Providing fire hydrant system for PEB 1, 2 and 3 at IISER, Pune

Amount

Please note that Quoted rates are inclusive of all taxes, labour, transportation,royalties,lead,lift etc. Nothing extra shall be paid separately.

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling/ support block with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : Make TATA / Jindal ( Hissar )/ ZENITH

150 mm dia

100 mm dia

80 mm dia

25 mm Dia

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. Make TATA / Jindal ( Hissar )/ ZENITH

150 mm dia

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Stainless steel Make Newage/ Ceasefire/ Safex/

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : Make Zoloto/ Leader/Kirloskar

150 mm dia

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Stainless Steel (Grade 304)

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

M.S. hose cabinet stand mounted type fabricated out of M.S. sheet of 16 swg. With glass fronted (4mm thick glass with rubber beading) door and size of cabinet shall be 600mm x 750mm x 250mm quoted rate shall be includes suitable stand for mounting all fasteners etc. and cabinet shall powder coated of approved colour both inside and outside.

Supplying and fixing approved make 25mm dia automatic air release valve with unions etc. complete. Make Giacomini/ AIP valve/ Jaison

Supplying, installing, testing, and commissioning of Gun metal chrome finished Ball valves(PN 16) with fittings of screwed end type.

25mm nominal bore

15mm nominal bore

Supply and installation of glycerin filled pressure gauges 0-15 Kg/sqcm of approved brand (Wika/Micro/Hitech/Guru) etc complete as per the directions of Engineer in charge..

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Stainless Steel (Grade 304)

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

4 way - 150 mm dia M.S. Pipe

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. : All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for :

Foundations, footings, bases for columns

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Construction of valve chambers with 345m thick brick wall in CM 1:5 duly plastered from inside with cement mortar 1:3, 200mm thick PCC base of 1:4:8 and internal size of 1.2m x 1.2m x1.3m depth with heavy duty CI cover as per specification and direction of engineer in charge.