finishing even and smooth without using extra cement .
M&L for two coats of oil bound distemper over a coat of primer using roller including necessary scaffolding after preparation of newly plastered surfaces complete all as specified .
M&L for preparation of newly plastered surface and finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade of two coats applied @ 1.43 ltr/ 10 Sqm (Make : wall mista of berger paint or equivalent to Asian paint/ Nerolac etc having three years of performance warranty) over priming coat of exterior primer applied @ 2.20 kg/10 sqm all as specified and directed.
M&L for 75 mm thick cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base to flooring complete.
M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n.exc. 0.11sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile laid over & including 15mm thick screed bed in cement mortar 1:4.
M&L for virified ceramic tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over & including 15mm thick screed bed in cement mortar 1:4.
All as per item No 76 but on vertical surfaces such as skirting dado etc with rendering 10mm thick in CM 1:4.
S&F for factory made PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing.
S&F for factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC shets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC shet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.
S&F for butt hinges, stainless steel, ISI Marked 100mm size.
S&F for extruded aluminium alloy handles, fabricated type anodised of 125mm long.
S&F for aluminium anodised barrel tower bolts of extruded section and fixed of 100mm long.
S&F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete.
S&F for aluminium door frame and shutter powder coating of any colour (thickness of powder coating not less than 50 micron), single or double leaf (glazed and board panel) fabricated including aluminium powder coated beading rubber gasket and packing materials including drilling in existing wall and thrust bolt of suitable size comprising the followings:- (a) Door frame section 101.60mm x44.45mmx1.93 mm (b) Door shutter vertical style of Size 85mmx44.45mmx2 mm (c) Door shutter top style section 95.25mmx44.45mmx2.00 mm (d) Middle lock rail/bottom rail section 150mmx44.45mmx1.93mm. (e) Aluminium coloured powder coated tower bolt 02 Nos in each shutter 200 mm long. (f) Aluminium coloured powder coated handle 02 Nos in each shutter 150 mm long. (g) Door floor spring ISI marked. (h) Six lever mortice lock brass 100mm on in each door. (j) 12 mm thick pre-laminated partical board both face, exterior grade ISI marked. (k) Tinted glass/plain glass 5mm thick.
S&F aluminium side hung window frame and shutter powder coating of any colour (thickness of powder coating not less than 50 micron) comprising the followings (shade or tint as directed by GE):- (a) Window frame section 101.60mmx44.45mmx1.93mm. (b) Double shutter (glass and wire mesh shutter) 44mmx44mmx1.50mm style, top and bottom rail. (c) Aluminium coloured power coated butt hinges 8 Nos in each window 100 mm sizes. (d) Aluminium coloured power coated tower bolt 3 Nos in each window 150 mm long. (e) Aluminium coloured power coated handle 2 Nos in each window 100 mm long. (f) Tinted/coloured glass 5 mm thick fixed to window with rubber gasket & Al powder coated beading. (g) Aluminium coloured power coated grill make deco grill DG-104 fixed with "H" Section. (Note : If ground requirement for AC window, contractor shall provide the provision as per direction of Engineer-in-Charge without any price adjustment).
S&F in repair aluminium powder coating of any colour (thickness of powder coating not less than 50 micron) ventilator with top hung shutters with section of 16 guage including necessary jointing cleats, glazing clips, rubbers gasket, anodised aluminium snap beading, screw, powder coated aluminium anodised fittings complete.
Taking down of aluminium door/window any type and any description and re-fixing in same opening after necessary repairing such as floor spring, locks, hinges, glass, rubber beading, handles, tower bolts etc complete all as specified and as directed. (Note :- Cost of screws and misc small items shall be included in the quoted rate).
S&F for vitreous china wash down water closet (pedestal pattern), 'P' or 'S' trap including jointing and plastic water closet seat cover, closed pattern white with flat bottom with mild steel CP hinging device complete.
S&F in repair PVC valveless, syphonic action type, flushing cistern of 10 ltr capacity,low level white with inlet ball valve, float and handle including bracket and PVC flush pipe of polythene 32mm dia complete.
S&F for flushing pipe of polyethylene of low or high density of 32mm dia for low level cistern complete.
S&F for vitreous china wash basin of size 550mmx400mm including cutting for and pinning in ends of brackets or erecting stand complete all as specifed and directed.
