REPAIR OF SECURITY WALL SECURITY GATE COMPOUND WALL RCC JALI PLASTERING BRICK WORK AND PERIODICAL WORK UNDER GE ARMY DHAR ROAD

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stoneswork and precast concrete articles complete all as specified and directed

M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 but (except bricks) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F Mild steel Fe-410-W(Gde-E-250)quality-B in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for Expanded metal as in ventilator grill, cut to required size, fixed with flat iron fillets of suitable size to wood or steel members, weight of expanded metal exceeding 4kg per sqm complete all as specified and directed. Note:- (steel frame and flat iron fillets shall be measured and paid separately).

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Dismantling wrought iron or mild steel work of any description not otherwise provided

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe.410-W.Gde-E-250, quality-A

S&F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified as directed.

Taking down Chowkhats or frames not exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) and removing to or from site complete all as specified.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc including making good of existing jambs complete all as specified and directed

S&F powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified.

S&F sheet glass 4.8 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F for 3mm thick ACP(Aluminium Composite pannel) sheet with aluminium base frame (size of aluminium Rectangular hollow Section-40x20mm thick) of best quality as any colour as approved by EIC /GE complete all as spd and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M & L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm agg. ) in sub base of flooring incl demolition complete all as spd and directed.

M&L for machine pressed precast concrete interlocking paver block of 60mm thickness, M-35 Grade any shape and size confirming to IS 15658 -2006, with grey cement and pigment incl dismantling of old tiles complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of 80mm thickness, M-40 Grade any shape and size confirming to IS 15658 -2006, with grey cement and pigment incl dismantling of old tiles complete all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified.

M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete all as specified and as directed.

M & L for Factory made prepolished precast concrete designer tiles, ISI marked with grey cement & pigment, 25mm thick of outdoor size 300mm x 300mm , in floors , set and jointed with grey cement slurry, over & incl 20 mm thick cement mortar (1:4) screed incl dismantling of old tiles complete, all as specified.

M&L for PCC type B-0,1:2:4 (12.5mm graded aggregate) as in kerbs or mud stops rounded or chamfered on edge, cills , copings etc complete all as specified and directed.

M& L for Glazed ceramic jointless light/dark coloured group of tile (premium quality for exterior surface) size exc 0.13sqm but n.exc 0.18 sqm area of each tiles and thicknes of wall tile not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar 1:4, incl dismantling tiles etc complete all as spd and directed.

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and incl demolition/dismantling of old tiles complete all as spd and directed.

M & L for prepolished precast designer tiles size 300x300x10mm with grey cement & pigment, outdoor /parking design in floors , set and jointed with grey cement slurry, over & incl 20 mnm thick cement mortar (1:4) screed incl demolition/dismantling of old tiles complete, all as specified. Make : Somany/Kajaria/Johnson Endura etc

S&F for silver mirror finish 1mm thick SS acrylic 3D letter of 304 grade steel and having LED light strip behind the letters. The height, width and depth of each letter shall be 300mm, 300mm and 30mm respectively. Note : (i) This item include for all the fixing materials required to fix the letters on the wall.(ii) Quoted rates include taping to the nearest light point of required length and including the wire of required core as directed by EIC. (iii) The pattern /shade and the design of LED light strip will be as decided by the Eng-in- Charge.

S&F for silver mirror finish 1mm thick SS acrylic 3D letter of 304 grade steel and having LED light strip behind the letters. The height, width and depth of each letter shall be 600mm, 450mm and 30mm respectively. Note : (i) This item include for all the fixing materials required to fix the letters on the wall.(ii) Quoted rates include taping to the nearest light point of required length and including the wire of required core as directed by EIC. (iii) The pattern /shade and the design of LED light strip will be as decided by the Eng-in- Charge.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including racking out joints , hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M & L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement incl water proofing compound complete all as specified and directed. (WPC to be measured and paid separately)

Supply only integral water proofing compound complete all as specified and directed.

M & L for preparation of new plastered surface of walls, priming plastered and other surfaces with a coat of alkali resistant priming paint and applying two coats of cement base paint white or tinted complete all as specified and directed

M&L for two coat of exterior emulsion paint over one coat of acrlic primer incl preparation of new plasterd surface by spray gun machine complete all as spd and directed. Note : Colour and make as approved by Engr-in-Charge.

M & L for preparation of old surfaces by removal of existing treatment and apply two coats of cement based paint over a coat alkali primer resistance etc complete all as specified and directed .

M&L for applying two coat of exterior emulsion paint on Old walls, pillars cornices etc surfaces by spray gun machine incl by complete removal of existing sureface & filling necessary putty where required as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

M&L for preparing old painted steel and iron surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for two coats of synthetic enamel paint on steel surfaces, over and including a coat of red oxide primer incl preparation of new steel surfaces over 10 cm in width or girth complete all as specified and directed.

Restraining resecuring including making good staples etc, of galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. all as specified and directed

Demolition of cement concrete (reinforced) (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for (below or above GL) complete all as specified and directed

Use and waste form work to sides and soffits of floor or roof beams, beams haunching, girders, bressummers, lintels, cantilevers, shelves including supports, over hangs, etc. also splays between floors and beams etc for flat rough finished surfaces of concrete complete all as specified and directed.

Use of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete walls, floor and roofs not exc 30 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide for rough finished surfaces of concrete complete all as specified and directed

M & L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L mild steel TMT bars 6 mm to 8 mm dia for stirrups and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for providing RCC 1 : 2 : 4 Type B1 (20 mm graded aggregate) for slabs supported on walls, beams and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

Taking down steel gates approximately 7.5*3.0m size (L*H) having approximate weight of 400 kg and refixing in same position after necessary repair/welding easing, greasing all as per specified and directed. Note:- Repair work shall be measured and paid seperately.

Deduct Schedule of Credit of Rs. (-) 34000.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

SHIVAE CONSTRUCTION (BID ID -3301615)

M/S SANJAY STEEL WORKS (BID ID -3301682)

RAMAN CONSTRUCTION CO (BID ID -3306951)

MAHADEV ENTERPRISES (BID ID -3300263)

NARESH KUMAR KHAJURIA (BID ID -3301296)

S K CONSTRUCTION (BID ID -3300460)

M/S SHUBAM ENGINEERS (BID ID -3302126)