Deep Drilling, Development and Stabilization of 200 mm dia mini Tube well (on EPC Mode

Amount

Deep Drilling, Development & Stabilization of 200 mm dia mini Tube well (on EPC Mode) By ODEX Method at Malpur (Gat) Village Nardani in Raipur Domana Constituency of District Jammu under UT & District Capex Budget 2023-24

Setting up of drilling site by way of shifting of requisite machinery and other allied material after making proper approaches as per the requirement at site

Boring/drilling 200 mm dia. Bore Well till sufficient aquifer Zone/discharge is encountered maximum upto 13 meter below ground level by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200 mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment / tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately)

Supplying, assembly (including welding)n, lowering and fixing in vertical position in the bore well. ERW (Electric Resistance Welded) FE 410 Mild Steel Bevelled ended 200 mm dia. Casing Pipes conforming to IS: 4270 of reputed and approved make including painted with outside surface with two coats of anti-corrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths. The cost includes transportation, loading, unloading and stacking/handling at site. Complete Job.

Development and Stabilization to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Mamta Boring co

Hyper Techno Drillers Private LTD