S&F for PVC connection 15mm size and 450mm long with PTMP nuts both side complete.
S&F for waste fittings, brass chromium plated for glazed ware sink, basins etc with long screwed shanks and fly-nuts, flanged end bedded complete.
S&F in repair 15mm dia bib tap, fancy type, chromium plated with crunch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule.
S&F in repair 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed .
S&F in repair stop cock, fancy type, chromium plated, screwed down, high presure with cruntch or butterfly handle screwed both ends for iron pipe of 15mm bore.
S&F for Cast Iron `P' trap of 100mm bore.
S&F for 100mm bore cast iron soil, waste and vent (sand cast) pipes in any length with or without ears with cement joints laid in trenches or in floors complete.
S&F for 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door.
S&F for 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door.
S&F for 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door.
S&F for cast iron cowl for 100 mm bore pipe.
M&L for cement concrete bed in 1:3:6, type C-1 (Using 20mm graded stone aggregate) to 150mm drain pipe including packing under and hauching against the sides of pipe after they are laid and tested complete all as specifed.
M&L for salt-glazed stone ware drain pipes of internal dia of pipe 150mm grade 'A' laid in trenches and jointed as specified
M&L for 100mm dia salt-glazed stoneware gully traps, square mouthed floor trap, plain with grating including jointing with solvent cement complete.
S&F for collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc as specified, erected in position and securing runners with holdfasts and brackets, complete including necessary locking arrangement and fixing in position complete all as specified and as directed.
S&F for toilet paper holder of stainless steel fixed to wall with CP brass screws complete.
S&F in repair 15mm dia centre hole wash basin mixer, brass chromium plated for mixing Hot & Cold screwed down for iron pipe and fixed complete as all specified.
S&F in repair 15mm dia wall mixer, brass chromium plated without hand shower for mixing Hot & Cold water as approved complete as all specified.
S&F in repair 15mm dia bib cock two-in-one complete all as specified.
S&F in repair 15mm dia health faucet with 1 meter long chromium plated stainless steel flexible hose pipe and wall hook complete .
S&F in replacement of 15mm bore galvanised steel water tubing ‘medium grade’ with ISI marked fittings and fixed on walls, ceiling or laid in floors complete.
S&F in replacement of 20mm bore galvanised steel water tubing ‘medium grade’ with ISI marked fittings and fixed on walls, ceiling or laid in floors complete.
S&F in replacement of 25mm bore galvanised steel water tubing ‘medium grade’ with ISI marked fittings and fixed on walls, ceiling or laid in floors complete.
S&F 100mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears with cement joints and fixed to walls with suitable mild steel clamps complete.
S&F for 75mm bore cast iron (sand cast) soil waste and vent pipe in any length with or without ears fixed to walls with lead joints with suitable mild steel clamps complete.
S&F in repair oval access cap for cast iron tee, bend and branch piece for 75 mm bore.
S&F in repair oval access cap for cast iron tee, bend and branch piece for 100 mm bore.
S&F for 15mm dia stop valve , cast copper alloy, chromium plated, screwed down, high pressure with long shank or butterfly handle screwed both ends for iron pipe or union and fixed complete.
S&F in repair vitreous china wash down water closet pan (pedestal pattern), white fixing bolts, PVC flushing cistern 10ltr capacity low level and flush pipe with PVC seat cover and internal accessories (including ‘P’/'S' trap) and fixed as per manufacturers instructions.
S&F in repair vitreous china squatting pan ‘ORISSA’ pattern of size 580mmX440mm White, with ‘P’ or ‘S’ trap, integral foot rest providing joints between flush pipe and socket of WC pan (excluding flushing cistern and flush pipe) fixing with and including provision of 150mm thick lime concrete bedding complete all as specified and as directed.
Taking down and refixing old wash basin including fittings complete with making good disturbed surfaces in cement mortar 1:3 complete all as specified and as directed.
S&F in repair chromium plated shower rose fancy type fixed to 15 mm bore pipe.
S&F in repair Stainless Steel Kitchen Sink with drainage board made of 1.0mm thick sheet overall Size 915X460mm and bowl size 410X330X160mm with plugs, chromium plated waste coupling and washer including bedding in cement mortar 1:4 to dwarf wall or fixing cantilever brackets and connection to pipe complete all as specified.
M&L in repairs stainless steel plate rack of size 600mm x 900mm with 0.9mm thick sheet grade 304 SS complete.
S&F for rolled steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-290 Gde-E-165 complete.
S&F for 35 mm thick factory made flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides covered with LEAD SHEET 2 mm thick all as specified and as directed.
M&L for 8 mm thick lead glass of size 0.45 m X 0.60 m in partition wall with aluminium frame work complete.
M&L for BARC certified lead free tile 1 mm lead equivalance,set and jointed on vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of the tiles over and including 10mm thick rendering in cement mortar (1:3) all as specified.
S&F for dental metal cabinets using stainless steel 304 grade soft closed rails push to open per railer complete. (Note (i) All type of material with HDHMR board and marino laminate 1mm thick and all hardware of make Ozone or Hettich. (ii) Measurment of front face shall be measured only. Make :ABA technologies /Confident dental equipments pvt ltd or its equivalents.
S&F for 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand as in boxes,shelves,racks etc complete as directed by Engr-in-Charge.
S&F for stainless steel soft closing heavy type telescopic drawer channels of approved make 500mm long with screws etc complete. (Note :- (i) One set comprises of two telescopic channel. (ii) Runner/ channel shall be SS 304 grade and load capacity shall not be less tha 4.5 kg). Make : Ozone/ Hettich or its equivalents.
S&F for ready made 304 grade stainless steel Modular cabinet basket and acccessories such as right angle basket dental equipment basket, multipurpose basket as per site requirement including finishing (wherever required) and fittings fixed with necessary stainless steel nuts & bolts, screws & telescopic channel etc as directed by Engr-in-Charge. (Note :- For payment purpose only weight of stainless steel basket shall be considered and telescopic channel shall be measured and paid separately)
S&F for stainless steel butt hinges of size 75mmx47mmx1.80mm with stainless steel screws conforming to IS : 12817 complete
S&F for magnetic catcher double strip (horizpntal type) and approved quality in cupboard / ward robe shutters inlcuding fixing with necessary screws complete.
S&F for 100 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws complete.
Demolition of cement concrete (reinforced) in ground floors and pavings such as slab n exc 15 cm thickness (below or above ground level) including reinforcement cut as required to faciliate demolition.
Separating, scrping and cleaning of reinforcement complete.
Taking down chowkat or frames with shutters(without taking off shutters from frames) n exc 1.5 Sqm each.
Taking down chowkat or frames with shutters (without taking off shutters from frames) exc 1.5 Sqm but n exc 4 sqm each.
M&L for mirror polishing on marble /granite/kota stone where ever required to give high gloss finish complete
M&L for guniting to RCC work in column, flooring, side wall, beam, slab etc by removing loose concrete cover, cleaning of surface with wire brush and applying epoxy paint to rusted reinforcement and S&F welded wire mesh fabric or wire net less than 95mm X 95mm X 3 mm tied with existing reinforcement with nails,adhesive plaster grade for concrete and providing gunniting presure 2.00/2.5 kg/sqm with admixture 1 part of cement and 3.5 part of sand and average thickness 25 mm and making the surface even including 10mm thick plastering in cement mortar 1:4 on brick or concrete surfaces including finishing the surfaces even and smooth without using extra cement including necessary form work and all other arrangements complete all as specified and directed. (Note - Where ever reinforcement required shall be measured and paid separately).
S&F 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete.
E/M WORK Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors, etc any type all as specified and as directed.
Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed.
Taking down unservesiable DBs, sheet metal enclosure, load line etc complete all as specified and as directed.
M & L for Point wiring with single core PVC insulated but unsheathed 1.5 Sqmm FRLS multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC concealed conduit, medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories including modular metal flush box with modular plate for mounting switches, sockets, fan regulators, etc and earth wire singlle core PVC insulated but unsheathed multistrand copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLS cable as continuous earth wire connecting to common earth dolly in concealed wiring system including making good the disturbed surface of wall complete for one light point controlled by one switch one way.
All as per item No 147 above but for one ceiling fan/exhaust fan point controlled by one switch.
All as per item No 147 above one socket outlet 5 Amp controlled by one switch on independent board.
