Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.0 LAccepted-AOC NEAR BSNL RESIDENTIAL COMPLEX GURUDWARA LANE PORT BLAIR 744101 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744101 | ₹33.0 L | L1 | Accepted-AOC Accepted |
| 2 | L2₹33.4 LRejected-Finance BATHU BASTI OPP LAXMI MOTORS PORT BLAIR 744 103 SOUTH ANDAMAN | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | ₹33.4 L | L2 | Rejected-Finance Not Being First Lowest |
| 3 | L3₹35.1 LRejected-Finance NO 78 DOLLYGUNJ INDUSTRIAL ESTATE PORT BLAIR SOUTH ANDAMAN NICOBAR ISLAND 744 103 | PORT BLAIR | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744103 | ₹35.1 L | L3 | Rejected-Finance Not Being First Lowest |
| 4 | L4₹39.5 LRejected-Finance 124 J N ROAD HADDO P O DELANIPUR SOUTH ANDAMAN ANDAMAN NICOBAR 744102 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744102 | ₹39.5 L | L4 | Rejected-Finance Not Being First Lowest |
| 5 | Rejected-Technical | - | - | Rejected-Technical Bidder has not submitted shortfall document |
| Sl No | Description | Qty | Unit | M/S R R ENTERPRISES L1 | M/s Susanta Enterprises L2 | Mega Engineers and Builders L4 | Srinathji Industries L3 |
|---|---|---|---|---|---|---|---|
| 1.00Note:- Removal of following existing unserviceable steel/wooden components of various MES furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing,welding, glueing, providing hinges,applying putty to level the surface, placing every part in-tact and painting the disturbed portion & painting steel surface with two coats of synthetic enamel paint of existing shade with spray gun & apply red oxide primer where ever required after properly smoothening the surface with sand paper. Top shall be 18 mm thick exterior grade pre-laminated particle board one side laminated in light Wallnut shade or as approved by BSO/GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive (Fevicol SH). Make of particle board : Century/Archid /Green/Actiontesa.All kind of work will be executed where the furniture exist in different User Units of GE Haddo including BSO's Furniture Yard at Haddo, and office hours only as directed by Engineer-in-Charge. (Note applicable for item Srl No-1.01 to 25.03) | |||||||
| 1.01Almirah med steel with shelves :- FD-1032 | |||||||
| 1.02 | Three Way locking system as per drg. | 170 | Nos | 180 ₹30,600 | 155 ₹26,350 | 270 ₹45,900 | 135 ₹22,950 |
| 1.03 | Lock as per existing pattern and shape.
Make- Harrison,Godrej,Link | 158 | Nos | 250 ₹39,500 | 255 ₹40,290 | 270 ₹42,660 | 240 ₹37,920 |
| 1.04 | CP Handle as approved by BSO/GE irrespective of what is shown on drg. | 142 | Nos | 100 ₹14,200 | 95 ₹13,490 | 120 ₹17,040 | 130 ₹18,460 |
| 1.05 | Leg as per drg. | 98 | Nos | 200 ₹19,600 | 275 ₹26,950 | 330 ₹32,340 | 230 ₹22,540 |
| 1.06 | Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges complete all as specified and as directed. | 120 | Nos | 120 ₹14,400 | 135 ₹16,200 | 150 ₹18,000 | 130 ₹15,600 |
| 1.07 | Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets complete all as specified and as directed. | 115 | Nos | 50 ₹5,750 | 55 ₹6,325 | 90 ₹10,350 | 70 ₹8,050 |
| 1.08 | Supply & Fixing of new shelf by opening the clips/rivets and refixing by replacing unserviceable clips/rivets complete all as specified and as directed. | 60 | Nos | 400 ₹24,000 | 345 ₹20,700 | 510 ₹30,600 | 450 ₹27,000 |
| 1.09 | Supply & Fixing new door by removing the door from hinges, and refixing by replacing unserviceable hinges complete all as specified and as directed. | 44 | Nos | 1,000 ₹44,000 | 955 ₹42,020 | 1,120 ₹49,280 | 1,260 ₹55,440 |
Updated dates
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
6 Dec 2025, 6:00 pmClosed
GE Haddo Sri Vijaya Puram
GARRISON ENGINEER HADDO MILITARY ENGINEER SERVICES HADDO SRI VIJAYA PURAM 744102
MAINTENANCE AND REPAIR / PAINTING TO STEEL FURNITURE OF NAVY AREA AND CG AREA UNDER GE HADDO, SRI VIJAYA PURAM
2025_MES_738703_1
8206/E8
Open Tender
Civil Works
270 days
GE Haddo Sri Vijaya Puram
As per tender document
9 documents required · 9 mandatory
₹500
GE Haddo
₹87,000
Yes
30 Apr 2026
8 Nov 2025
13 Dec 2025
8 Nov 2025
6 Dec 2025
22 Nov 2025
9 Nov 2025 - 14 Nov 2025
Amount
Note:- Removal of following existing unserviceable steel/wooden components of various MES furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing,welding, glueing, providing hinges,applying putty to level the surface, placing every part in-tact and painting the disturbed portion & painting steel surface with two coats of synthetic enamel paint of existing shade with spray gun & apply red oxide primer where ever required after properly smoothening the surface with sand paper. Top shall be 18 mm thick exterior grade pre-laminated particle board one side laminated in light Wallnut shade or as approved by BSO/GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive (Fevicol SH). Make of particle board : Century/Archid /Green/Actiontesa.All kind of work will be executed where the furniture exist in different User Units of GE Haddo including BSO's Furniture Yard at Haddo, and office hours only as directed by Engineer-in-Charge. (Note applicable for item Srl No-1.01 to 25.03)
Almirah med steel with shelves :- FD-1032
Three Way locking system as per drg.
Lock as per existing pattern and shape. Make- Harrison,Godrej,Link
CP Handle as approved by BSO/GE irrespective of what is shown on drg.
Leg as per drg.
Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges complete all as specified and as directed.
Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets complete all as specified and as directed.
Supply & Fixing of new shelf by opening the clips/rivets and refixing by replacing unserviceable clips/rivets complete all as specified and as directed.
Supply & Fixing new door by removing the door from hinges, and refixing by replacing unserviceable hinges complete all as specified and as directed.
Painting of Almirah med steel with shelves as per Note.
Almirah large steel with shelves :- FD-1031
Three Way locking system for almirah large as per drg.
Lock as per existing pattern and shape. Make : Harrison,Godrej,Link
CP Handle as approved by BSO/GE irrespective of what is shown on drg.
Leg as per drg.
Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges complete all as specified and as directed.
Repairs to existing shelf by opening the clips/rivets of shelf,making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets complete all as specified and as directed.
Supply & Fixing new shelf by opening the clips/rivets and refixing by replacing unserviceable clips/rivets complete all as specified and as directed.
Supply & Fixing new door by removing the door from hinges, and refixing by replacing unserviceable hinges complete all as specified and as directed.
Painting of Almirah large steel as per Note.
Almirah large steel HH HS:- FD-1033
Three Way locking system for almirah large Steel HH HS as per drg.
Lock as per existing pattern and shape. Make-Harrison,Godrej,Link
CP Handle as approved by BSO/GE irrespective of what is shown on drg.
Leg as per drg.
Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges complete all as specified and as directed.
Repairs to existing shelf by opening the clips/rivets of shelf,making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets complete all as specified and as directed.
Supply & Fixing new shelf by opening the clips/rivets and refixing by replacing unserviceable clips/rivets complete all as specified and as directed.
Supply & Fixing new door by removing the door from hinges, and refixing by replacing unserviceable hinges complete all as specified and as directed.
Supply and fixing of 20 mm dia Chromium plated steel conduit pipe hanger rod complete all as specified and as directed.
Repairs to dented drawer by removing the drawer, Making smooth and straight by denting applying putty complete all as specified and as directed.
Painting of Almirah large steel HH HS as per Note.
Bed hard :- FD/E6/MAP/08®
Taking out existing broken plywood from the bed hard by loosening the nut bolts with washers. S&F of new 12 mm thick BWR grade plywood fixed to bed hard frame with new GI Nut, bolts. Make of plywood - Greenply/Century Ply/Archidply.
Taking out existing broken head board form bed hard and fixing new head board with 18 mm thick exterior grade pre laminated particle board both side laminated in light walnut shade or shade as approved by BSO/GE with 4mm thick teak wood beading in matching shade with new screws complete all as specified and as directed.
Taking out existing broken foot board form bed hard and fixing new foot board with 18 mm thick exterior grade pre laminated particle board both side laminated in light walnut shade or shade as approved by BSO/GE with 4mm thick teak wood beading in matching shade with new screws complete all as specified and as directed.
Hard rubber shoes as per drg.
Painting of Bed hard as per Note.
Chair writing :- FD/E6/MAP/12
S&F new seat made of 12mm thick BWR grade plywood over which 50 mm thick 32 density foam cushion shall be fixed with pvc lipping all round.The foam and plywood shall also be covered with best qualityfabric as approved by BSO/GE irrespective of what is shown on drg complete all as specified and as directed.
S&F new back made of 12mm thick BWR grade plywood over which 50 mm thick 32 density foam cushion shall be fixed with pvc lipping all round.The foam and plywood shall also be covered with best quality fabric as approved by BSO/GE irrespective of what is shown on drg complete all as specified and as directed.
Replacement of new arms with polyurethane reinforced with MS insert arms as shown on drgs /existing in chair complete all as specified and as directed.
