PETTY REPAIR FOR DAY TO DAY SERVICES AT DHAR ROAD UNDER GE ARMY DHAR ROAD

Amount

Attending complaint for petty repair to leaking water in bib tap, pillar tap, stop cock, angle valve, flushing cistern, WHB, Sink, wall mixer etc. of any description any size by changing the washers(s)/ jumper(s) etc, by adjusting/replacing the washer(s) and adjustment of lever required for making the flushing cistern functional, by tighting the leaking waste pipe of WHB/Sink and providing 'M' seal to stop leakage as required. Removal of air lock/blockage of water in GI water tubing and cleaning the pipe or fittings etc. including replacement of major defective item if required, complete all as specified and directed by Engineer-in-Charge. Note :- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. 2. Contractor has to provide minimum Two plumber and including all necessary T&P on all working days from 9.00 AM to 5.00 PM. 3. A recovery of Rs. 700/- per person shall be recovered from the contractor for non-deploying of plumber or helper on any working days.

Attending complaint for petty repair to easing of Doors/ Window/ Cup Board shutters by tightening of hinges/ handles/ Al-drop bolt/ tower bolt/ knobs, hasp and stapple etc of any size/ any number of panels for easy closing/ opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, replacement of looking mirror etc complete including replacement of major defective item if required, complete all as specified and directed by Engineer-in-Charge. Note :- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. 2. Contractor has to provide minimum Two carpainter including all necessary T&P on all working days from 9.00 AM to 5.00 PM. 3. A recovery of Rs. 600/- per person shall be recovered from the contractor for non-deploying of carpainter or helper on any working days.

Attending complaint for petty repair to Masson work Plastering work brick work repair . including replacement of major defective item if required, complete all as specified and directed by Engineer-in-Charge. Note :- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. 2. Contractor has to provide minimum Two masson including all necessary T&P on all working days from 9.00 AM to 5.00 PM. 3. A recovery of Rs. 500/- per person shall be recovered from the contractor for non-deploying of plumber or helper on any working days.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premices complete all as specified and directed.

M&L for PCC 1:2:4, type B1, (20mm graded aggregate)25mm thick as in sub floor including use of necessary forw work complete all as specified and directed.

M&L for joint free anti skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile exceeding 0.11sqm but n.exc. 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

All as per item above but in skirtings laid over 15mm thick plaster in CM 1:4.

M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n.exc. 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for joint free coloured glazed ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick cement rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular ) polished, area of each tiles n.exc 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed of cement mortar (1:6) complete.

All as per item above but in skirtings laid over 15mm thick plaster in CM 1:4.

Demolition of stone slab and tiles of any description or thickness in foor, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed.

S&F for 16 to 18 mm thick granite slabs (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cill, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble laid over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Rounding to edges of kota/marble stone slabs on edge, such as in steps and other similar situations.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15cm thickness (below or above ground level) including removal of debrish out of MoD Land.

M&L for 75 mm thick cement concrete type C1, 1:3:6 (using 20 mm graded aggregate) as in plinth protections, to be finished even and smooth without using extra cement complete including use of necessary form work all as specified and directed.

Material and labour for pre-cast cement concrete type B1 1:2:4 (20mm graded aggregate) as in kerb stone (factory made) on road and path etc complete all as specified.

M&L for cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) as in copings, window cills, kerb stone for foot path and similar items with plain fair finishing including chamfers, weathering, throating etc and set in CM 1:4 complete joints to match complete all as specified and directed.

M&L for preparation of new or previously untreated plastered or concrete surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paintover a coat of primer complete all as specified.

Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.

M&L for brick work with sub class `B' bricks, straight or curved on plan to any radius in half brick thick walls built cement mortor 1:4 complete all as specified.

Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified

M&L for 10mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceilings, to be finished even and smooth without using extra cement complete all as specified

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6, to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4, to be finished even and fair with water proofing compound by weight as per manufacturer's instructions complete all as specified and as directed. (WPC will be paid separately).