All as per item No 147 above one 3 pin 5 Amps socket out let point on the same board controlled by one switch.
All as per item No 147 above for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete.
M&L in replacement of ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete.
S&F white finished single mounting modular plates 3 modules.
S&F white finished single mounting modular plates 4 modules.
S&F white finished single mounting modular plates 8 modules.
S&F for modular switch 1 way 6 Amps one module complete.
S&F in replacement of modular socket 6 Amps 2/3 Pin combined 02 module complete.
S&F for modular switch one way 16 Amps, one module complete.
S&F for socket modular type 6 amp/16 amps, 2/3 pin combined 02 Module complete.
S&F for modular fan step regulator 120W 2 module.
Supply and fixing in repalcement of indoor decorative LED battens- integrated type 20 watt 4 feet white fixture with extruded aluminium body, suitable for LED tube 20 watt , bipin holder, connector block, LED rod 20 watt etc complete with all accessories internally are wired and including connecting up with twin core copper conductor cable complete.
Supply and fixing in repalcement of Indoor decorative LED battens- integrated type 10 watt 2 feet white fixture with extruded aluminium body, suitable for LED tube 10 watt , bipin holder, connector block, LED rod 10 watt etc complete with all accessories internally are wired and including connecting up with twin core copper conductor cable complete.
Supply and fixing in repalcement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
S&F for vertical type load line distribution board, double door ,8 way , IP 54 IK09 AC, 3 phase, 415 volts, TPN bus bar and earth bar & din rail suitable for accommodating MCCB 160 Amp, 16KA 4 Pole as incomer complete all as specified and as directed .
S&F in replacement of MCCB, 4 pole 125/160 A, 16KA, 415Volts.
S&F in replacement of MCB, SP, 6-32A ,10KA.
S&F in replacement of MCB, SPN, 40A to 63A ,10KA.
S&F for single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB single pole 20 Amps complete all as spd and directed .
Supply and fixing for sub main wiring with 2 run of 6 sq mm of single core PVC insulated but unsheathed FRLS cable multistranded copper conductor 1100 V grade IS-694 drawing into and including rigid non metallic PVC conduit, medium grade ISI marked ( not less than 20 mm) with all conduit fittings & fixing accessories for concealed in wall/ ceiling or surface including one run of 6 sq mm of single core PVC insulated but unsheathed FRLS cable earth continuity conductor cable complete. (Note- The 2 run of 6 sq mm and one run of 6 sq mm of single core cable conductor and revelent conduit with fitting acessories will be measured as one run)
All as per item No 170 above but with 2 run of 4 sqmm and one run of 4 sqmm.
All as per item No 170 above but with 2 run of 2.5 sqmm and one run of 2.5 sqmm.
S&F for exhaust fan, steel body AC single phase, 230V of size 300m sweep with blades and frame and louvers complete.
Taking down ceiling fans of any sweep and any size including cable connections and disconnecting of fan blades and removing the fan with blades.
Hanging only ceiling fans of any sweep and any size retrived from item No 174 including its fitting and fixtures after carrying out the i.e cleaning, greasing and filling, painting of fan with one coat of synthetic enamel paint by spraying after preparation of surface by cleaning all dust and filling cavity with filler, reassembling the fan etc including testing complete.
S&F for ceiling fan with blades200 mm sweep 230V, down rods, electronic regulator and accessories, min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete.
Supply and fixing for sheet metal enclosure for distribution board SPN (when MCBs to be used) 08 ways double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge.
S&F for sheet metal enclosure for distribution board SPN (when MCBs to be used ) two way, single door without bus bars complete.
S&F for rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. of dia 20 mm concealed in wall by cutting and chasing and making good the disturbed surface of wall complete.
Supply, laying and testing LT 1100 volts grade XLPE insulated screened PVC bedded electric power cable (Heavy duty) galvanised steel strip armoured with stranded aluminium conductor 6 Sqmm 2 core laid in trenches/ ducts fixed to wall/pole/inside panel drown through pipe including dismantling of existing cable complete.
S&F in repair LED bollard light fitting, mounted on 1.0 mtr height bollard, IP 65 complete with driver, internal wiring and connection with suitable size copper conductor wire complete.
Commercial Traders
Kunal Construction Co.
JAIPAL AND BROTHERS
Choudhary Enterprises
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .