Loading
Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹3.5 L
Closing Date
10 Jun 2026, 2:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ENGG
14 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility criteria: (a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Defination of Similar Work :- C-2: Any Civil Engineering Works (excluding Track works / Zonal works).
16 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender value is including escalation of (-)15% (minus fifteen percent) on CPWD DSR rates. Tenderer should note this before quoting the rates.
The original Bank Guarantee (in lieu of Bid Security) should be delivered in person to the official nominated (i.e OS/Tenders/Engg/SC Division) as indicated in the tender document before closing date for submission of bids. (i.e. excluding the last date of submission of Bids).
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General lnstructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
SW 1) Sanathnagar Freight Depot: Provision of welding facilities at SNAG yard and Service building on first floor on ATC hostel building. SW 2) Kazipet: Modification of Express bay shed at DLS/KZJ.
58_CR_SC_26_OT
58_CR_SC_26_OT
Open
Works - General
9 Months
Hyderabad, Telangana
₹0
₹3.5 L
10 Jun 2026
19 May 2026
27 May 2026
158 items across 5 schedules · ₹1,85,11,710.7 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 269 | 177.5 | 47,747.5 |
| 2 | All kinds of soil. | cum | 96 | 260.3 | 24,988.8 |
| 3 | Pipes, cables etc, not exceeding 80 mm dia. | Metre | 20 | 215.6 | 4,312 |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 195 | 196 | 38,220 |
| 5 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 24 | 700.5 | 16,812 |
| 6 | All kinds of soil | cum | 125 | 126.8 | 15,850 |
| 7 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 89 | 2,123.75 | 1,89,013.75 |
| 8 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 50 | 17.6 | 880 |
| 9 | Foundations, footings, bases for columns | Sqm | 132 | 392.15 | 51,763.8 |
| 10 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) | Sqm | 15 | 410.85 | 6,162.75 |
| 11 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | per bag of 50 kg cement used | 950 | 18.15 | 17,242.5 |
| 12 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 179 | 392.15 | 70,194.85 |
| 13 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 501 | 927.25 | 4,64,552.25 |
| 14 | Shelves (Cast in situ) | Sqm | 36 | 927.25 | 33,381 |
| 15 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 310 | 736.4 | 2,28,284 |
| 16 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 331 | 961.3 | 3,18,190.3 |
| 17 | Stairs, (excluding landings) except spiral- staircases | Sqm | 27 | 764.95 | 20,653.65 |
| 18 | Under 20 cm wide | Metre | 301 | 208.55 | 62,773.55 |
| 19 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 16 | 951.1 | 15,217.6 |
| 20 | Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) | Sqm | 532 | 384.3 | 2,04,447.6 |
| 21 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 5 | 7,132.25 | 35,661.25 |
| 22 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 10 | 9,105.95 | 91,059.5 |
| 23 | Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry 100 mm / 125 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. | cum | 33 | 10,195.45 | 3,36,449.85 |
| 24 | Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry with 150 mm to 300 mm thick with Grade -1 AAC blocks of density 551 to 650 kg/cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately). | cum | 136 | 8,333.65 | 11,33,376.4 |
| 25 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 101 | 7,311.25 | 7,38,436.25 |
