6/7/NIeT/SDRF/EE/DED/GTA/26-27

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]. (ii) With 1:4 cement mortar (a) 20 mm thick plaster

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]. (ii) With 1:4 cement mortar (b) 15 mm thick plaster

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)

Applying interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive distemper/ Acrylic emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. Two coats Water based interior grade Acrylic Primer

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothening the surface. Two Coats

Applying exterior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive distemper/ Acrylic emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. (b) Two Coats

Protective and Decorative Acrlylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrlylic primer as required. The rate includes cost of material, labour, scaffolding and all incidential charges but excluding the cost of primer. (i) Two Coat ( a ) Normal Acrylic Emulsion

Supplyingand laying true to lineand level vitrified tilesof approvedbrand(sizenot less than 600mm X 600mm X 10 mm thick) in floor, skirtingetc. set in 20mm sand cement mortar(1:4) and 2mm thick cement slurry back side of tiles using cement @2.91Kg. /sq Morusing polymerised adhesive (6mmthicklayerapplieddirectlyoverfinishedartificialstone floor/Mosaic etc without any backing course) laid after application slurry using1.75Kgof cement per sqMbelow mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles usings oft and dry cloth up to mirror finish complete including the cost of materials, labourandallother incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) I (I) With application [email protected]/ Sq.m, 20mm sand cement mortar (1:4) & 2mm thick cement slurry at backside of tiles, 0.2 kg/ Sq.mwhite cement for joint filling with pigment. (A) Deep Colour & White

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative