GE ELECT/D-62/2025-26

Amount

Excavation in trenches not exc. 1.5 m wide and not exc 1.5 mtr deep in soft/loose soil for laying / taking up/ taking down of cables and getting out and leveling of bottom surface to required level completed all as specified and directed by Engr-in-charge.

Returning filling in,. Including spreading, leveling,. Watering and well ramming soil in layers not exceeding 25 cm thick completed all as specified and directed by Engr-in-charge.

Removing excavated material (ie soil) from site to a distance n. exc 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr above the starting point completed all as specified and directed by Engr-in-charge.

Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables etc,completed all as specified and directed by Engr-in-charge. Note : Measurement shall be taken after punning down.

S&F sub class B bricks having minimum compressive strength 75 Kg/ Sqcm laid in trenches for cable protection etc completed all as specified and directed by Engr-in-charge.

All as per srl item No 5 here-in-before but using old bricks obtained under srl item No 1.00 completed all as specified and directed by Engr-in-charge.

Supply, laying, jointing, testing and commissioning in replacement of LT underground cables 1100 volts grade, PVC insulated XLPE and PVC sheathed, heavy duty armoured, with multistranded aluminium conductors, IS-1554 marked, laid in trenches completed all as specified and directed by Engr-in-charge. Cables of the following sizes:- Note:- Excavation, earth work ,cable protection , sand fillings , cable joint shall be measured and paid separately.

25 Sqmm 4 core

35 Sq mm 3.5 core.

95 Sqmm 3.5 Core

Supply and fixing in replacement LED Street light fitting, made of spun aluminium housing, polycarbonate diffuser protector with IP 65 protection for optical compartment with 120 Watt LED system, CCT 5700K completed all as specified and directed by Engr-in-charge. Note:- Old serviceable LED lights will be deposited to MES Store Yard by the Contractor.

Supply and installation of Decorative Ornamental pole with Double arm bracket as per Lustre item No.Li-8219B-Bkt 04. Total height of the pole with Double arm Bracket shall be 9000 mm nominal above the ground. The pole is made out of Ribbed mild steel tube and cast iron in two steps as shown in attached drawing. Cast Iron embellishments are fitted with the help of grub screws. A built in service window is provided to accommodate a 6 amp SP MCB and 32 amp 3 Phase & Neutral loop in and loop out heavy duty connector for mains connections in the bottom part of the pole as shown in attached drawing. The different sections of the pole are joined together by means of Welded joints. The decorative bracket is made out of mild steel and cast-iron. The mild steel and cast iron parts are joined together & are fabricated to get the desired design as per attached drawing. The decorative bracket should have the arrangement to fix the required luminaire of 120 watt as per Lustre item No LI 90006-120. The bracket should have the arrangement suitable to be fitted on the required pole. The dimensions of the pole and bracket should be as per attached drawing The Decorative Pole and Double arm bracket Shall be machined and Polished properly to give it a smooth Surface. The Decorative pole with Double arm bracket is duly pretreated and painted in U.V. ray resistant P.U. coating in approved color shade. Decorative pole with Double arm bracket shall be installed at desired location including foundation of the pole by making cement concrete foundation as per foundation details shown in the drawing of 1:2:3 (1 cement: 3 course sand : 6 graded stone aggregate 40mm nominal size) with the help of anchor bolts of dia 3/4" x 1200 mm long and GI Sleeve 40mm dia as required at site completed all as specified and directed by Engr-in-charge. Make :- Lustre/Ligman/Homdec/Thorn. Note :- Contractors are advised to obtain proper rates from the manufacturer before quoting the Rate.

Boring of holes under road, pavement, hard standing by trenchless technology including 150 mm dia HDPE pipe suitable for 0.6 mpa working pressure. Note : The Rate for taking permission for concern authority like, Army Signal ,and other utility authority are deemed to be included in the quoted rates. If any utilities like road damaged duinng execution of work , the same will be repair/replaced by the Contractor in quoted rates completed all as specified and directed by Engr-in-charge. NOTES :- (i) The contractor will be responsible for taking permission from appropriate authority i.e. NHAI/IGL/ if needed units, needed for above said work. (ii) Trenchless depth shall not be less than 2 mtr from ground level until or otherwise required due to site requirement and contractor has to maintain the trenchless depth upto 4 mtrs from ground level all quoted rates shall deemed to be included to maintain the trench less depth as directed during excavation to avoid damages to the existing services. (iii) The quoted rate shall deemed to be included for repairs/rectification for damaged done to the existing/ communication and water supply system /sewage system during excavation of work.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel and provision of charcoal dust and common salt packed all around the earth plate including necessary excavation and earth work in any type of soil and testing complete all as specified and directed and shown in electrical plate number 3 of MES SSR part-I(1991) completed all as specified and directed by Engr-in-charge.

Supplying & fixing of time switches astro type in having longitude and latitude of Indian cities in memory 415 V three phase 20 Amp rating with 20 Amps, 415 Volts, three pole contactor fitted inside factory made 2mm thick steel enclosure duly powder coated paintcompleted all as specified and directed by Engr-in-charge.

Note : Contractor should procure and provide 50 % of the material as listed above within 15 days of the placing of work order and shall be verified by the Engr-in-charge.

M/S ADHIKARI CONSTRUCTION CO. (BID ID -3467889)

Microsys Automation India (BID ID -3474275)

Commercial Traders (BID ID -3467180)