| 26 | Area of slab over 0.50 sqm | Sqm | 7 | 5,136.3 | 35,954.1 |
| 27 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 104 | 1,267.95 | 1,31,866.8 |
| 28 | Second class teak wood | cum | 2 | 1,42,949.7 | 2,85,899.4 |
| 29 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 3 | 3,167.95 | 9,503.85 |
| 30 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 17 | 2,392.65 | 40,675.05 |
| 31 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). | Sqm | 3 | 462.35 | 1,387.05 |
| 32 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Each | 64 | 228.85 | 14,646.4 |
| 33 | 300x16 mm | Each | 16 | 216.55 | 3,464.8 |
| 34 | 250x16 mm | Each | 9 | 193.7 | 1,743.3 |
| 35 | 150x10 mm | Each | 15 | 59.45 | 891.75 |
| 36 | 125 mm | Each | 30 | 39.95 | 1,198.5 |
| 37 | 125x64x2.50 mm | Each | 10 | 129.85 | 1,298.5 |
| 38 | 250x16 mm | Each | 30 | 260.6 | 7,818 |
| 39 | 150x10 mm | Each | 15 | 82.55 | 1,238.25 |
| 40 | 100 mm | Each | 17 | 59.55 | 1,012.35 |
| 41 | Twin rubber stopper | Each | 8 | 72.35 | 578.8 |
| 42 | 1.0 mm thick | Sqm | 34 | 897.3 | 30,508.2 |
| 43 | Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in- Charge | Sqm | 44 | 2,307.35 | 1,01,523.4 |
| 44 | With decorative veneering on one side and commercial veneering on other side | Sqm | 44 | 1,927.5 | 84,810 |
| 45 | With 2nd class teak wood beading 62X19 mm | Sqm | 24 | 1,597.15 | 38,331.6 |
| 46 | Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre). | Sqm | 30 | 10,993.55 | 3,29,806.5 |
| 47 | Using R1 series with frame (33mm & above ) x (35mm & above) & mullion (33mm & above) x (50mm & above). (Height upto 0.90 meter) | Sqm | 3 | 9,155.2 | 27,465.6 |
| 48 | 4.0 mm thick glass panes | Sqm | 25 | 1,064.65 | 26,616.25 |
| 49 | 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. | Sqm | 120 | 978.45 | 1,17,414 |
| 50 | Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. | Sqm | 120 | 83.85 | 10,062 |
| 51 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 30 | 1,112.7 | 33,381 |
| 52 | Size of Tile 600x600 mm | Sqm | 198 | 1,553.45 | 3,07,583.1 |
| 53 | Size of Tile 600x600 mm | Sqm | 35 | 1,623.05 | 56,806.75 |
| 54 | 110 mm diameter | Metre | 40 | 377.4 | 15,096 |
| 55 | 110 mm bend | Each | 9 | 150.35 | 1,353.15 |
| 56 | 75 mm Shoe | Each | 4 | 93.1 | 372.4 |
| 57 | 110 mm | Each | 38 | 371.3 | 14,109.4 |
| 58 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. | Each | 2 | 54.7 | 109.4 |
| 59 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) | Sqm | 48 | 1,355.8 | 65,078.4 |
| 60 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 721 | 738.65 | 5,32,566.65 |
| 61 | 1:4 (1 cement: 4 fine sand) | Sqm | 580 | 347.05 | 2,01,289 |
| 62 | 1:4 (1 cement: 4 fine sand) | Sqm | 125 | 399.45 | 49,931.25 |
| 63 | 1:6 (1 cement: 6 coarse sand) | Sqm | 344 | 343.65 | 1,18,215.6 |
| 64 | 1:6 (1 cement: 6 coarse sand) | Sqm | 450 | 395.35 | 1,77,907.5 |
| 65 | Ordinary cement finish using ordinary cement | Sqm | 13 | 886.6 | 11,525.8 |
| 66 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 794 | 262.7 | 2,08,583.8 |
| 67 | Flush Band | cm per metre | 23 | 7.5 | 172.5 |
| 68 | Flush/ Ruled pointing | Sqm | 62 | 385.4 | 23,894.8 |
| 69 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm | 125 | 185.65 | 23,206.25 |
| 70 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 344 | 116.9 | 40,213.6 |
| 71 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 575 | 193.7 | 1,11,377.5 |
| 72 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 100 | 176.25 | 17,625 |
| 73 | New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. | Sqm | 917 | 181.25 | 1,66,206.25 |
| 74 | Two or more coats on new work | Sqm | 200 | 155.9 | 31,180 |
| 75 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 250 | 156.05 | 39,012.5 |
| 76 | One or more coats on old work | Sqm | 50 | 102.8 | 5,140 |
| 77 | Old work (one or more coats @ 2.20 kg/10 sqm) complete. | Sqm | 100 | 75.8 | 7,580 |
| 78 | Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface | Sqm | 300 | 131.3 | 39,390 |
| 79 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 111 | 2,434.25 | 2,70,201.75 |
| 80 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 238 | 3,551.25 | 8,45,197.5 |
| 81 | Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. | Kg | 8000 | 9.05 | 72,400 |
| 82 | In cement mortar | cum | 10 | 2,060.2 | 20,602 |
| 83 | Thickness above 40 mm up to 75 mm | Sqm | 81 | 433.55 | 35,117.55 |
| 84 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. | Sqm | 1381 | 56.35 | 77,819.35 |
| 85 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer- in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 287 | 263.95 | 75,753.65 |
| 86 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 2 | 6,767.4 | 13,534.8 |
| 87 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 4 | 6,515.55 | 26,062.2 |
| 88 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 6 | 6,258.75 | 37,552.5 |
| 89 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | Each | 4 | 2,226.35 | 8,905.4 |
| 90 | 32 mm dia | Each | 4 | 103.9 | 415.6 |
| 91 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | Each | 12 | 53.25 | 639 |
| 92 | Rectangular shape 453x357 mm | Each | 2 | 1,361.8 | 2,723.6 |
| 93 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms | Each | 4 | 673.4 | 2,693.6 |
| 94 | 15 mm nominal dia Pipes | Metre | 50 | 497.8 | 24,890 |
| 95 | 20 mm nominal dia Pipes | Metre | 100 | 537.6 | 53,760 |
| 96 | 25 mm nominal dia Pipes | Metre | 75 | 627.25 | 47,043.75 |
| 97 | 15 mm nominal dia Pipes | Metre | 100 | 244.7 | 24,470 |
| 98 | 20 mm nominal dia Pipes | Metre | 50 | 274.3 | 13,715 |
| 99 | 15 mm dia nominal bore | Metre | 40 | 366.4 | 14,656 |
| 100 | 20 mm dia nominal bore | Metre | 30 | 437.3 | 13,119 |
| 101 | 25 mm dia nominal bore | Metre | 30 | 551.7 | 16,551 |
| 102 | 50 mm dia nominal bore | Metre | 25 | 1,048.35 | 26,208.75 |
| 103 | 25 to 40 mm nominal bore | Each | 15 | 911.9 | 13,678.5 |
| 104 | 50 to 80 mm nominal bore | Each | 15 | 1,785.35 | 26,780.25 |
| 105 | 15 mm nominal bore | Each | 15 | 353.25 | 5,298.75 |
| 106 | 20 mm nominal bore | Each | 30 | 379.2 | 11,376 |
| 107 | 25 mm nominal bore | Each | 5 | 622.4 | 3,112 |
| 108 | 50 mm nominal bore | Each | 10 | 1,026.65 | 10,266.5 |
| 109 | 15 mm nominal bore | Each | 10 | 97.75 | 977.5 |
| 110 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 5000 | 11 | 55,000 |
| 111 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | Each | 40 | 111.45 | 4,458 |
| 112 | 100 mm diameter | Metre | 50 | 443.6 | 22,180 |
| 113 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | Sqm | 34 | 1,505.25 | 51,178.5 |
| 114 | Upto 5mm depth and 5 mm width | Metre | 98 | 96.75 | 9,481.5 |
| 115 | Frame size 65 x 100 mm | Metre | 40 | 1,111.3 | 44,452 |
| 116 | 35 mm thick | Sqm | 13 | 5,015.35 | 65,199.55 |
| Schedule total | ₹98,17,764.25 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
scopeofwork.pdf
ATTACHMENT
Building conditions
ATTACHMENT
STcableconditions.pdf
ATTACHMENT
bifurcationschedule_1.pdf
ATTACHMENT
Mastertenderbooklet1ason26.03.2026.pdf
ATTACHMENT
Mastertenderbooklet2ason26.03.2026.pdf
ATTACHMENT
MasterDocumentforSpecialConditionsforcontractsforCivil-Buildingworks-Correctedon10.03.2026.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .