Patch Repair work of SH-MDR and ODR roads in Husenganj and Bindki Vidhansabha in Distt Fatehpur

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Providing laying spreading and compacting stone aggregates of specfic sizes to water bound macadam specification including spreading in uniform thickness hand packing rolling with three wheel 80-100 KN static roller stages to proper grade and camber, applying and brooming crushable screening to fill up the intersices of coarse aggregate watering and compaction to the required density Grading 3 as per Technical specification Clause 405

Providing and applying tack coat with bitumen VG -10 , using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (Including Cost of Bitumen)

Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing 20 mm thick pre-mix carpet with grit composed of 13.2mm to 5.6 mm @ 0.027 cum and BitumenVG-10 @ 1.46 kg per sqm finished with seal coat type C with 6.7mm Kabrai grit & Bitumen gradeVG10 as per specification Clause 1904.2

Providing and laying dense graded bituminous macadam with VG-30 Bitumen higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a Mechincal paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.DBM Gr.-1 (Including Cost of Bitumen)

Providing and laying bituminous concrete with VG-30 Bitumen higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a Mechincal paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects BC GR-2 (Including Cost of Bitumen)