Construction of New State of Arts Modern Mortuary Complex at Pt. B.D. Sharma, UHS, Rohtak (Pdg. EPABX and LAN System only)

Amount

HSR Items

[23.23.9]MISCELLANEOUS 9. Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required

[23.7.6.2]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia.

NS Items

Supply, Erection, Testing and Commissioning 24-Port 10/100Mbps Fast Ethernet ports Networking Switch with the minimum features of Switching capacity 4.8 Gbps, Fast Ethernet: 148,800 pps per port, 100BASE-TX, Forwarding rate 14,880 pps for 10 M complete in all respect. Make:- Cisco/D-Link/Juniper/Extreme Networks

Supply, Erection, Testing and Commissioning of 2 KVA Online UPS/ Inverter with 1 hour battery backup complete in all respet. Make:- Microtek/Luminous/Emerson

Supply, Erection, Testing and Commissioning of PVC Industrial Channel 45mm*45mm Size complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work DLINK / AMP/SGI/ Digilink make.

Supply, Erection, Testing and Commissioning of UTP Cat-6 information outlet box complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work AMP/ D-link/ Lucent make.

Supply, Erection, Testing and Commissioning of Face plate (Single / Dual) complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work. Make:AMP/ D-link/ Lucent .

Supply, Erection, Testing and Commissioning of Information Outlet connector complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work AMP/ D-link/ Lucent make.

Supply, Erection, Testing and Commissioning of UTP Cat-6 Mounting Patch Cords complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work. Make: AMP/Molex/ Dlink (i) 3 ft length

Supply, Erection, Testing and Commissioning of UTP Cat-6 Mounting Patch Cords complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work. Make: AMP/Molex/ Dlink (ii) 5 ft length

Supply, Erection, Testing and Commissioning of 6/9U rack including power distribution kit complete in all respect Make: Comrack / Valrack / HN

Supply, Erection, Testing and Commissioning of 24 port Cat-6 jack patch panel complete as per specification up to the entire satisfaction of Engineer-in-Charge of the work. Make: AMP/D-link/ Panduit/ Lucent .

Supply, Erection, Testing and Commissioning of Cable manager complete as per specification up to the entire satisfaction of Engineer-in-Charge of the work. Make: AMP/D-link/ Panduit/ Lucent

Supply, Erection, testing and commissioning of Digital Hybrid IP-PBX System configured for 04 PandT, 02 Digital Extensions, 24 Analog Extensions. It should be possible to reach the capacity of system to 48 ports and 99 IP users without any add-on CPU or chassis/hardware platform. System should have two Gigabit Ethernet ports for LAN and WAN to separate out local and VoIP traffic on external network.It should be suitable for DTMF as well as the FSK type of telephone instruments. It should have built-in multi-party conferencing without any software licensing. It should be possible to carry out 15 conferences of 3-participants at a time. The system shall have built-in web based software programming tool for system administration. The call ringing sequence would be programmable and have options such as simultaneous, hunting off, round robin and delayed simultaneous.The system shall support flexible numbering for extensions such as it may have extensions with 1 digit, 2 digits and up to 6 digits numbers as well as in combination of all.The system should have built-in outgoing Call Log buffer of 6000 calls, incoming call log buffer of 5000 and call log buffer of 1000 internal calls. Operator features shall have the assistance to extension, attended call transfer, call intercept, indication of call waiting, night service control etc. should be available by default. Make: - Avaya/ Siemens (Unify) Matrix / Alcatel

Supply, Erection, testing and commissioning of 16 Digital Key Telephone System complete in all respect. Make: - Avaya/ Siemens (Unify) Matrix / Alcatel

Supply, Erection, testing and commissioning of 16 Digit Display Caller ID Spkr Telephone Instrument with Support 30 incoming call memory, 5 outgoing, Mute button, redial and call back features. Make: - BEETEL/ PANASONIC/AVAYA

Supply, Erection, testing and commissioning of Telephone in/out connector box complte in all respect Make: Dlink/AMP/Schneider

Supply, Erection, testing and commissioning of Telephone in/out connector with face Plate complte in all respect Make: Dlink/AMP/Schneider

Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and shealed in existing pipe/Channel and making necessary connection complete in all respect upto the entire satisfaction of the Engineer- in-Charge of the work. Make Usha/Delton (i) 2 Pair Telephone Wire

Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and shealed in existing pipe/Channel and making necessary connection complete in all respect upto the entire satisfaction of the Engineer- in-Charge of the work. Make Usha/Delton (ii) 10 Pair Telephone Wire

Supply and erection of IDF/MDF with Krone Make module on Krone Make MS Box duly painted and having lock facilities. (i) 50 Pair

Supply and erection of IDF/MDF with Krone Make module on Krone Make MS Box duly painted and having lock facilities. (ii) 20 Pair

North West Telecom