M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying two coats of white wash complete all as specified and as directed.

Preparation of newly plastered surface of walls/celling and apply two coats of white wash complete all as specified and as directed.

M&L for preparing plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over one coat of alkalic resistent primer complete all as specified and as directed.

M&L for preparation of surfaces plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of cement base paint of approved colour and shade complete all as specified and as directed.

S & F in repair prelaminated particle board 18 mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in cup boards, shelves and pelmet boxes etc complete all as specified and as directed.

S&F in repairs for stainless steel wire cloth 0.36 mm nominal dia of eire and avedrage width of apertupre 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

S&F in repairs for aluminium sliding door bolt, 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.

S&F in repair MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc complete all as specified and directed

S&F in repair MS butt hinges 75mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc complete all as specified and directed

S&F in repair extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified and directed

S&F in repair extruded aluminium alloy handles, fabricated type, anodised, 100 mm size complete all as specified and directed

S&F in repair aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long complete all as specified and directed.

S&F in repair aluminium anodized barrel tower bolts of extruded section length of bolt 150mm long complete all as specified and directed.

S&F in repairs for aluminium anodised hasp & staple including bolt hinge plate and fixed with screws 100mm size complete all as specified and directed.

S&F for 4 mm thick sheet glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc incluing hacking out old broken glass complete all as specified and directed.

S&F in repairs door closer hydraulically regulated universal type,sutiable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg of extruded aluminium section designation No-3 complete all as directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty & fixed as in repair and including taking down old shutter and refixing in same opening after replacing floor spring complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 290 Gde E-165.

Framed work such as grills, gratings etc with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165.

Taking up or down 15mm steel tubing, bore of pipe in 15mm and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified

Taking up or down 20mm steel tubing and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified

M&L for GI tubing, 15mm bore `medium grade` with all fittings and fixed completeto walls and ceilings or laid in floors etc complete all as specified and directed

M&L for GI tubing, 20mm bore `medium grade` with all fittings and fixed completeto walls and ceilings or laid in floors etc complete all as specified .

Re-fixing old steel tubing, bore of pipe in 20mm and connections including connections in new or old position (walls, ceiling, floors, etc) complete all as specified

Re-fixing old steel tubing, bore of pipe in 15mm and connections including connections in new or old position (walls, ceiling, floors, etc) complete all as specified

Dismantling water tanks exc 250 & n exc 500 capacity in litres and removing to contractor's store

S&F for 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified

Dismantling water tanks exc 500 & n exc 1000 capacity in litres and removing to contractors store

S&F for 1000 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position icluding 20 mm ball brass valve complete all as specified

S&F in repairs for ball brass valves, 15 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed.

S&F in repairs for ball brass valves, 20 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed.

S&F in repairs for bib taps, 15mm bore, chromium plated, fancy type, screwed down, high pressure with cruth or butterfly handle, screwd both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs for stop valves, 15mm bore, chromium plated, fancy type, screwed down, high pressure with cruth or butterfly handle, screwd both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in reparis for pillar cock 15mm bore, foam flow chromium plated, fancy type, capstan heads, screwed down high pressure all as specified and directed.

Supply and fixing in repairs brass chromium plated shower roses 125mm with or without swivel joints, any size, including fixing to steel pipe or union all as specified.

S&F in repairs for bib taps, 15mm bore, minimum weight 90 gms, standard of PTMT any colour, high pressure screwed for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs for stop valves, 15mm bore, minimum weight 90 gms, standard of PTMT any colour, high pressure screwed for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs,sink mixer for mixing valve 15mm dia, Hot and Cold CP brass fancy including joints to steel pipe or unions , including fittings, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, wall mixer for mixing valve Hot and Cold water Screwed Down for iron pipe 15mm dia CP brass fancy including joints to steel pipe or unions , including fittings for, complete all as specified and directed by Engineer-in-Charge. (Make :Jaquar, Marc, Gem)

S&F in repairs, mixing valve 15mm dia,Hot& cold CP brass fancy including joints to steel pipe or unions for centre hole wash hand basin , including fittings complete all as specified and directed by Engineer-in-Charge. (Make :Jaquar, Marc, Gem )

Supply and fixing in repairs tubular towel rail 20mm dia, D type, 60cm long between flanges all as specified and approved.

S&F in repairs for PVC connections 15mm heavy duty hot and cold size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repairs grating doom 125mm dia of PTMT (minimum weight 40gms) with waste hole complete all as specified and directed.

S&F in repairs Waste fittings, 32/40 mm brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F in repair wast pipe 32/40 For WHB and sink mm complete all as specified and directed. .

Taking down CI, AC, PVC pipes of 100/110mm dia of any description including all fittings complete all as specified.

Supply and Fixing in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps at one meter of interval complete all as specified.

S&F in repairs for PVC (SWR) bends/tee of radius, suitable for 110mm dia PVC pipes fixed complete all as specified

M&L in repairs for cast iron Nahani trap/floor trap with CP grating including jointing with cement joint to waste pipe of 100 mm dia fixed in cement concrete type B-1(1:2:4) complete all as specified

Supply and Fixing in repairs, salt glazed stone ware gulley traps 150x150mm size square mouthed type ‘P’ including CI cover complete all as specified and directed

S&F in repairs vitreous china squatting pan white oriisa pattern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P-trap including cement concrete bedding and making good the disturbed portion to match with the existing surface of floor,complete all as specified and directed.

S&F in repairs vitreous china ware wash down Water Closet (Pedestal) white, including white PVC seat and cover, closed pattern with flat bottem and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint and to socket or stopper, complete all as specified and directed.

supply and fixing in repairs low level flushing cistern 10 ltrs capacity, and connections to pies an fixing of chain and pull, or lever, if any PVC valveless, syphonic action type, flushing cistern, low level, white,with inlet, including brackets complete all as specified and directed.

S&F in repair Vitreous china urinal flat back, size of 465x355x265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed

S & F in repair health faucet of 15 mm bore brass cromium plated including PVC pipe to connection GI tubing 15 mm bore all complete all as specified and directed.

S&F in repairs Plastic water closet seat, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs for vitreous china ware Wash Hand Basin, white, flat back of size 550 x 400 mm including brackets, cutting for and pinning in ends of brackets or erecting stand including brass CP union/waste fitting of 32mm dia and discharge pipe of 32mm dia PVC of 1.0 m length with all fittings etc complete all as specified and directed.

S&F in repair sink made of stainless steel 1mm thick kitchen or laboratroy with plugs, washers and waste, including bedding in cement mortar on to dwarf wall or including fixing cantilever barckets and connecting union to pipe, over all size 495mmx420mm, bowl size 410mm x 330mm x160mm complete all as specified and directed

Disconnectiong existing tanks of capacity exc 250 & not exc 500 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all the scale and dirt, etc from tank and from months of circulating pipes etc a complete all as specified and directed

All as per item above but capacity of tank exc 500 & not exc 1000 Ltrs

All as per item above but capacity of tank exc 1000 & not exc 2000 Ltrs

S&F in repair brass mortice lock, vertical type, size 100 mm 02 lever

S&F in repair ordinary/tint sheet glass 5 mm thick in panels of aluminium partition and doors etc fixed with aluminium glazing clips of size 1900x17.3x0.90mm and rubber bedding complete all as specified and directed

S&F in repairs, brass spindles with knobs (Any size / No) suitable for concealed stop valves/ bib tap/ pillar tap/ hot and cold mixture etc. all as per sample, complete all as specified and directed by Engineer-in-Charge.

Deduct Schedule of Credit of Rs. (-) 73057.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

ALLIED AGENCIES

NARESH KUMAR KHAJURIA

M/S SHUBAM ENGINEERS

MAHADEV ENTERPRISES

DAVINDER SINGH

SARDALIA CONST CO