Rubber stoper as per drawing
Painting of Chair writing as per Note.
Chair Computer : FD/E6/MAP/01
Replacement of pedestal assembly of chairs computer same as shown on drgs /existing in chair complete all as specified and as directed.
Replacement of hydraulic hieght adjustment base assembly of chairs computer same as shown on drgs /existing in chair complete all as specified and as directed.
Replacement of new arms with polyurethane reinforced with MS insert arms as shown on drgs /existing in chair complete all as specified and as directed.
Removing the old torn/damaged tapestry cloth/rexine from the seat of the chair and providing the same with tapestry/rexine over a layer of foam(75mm thick,40 density) as shown on drgs /existing in chair. Colour & shade of cloth/Rexine as approved by BSO/GE.
Removing the old torn/damaged tapestry cloth/rexine from the back of the chair and providing the same with tapestry/rexine over a layer of foam(75mm thick,40 density) as shown on drgs /existing in chair. Colour & shade of cloth/Rexine as approved by BSO/GE.
Chair verandah:- FD-259/359/FD/MAP-II/06
Arc welding to broken parts/joints of chairs.
Removing the existing unserviceable cane plastic from the chair and Recanning the chair with plastic cane 4 to 6 mm wide, white colour and Cream colour, (MAT Pattern),quality as approved by GE/Engr-in-Charge..
Removing the existing unserviceable PVC seat and back from the chair. S&F PVC seat and back 4mm thick to the chair after providing one extra support in between seat and back of chair.The support shall be of 19mm dia MS tube duly welded horizontally seat and back as directed by BSO. The PVC seat shall be got approved from BSO/GE before supply.
S&F best quality new PVC shoes to the legs of chair.
Painting of chair Verandah as per Note.
Chair CB steel with arms FD-75(M)/386
Supply & fixing of new seat and back as per drawing,Caning of seat and back shall be in godrej pattern complete all as specified and as directed.
Repair & Replacement of Arm rest shall be made of teak wood & size as per drg.
Repair to stiffner under seat and back as per drg.
Rubber stoper as per drg.
Painting of Chair CB steel with arms.
Charpoy GI Pipe:- FD-220
Taking out old broken end long rail from three way elbow by unscrewing and replacing with new long rails of GI pipe 32mm Med grade duly threaded both end to the required size fitted to the frame complete all as specified and directed by Engineer -in- charge. Make of Pipe : JINDAL/TATA/ZENITH/PRAKASH/SWASTIK
Taking out old broken end short rail from three way elbow by unscrewing and replacing with short rail of GI pipe made out of long rail retrieved wide Item serial No-9.01 here-in-before duly thread both ends to require size fitted to the frame complete all as specified and directed by Engineer -in- charge.
Taking out old broken end short rail from three way elbow by unscrewing and replacing with new short rails of GI pipe 32mm Med grade duly threaded both end to the required size fitted to the frame complete all as specified and directed by Engineer -in- charge. Make of Pipe : JINDAL/TATA/ZENITH/PRAKASH/SWASTIK
Taking out old broken end leg from three way elbow by unscrewing and replacing with legs of GI pipe made out of short rail retrieved vide Item serial No-9.02, 9.03 here-in-before; duly threaded at one end to required size fitted to the frame complete all as specified and directed by Engineer -in- charge.
Taking out old unserviceable/broken three way elbow from GI pipe by unscrewing and replacing with new three way elbow GI 32 mm dia ISI marked and complete all as specified and directed by Engineer -in- charge. Make of Elbow : Unik/NVR/MIC.
Taking out old unserviceable/broken GI check nut from the frame by unscrewing and replacing with new check nut GI 32 mm dia as per sample kept in GE office and complete all as specified and directed by Engineer -in- charge. Make of check nut :Unik/NVR/MIC.
Taking out existing broken plywood from the Charpoy GI pipe by loosening the nut bolts with washers. S&F of new 12 mm thick BWR grade plywood of size 1980x900x12mm fixed to Charpoy GI Pipe frame with new Nut, bolts and washer. Make of plywood - Greenply/Century Ply/Archidply.
Replacement of MS flat iron of size (50x5 mm) on long rail parallel to short rail.
Charpoy with hard top : FD/MAP-II/01
Taking out existing broken plywood from the charpoy by loosening the nut bolts with washers. S&F of new 12 mm thick BWR grade plywood fixed to charpoy frame with new GI Nut, bolts. Make of plywood - Greenply/Century Ply/Archidply.
Replacement of stiffners as per drg.
Hard rubber shoes as per drg.
Painting of Charpoy as per Note.
Locker bed side steel:- FD-1029
S& F new 3mm thick Stainless steel hasp & staples including removal of UNSV hasp & staples.
Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.
Replacemet of Leg as per drg.
Painting of Locker steel as per Note.
Shoe rack steel :- FD/E6/MAP/02 ( R)
Repairs to existing frame of shoe rack with welding, Grinding and smoothening of surface by applying putty complete all as specified and as directed.
Supply and fixing of mesh made with 3 mm dia MS rod at Equidistant with all around 20 mm dia MS pipe welding to legs as per drawing complete all as specified and as directed.
Hard rubber shoes as per drg.
Painting of shoe rack as per Note.
Teapoy Verandah :- FD-383/255
Top as per above Note & drg.
Short rail as per drg.
Long rail as per drg.
Leg as per drg.
Painting of Teapoy Verandah as per Note.
Chair school with hand board :- FD/E6/MAP/05
Replacement of PVC seat and back
S & F of mesh as per drg.
hand board as per drg.
PVC rubber shoe.
Painting of Chair school as per Note.
Table bed side steel :FD/E6/MAP/15( R)
Supply & fixing of new top of 18 mm thick exterior grade prelaminated particle board of existing shade/both side laminated with light Wallnut shade or as approved by BSO/GE covered with 4 mm teak wood beading in matching shade, Supply & fixing new handle for cupboard. All steel surface shall be painted with two coats of synthetic enamel paint of existing shade after preparition of surface.
Sides left/Rright as per drg
Upper Drawer as per drg
Lower drawer as per drg
Front legs as per drg
Rear Legs as per drg
Back as per drg
Replace old UNSV/rusted telescopic channel for smooth functioning.
Hard rubber shoes as per drg.
Teapoy Varandah : FD/E6/MAP/17
Top as per drg.
Rubber Shoes as per drg.
S & F of mesh as per drg.
Painting of Teapoy Verandah as per Note.
Table computer FD/E6/MAP/03
Top as per drg.
Legs board (rigt/left) as per drg.
keyboard tray with channel as per drg
Self (Top, Verticle, Bottom) as per drg
Drawer with channel as per drg.
Nylon buffers as per drg.
Painting of Table dining as per Note.
Table office clerk steel :FD-1004/1005
Top as per drg.
Legs as per drg.
Lock as per existing pattern and shape. Make-Harrison,Godrej,Link
Long Rail/Stiffner as per drg.
Short Rail/Stiffner as per drg.
Drawer as per drg.
Rubber shoes as per drg.
Painting of Table dining as per Note.
Table office officer steel :FD-1002/1003
Top as per drg.
Legs as per drg.
Lock as per existing pattern and shape. Make-Harrison,Godrej,Link
Long Rail/Stiffner as per drg.
Short Rail/Stiffner as per drg.
Drawer as per drg.
Rubber shoes as per drg.
Painting of Table dining as per Note.
Table 900 x 600 steel with drawer :FD-1008
Top as per drg.
Legs as per drg.
Lock as per existing pattern and shape. Make-Harrison,Godrej,Link
Long Rail/Stiffner as per drg.
Short Rail/Stiffner as per drg.
Drawer as per drg.
Rubber shoes as per drg.
Painting of Table dining as per Note.
Chair CB steel without arms FD-75(M)
Supply & fixing of new seat and back as per drawing,Caning of seat and back shall be in godrej pattern.
Repair to stiffner under seat and back as per drg.
Rubber stopper as per drg.
Painting of Chair CB steel with out arms.
Book Case open large : FD-1028
Handle as approved by BSO/GE irrespective of what is shown on drg.
Lock as per existing pattern and shape. Make-Harrison,Godrej,Link
Replacemet of glass as per drg.
Painting of Book case open large as per Note.
Charpoy Double bunk Cot Steel with plywood top : CWE/TD/FD/03/16
Taking out existing broken plywood from the charpoy Double bunk by loosening the nut bolts with washers. S&F of new 12 mm thick BWR grade plywood fixed to charpoy frame with new GI Nut, bolts. Make of plywood - Greenply/Century Ply/Archidply.
Replacement of stiffners as per drg.
Hard rubber shoes as per drg.
Painting of Charpoy Double bunk as per Note.
Charpoy Folding IP with haed top : FD-388
Taking out existing broken plywood from the charpoy Folding by loosening the nut bolts with washers. S&F of new 12 mm thick BWR grade plywood fixed to charpoy frame with new GI Nut, bolts. Make of plywood - Greenply/Century Ply/Archidply.
Hard rubber shoes as per drg.
Painting of Charpoy Folding as per Note.
Rack adjustable 6 tier steel : FD-106/1038
Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.
Supply & Fixing new shelf by opening the clips/rivets and refixing by replacing unserviceable clips/rivets.
Painting of Rack adjestable as per Note.
M/s Susanta Enterprises (BID ID -3485783)
Srinathji Industries (BID ID -3485847)
Mega Engineers and Builders (BID ID -3484636)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
8206Tender.pdf
Tender Documents • 0.41 MB
BOQ_827160.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid