SPL REPAIR TO BLDG NO T-230, T-231 AND T-185 AT GE 873 EWS, PARTAPUR AND PROVN OF ANIMAL SHED AT ZPB AND TC UNDER GE 873 EWS

Amount

Dismantling timber framed in fillets,rails, posts rafters,purlines, etc under 40 sq cm in section as spd and directed by Engineer -in -charge.

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/ blanket any thickness including cover filllets as spd and directed by Engineer -in -charge.

Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed by Engr-in-charge.

Dismantiling Wrought iron or mild steel work of any description not otherwise provided for all as specified.

S & F Roof trusses Fe 410 W (grade-E-250)quality A (framed )trussed ,purlins crane gantries rails etc(beam tee angle channel or flat sections) all as specified.

M&L preparation of new untreated surfaces eaves gutter and pipes any description n exe 60 cm girth including holdbats ,distance pieces ,etc (length measured over bends ,branches etc) one coat of syntetic enamel paint over a coat of priming with red oxied all as specified.

M&L plain fillet second class Hardwood plain filllets, rectangular in section, clean swan, secured with nails exc 13 and n.exc 25 Sqcm as spd and directed by Engineer -in -charge.

M&L 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in ceiling incl taking down & refixing all electric fittings, fixture and wiring complete all as specified.

M&L 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in wall paneling incl taking down & refixing all electric fittings, fixture and wiring complete all as specified.

M & L for 18/19mm width teak wood lipping 6 mm thick for Patical board/block board complete fix with nail all as specified..

S&F Plain galvanised mild steel sheeting of 0.63 mm thick in ridges ,hips ,valley gutter drip and straght flashing (length and girth as fixed ) with grade of zinc coating 275 all as spd and directed by Engr-in-charge.

S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with J hooks two framed work with PVC and steel washers as in roof & wall with grade of zinc coating 275 all as spd and directed by Engineer -in -charge.

M&L Preparation of new steel surface and and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces, complete all as specifeid and directed by engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing, serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as floor complete all as specifeid and directed by engr-in-charge.

M&L White non skid ceramic tile 7 to 8 mm thick (square/rectangular) are of each tile exc 0.11 Sqm but not exc 0.18Sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick CM 1:6 screed bed for laying floor all as specified and directed.

M&L glazed ceramic White tiles 450mm x 300mm x 7mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick bedding layer in cement mortar (1:3) complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or door frames including shutters exc 1.5 sqm n exc 4 sqm each complete all as specified.

Supply & fixing solid PVC frame door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube all as specified.

Supply & fixing factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification.

S&F plain, solid, straight chowkats of second class hard wood and frames, wrough, framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints all as specified.

S & F 35mm thick, 2nd class HW, plain framed, panelled shutter (double panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing from site all as specified & directed by Engineer-in- charge.

Taking shutter of any description n exe 1 Sq.m each and removing for site all as specified & directed by Engr-In- Charge.

Taking shutter of any description exe 2 Sq.m each and removing for site all as specified & directed by Engr-In- Charge.

S&F, 25 mm thick 2nd class softwood glazed and skeleton shutters, open reabeted and prepare to received glass fitted with cut and mitred beads for secuing glass for ventilators/window

M&L preparation of new wooden surfaces, two coats of synthatic enamel paints, over a coat of pink primer, surfaces of any discription, not otherwise discribed, over 10 cm width or girth for doors,ceiling, complete.

S&F mild steel, cold rolled, medium weight butt hinges 75mm, fixed with screws to wooden frames or fixed with welding to iron frames complete all as specified and directed.

S&F mild steel, cold rolled, medium weight butt hinges 100 mm, fixed with screws to wooden frames or fixed with welding to iron frames complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F aluminium handles ,cast type anodised 150mm long complete all as specified and directed.

S&F aluminium handles ,cast type anodised 75mm long complete all as specified and directed.

250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S& F 4.00 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in eachpane complete all as specified &directed by Engineer -in-Charge.

Hacking out out old broken glass (any thickness size quality or description ) from steel or wooden frames or stone concrete or brick surrounding glazing with putty or fixed with beads complete all as specified &directed by Engineer -in-Charge.

S&F for 4 mm thick sheet glass ,ordinary quality and glazing with oil puttyin square n.exe 0.5 sqm each panes complete all as specified & directed.

Taking down 15 / 16 mm water supply tubing of any description and connections including cleaning for re-fixing or removal to store etc complete all as specified.

Taking down 20 mm water supply tubing of any description and connections including cleaning for re fixing or removal to store etc complete all as specified.

S&F 16mm outer dia 3-layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stavlized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or floors etc. complete all as specified and directed.

S&F 20mm outer dia 3-layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stavlized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or floors etc. complete all as specified and directed.

S & F in repairs vitreous china wash down water closet (Padestal Pattern) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with flat bottom and connection to drain or out going pipe and flushing pipe etc complete all as specified and directed.

S & F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 450mm long etc complete all as specified and directed.

S&F in repairs vitreous china wash hand basin of 550mmx400mm white flat back including chromium plated fancy type pillar tap capstain head suitable for 15mm bore of pipe, & 45cm long with chromium plated nuts and bolts and suitable washers, PVC waste pipe 32mm bore CP waste coupling including angle iron brackets of 35x35x6mm etc complete all as specified and directed.

S & F in repairs 15mm bore bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.

S & F in repairs 15mm Stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for uniuns and fixed complete all as specified and directed.

S&F in repair Health faucet (ABS BODY) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m ong flexible tube & ABS wall hook including making connection & fixed In position complete in all respect as specified.

S&F, PVC connection of 15 mm size with PTMT nuts of length 450 mm , complete all as specified and directed by Engr-in-charge.

S & F in repairs Brass CP tubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges complete all as specified and directed.

Dismantling of water tanks500 litres capacity of any description and removing to store complete all as specified and directed.

S & F puff water tank 500 litres capacity, insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform complete all as specified and directed.

S&F Iin repair 20 mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed all as specified.

S&F in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

Demolition and breaking up drain pipes salt glazed stone ware ( SGSW)/CI/PVC set in cement mortor as in sewage line ( intenal dia of pipe 100/150 mm ), complete all as specifeid and directed by engr-in-charge.

M&L, plain cement concrete 1:3:6 type C-2 ( using 40mm graded stone aggregate) for bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 100/150 mm bore pipe, complete all as specifeid and directed by engr-in-charge.

M&L, PVC ( SWR) drain pipe 110 mm bore, single socketed, in any length with rubber ring joint, laid and jointed on concrete bed complete including testing al as specified ( concrete to be measured and paid separately) , complete all as specifeid and directed by engr-in-charge.

Excavation in trenches, n. Exc 1.50 m wide and n. Exc 1.5 m in deep for foundation, etc or for shafts, Wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n exc 1.50 in depth and getting out in hard/dense soil, complete all as specifeid and directed by engr-in-charge.

Returning, filling including spreading, levelling, watering and well ramming in layers n exc 25 cm thick, complete all as specifeid and directed by engr-in-charge.

Removing excavated material n exc 50m and deposinting where directed at a level n exc 1.5m above the starting point, complete all as specifeid and directed by engr-in-charge.

PVC bend any radius size 110mm bore with access doors complete all as specified and directed.

M&L fixed in repair 75 mm PVC floor trap ,with grating including jointed to waste pipe including jointing to waste pipe fixed in cement concrete type B-1(1:2:4)

S & F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plug washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed.

S&F in repair vitreous china white , approximate size 160x160 x90mm Soap dish fixed to wall complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry/ PCC block masonary , built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L Precast cement concrete block masonry with solid blocks exc 10 cm in width and set in cm 1:6, type C1 1:3:6 (20 mm graded aggregate).

Taking down cement plaster of any description on brick or stone walls, etc, incl racking out joints, hacking for key, scrubbing down with water etc, complete all as specifeid and directed by engr-in-charge.

M&L, Rendering 15mm thick on fair faces of brick work finished even and fair in CM 1:4, complete all as specifeid.

M&L, Rendering 10mm thick on fair faces of brick work finished even and smooth without using extra cement in CM 1:6, complete all as specifeid and directed by engr-in-charge.

M&L, for prepartion of newly plastered wall surfaces of any description applying Two coat of cement base paint /over a wall of primer complete all as specifeid and directed.

M&L for preparing newly plastered or pointed surface of wall and applying two coats of distemper over a coat of primer complete all as specified.

M&L, for two coat of white washing and prepartion of old treated wall surfaces , complete all as specified.

M&L complete removal of existing treatment of old treated wall surfaces with washing rubbing down and apply two coat of oil bound distempering over a coat of chalk whiting, complete all as specifeid.

M&L Machine cut kota stone slab flooring 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with 20 mm thick screed bed in cement and sand mortar 1:4.complete

M&L for PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

M&L for PCC ( 1:2:4) type B-2 using 40mm graded stone aggreage in fdn filling and mass concrete all as per specifed.

S&F Mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle channel or flat sections) including distance pieces, cleats etc.(Fe-410-W(Gde E-250) Quality-A) all as per specifed.

S&F plate girder or single stanchions, built up of one beam or channel secton with flange plates, caps, bases, splices, angle brackets, cleats and other connections (Fe-410-W (Gde E-250) Quality-A) all as per specifed.

S&F rolled Mild steel plates plain square cot or notched (ordinary and counter sunk) forming holes, without any attachement (Fe-410-W (Gde E-250) Quality-A) all as per specifed.

Excavation in post holes (or similar holes) in Hard/dense soil, each not exceeding 0.50 cubic meter in any type of soil, getting out retruning filling in watering and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm and removing surplus soil to a distance n exc 50 mtr and making good surface.

Taking down carefully damaged copper/aluminum point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, cassing & capping, pendants, sockets, light fitting etc and making good disturbed surfaces of wall/roof complete all as specified and directed.

Taking down of MCB DB/TPN 8/16 way including mcb sp and spn and making good of wall complete all as specified and directed.

M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board with 3mm thick plastic laminated Hylum Sheet /gang box of suitable size and shape and Modular sunken boxes for mounting light points etc covered ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.cost of gang box /hard wood sunken box shall be deemed to be included in the rate.

(a) One light/fan/Bell point controlled by one 5 Amps one way switch

(b) One 3 pin socket outlet 5 Amps on independent board

(c) One 3 pin socket outlet 5 Amps on same board

M&L point wiring for power point with 2.5 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed electric cable 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board with 3mm thick plastic laminated Hylum Sheet /gang box of suitable size and shape and Modular sunken boxes for mounting light points etc covered ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.Make: Havells/Polycab/Grandlay.

S & F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed by Engr-in-Charge. Make: Havells/Anchor/Legrand

S&F Socket outlet 2 in 1, 3 pin, 6A (multipurpose) suitable for 3 pin / 5 pin plug complete all as specified and directed by Engir-in-Chage. Make: Havells/Anchor/Legrand

S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage. Make: Havells/Anchor/Legrand

S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose). Complete all as specified and directed by Engr-in-Charge.Make: Havells/Anchor/Legrand

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.Make: Havells/Anchor/Legrand

Supply and fixing Rechargeable LED Bulb 9 W ,220 V, white color all as specified and as directed.Make: Bajaj/Havells/Philips

S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 22 W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed. Make: Bajaj/Havells/Philips

S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.Make: HAVELLS /wipro/CG/Phillips or equivalent .

S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed. Make :Legrand/Schneider/ABB.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. Make :Legrand/Schneider/ABB.

Supply & Fixing LED light fitting 1X10W bulkhead luminaires including LED light and driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. Make: Bajaj/Havells/Philips

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.

M & L for GI Pipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer and taking out old one including connection with street light complete all as directed.Make: TATA/Jindal/Prakash Surya

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed. Make :Havells/Bajaj/Crompton

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm Make : Bajaj/Havells/Anchor all as specified and directed.

S&F Star rated Energy Efficient Electric Geyser Vertical Type Copper 25 Litres Storage capacity with Thermostat, Pressure release and all other safety features as per BIS and duly provided with Inlet Outlet crome plated steel connections, brass stop cocks, grouting with cement on the wall and provided with 2.5 sqmm copper wiring and 15 Amp Switch Socket incl connection to earth for complete all as specified and directed.

S&F wiring for PVC cassing caping submain wiring alongwith earth with the following sizes of FRLS is PVC insulated copper conductor, single core cable in surface/recessed as required 2x4.0 sqmm + 1x4 Sqmm wire for complete all as specified and directed.

S&F wiring for PVC cassing caping submain wiring alongwith earth with the following sizes of FRLS is PVC insulated copper conductor, single core cable in surface/recessed as required 2x6.0 sqmm + 1x4 Sqmm wire for complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross- sectional area 10 Sqmm 2 core complete all as specified and directed by Engr-in-charge.

Supply and fix exhaust fan, steel body AC Phase 230V, 50 Hz, RPM 1200 of size 300m sweep with, blades and frame and louvers complete all as specified and directed. Make Bajaj/Havells/Anchor

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete Make: Bajaj/Havells/Crompton

Supply and fixing MCB SPN 240V, 10KA 'C' curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed. Make :Legrand/L&T/Havells

Supply and fix and replacement after taking down the old unserviceable LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make :Bajaj/Havells/Crompton

Supply and fixing 36 watt LED type warm white non-integral vertical HB/MB light with full aluminium reflector suitabel for hanging on celling with all fitting arrangement complete all as specified and directed. Make :HAVELLS /Grandlay/Phillips.

M & L for point wiring multi stranded copper conductor of size 4.00 Sqmm PVC insulated unsheathed FRLS cable in existing PVC casing and capping and all accessories of suitable size for concealed wiring including 4.0 Sqmm copper earth wire (Green colour) FRLS cable for one light point or exhaust and fan point or bell point controlled by one 5/15 Amp switch one way using cable of different insulation colour for colour coding including 3 mm thick laminated sheet cover mild steel sheet our cast iron sunken box with red oxide coat including making good to disturbed surface of wall/floor complete all as specified and directed. .

Deduct Schedule of Credit of Rs (-) 1,28,589.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

M/S ASGAR ALI TIMBER SHOP (BID ID -3411791)

osho traders (BID ID -3412525)