Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹13.8 L+₹28,605 (2.12%)Rejected-Finance | L2 | Rejected-Finance Not L1 | |
| 3 | L3₹14.5 L+₹96,310 (7.14%)Rejected-Finance SUBAN BAZAAR DIGLIPUR NORTH ANDAMAN 744202 | DIGLIPUR | NORTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744202 | L3 | Rejected-Finance Not L1 | |
| 4 | L4₹15.5 L+₹2.0 L (14.9%)Rejected-Finance NO 353 DIGLIPUR 1 DIGLIPUR NORTH MIDDLE ANDAMAN 744 202 | NORTH AND MIDDLE ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744202 | L4 | Rejected-Finance Not L1 |
Tender Value
₹13.9 L
EMD Value
₹27,800
Closing Date
2 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER SOUTH DIGLIPUR
Garrison Engineer (South) Military Engineer Services, RK Gram, Diglipur North Andaman - 744 202
PROVISION OF RAIN SHELTER FOR MAIN ENTRANCE GATE AT DIGLIPUR
2022_MES_529075_1
8870/E8
Open Tender
Civil Works
Item Rate
180 days
Diglipur
ALL BIDDERS ENLISTED WITH MES IN CLASS E AND CAT ai AND UNENLISTED BIDDERS MEET MES
ENLISTMENT CRETERIA OF CLASS E AND CAT ai REFER NIT
6 documents required · 6 mandatory
₹500
GARRISON ENGINEER SOUTH DIGLIPUR
₹27,800
Yes
20 Jul 2022
7 Jun 2022
4 Jul 2022
7 Jun 2022
2 Jul 2022
20 Jun 2022
8 Jun 2022 - 13 Jun 2022
60 days
Amount
Excavating in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in soft/ loose soil or hard/ dense soil.
Removing excavated material exceeding 50 mtr and not exceeding 100 mtr and depositing where directed at a level not exceeding 1.5 m above the starting point.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose soil.
Excavating in post holes (or similar holes) each not exceeding 0.5 cu. m, getting out in hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface.
M&L for PCC Type D2, 1:4:8 (using 40mm graded granite stone aggregate) as in foundations, filling and mass concrete.
M&L for RCC M-30 (design mix) (using 20mm graded crushed granite stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.
M&L for RCC M-30 (design mix) (using 20mm graded crushed granite stone aggregate) as in columns, pillars, piers, posts and struts.
M&L for providing steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for flat rough finished surfaces of concrete all as specified.
M&L for providing steel formwork to sides of pillars, posts, struts, piers, columns and stanchions, for square, rectangular or polygonal, fair finished surfaces of concrete all as specified.
S&F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe 410 -W (Gde- E- 250) quality- A.
S&F rolled mild steel work in tubular trusses/ purlins/ columns including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240.
M&L for high yield strength deformed TMT steel bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M&L for high yield strength deformed TMT steel bars 5 mm to 10 mm dia cut to length, bent to shape required, as in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.
S&F Mild steel screw bolts (machine made) of length exceeding 5 cm but not exceeding 10 cm long and diameter of neck in 16 to 20 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, as per manufacturer instructions as specified.
S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, as per manufacturer instructions as specified.
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.
M&L for chequered cement concrete coloured tiles 20cm x 20cm x 25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry on floors/ steps, including screed bed or bedding layer of 15 mm thick in CM 1:4 complete.
M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc.
M&L for PCC Type C1, 1:3:6 (using 20mm graded granite stone aggregate) as in surface channels and drains complete.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
M&L for Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked with valid CML No. in and including PVC casing and caping with all fittings such as internal bend, end caps etc fixed on the surface of wall, ceiling, roof, steel structure etc. by means of suitable fixing accessories, with GI pressed steel / PVC box suitable for modular switches sunken boxes (with earth dolly) covered with logic modular PVC sheet cover for fixing of switches, sockets etc including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:- NOTE: - Switch and socket to be measured and paid for separately. (a) One light point controlled by one 5/ 6 Amps one way switch.
S&F ceiling rose, 3 terminal, PVC/ polycarbonate isolated body.
S&F modular switch flush type single pole, one way 5/ 6 Amp complete.
S&F sheet metal enclosure for 8 way Distribution Board (DB), double door, single pole and neutral with 200 Amps rated bus bar, IP-43 protection suitable for fixing MCBs/ isolators with and including blanking plates complete all as specified and as directed.
S&F MCB, single pole and neutral, 32 Amps, 240 volts, 'C' curve, 10 KA complete all as specified and as directed.
S&F MCB, single pole, 6 to 20 Amps, 240 volts, 'C' curve, 10 KA complete all as specified and as directed.
S&F energy efficient surface and wall mounted LED batten 20 Watts protection with IP65, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. Diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours complete all as specified and as directed. Make: Havells/ Bajaj/ Crompton.
S&F new generation energy saving and environmental friendly 70 Watts flood light fitting long life versatile pressure die-cast aluminium IP65 road way luminaire with high power LEDs as light and electronic driver complete all as specified and directed. Make: Crompton or equivalent in Bajaj/ Philips.
Supply, lay and testing XLPE insulated, cores laid up, PVC innersheated, armoured with aluminium strip, galvanised wire, heavy duty LT UG electric cable with stranded aluminium conductor, 1100 Volts grade, extruded PVC Type ST2 sheathed, conforming to IS: 7098 (Part I) 1988 of cross- sectional area 2 core 10 Sqmm.
M&L for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filled in alternate layers and electrode connections by using Galvanised earth wire 4mm dia and 7.50 mtrs connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire mesh, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance not exceeding 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No. 3 of schedule Part-I (2009).
S&F post top lantern LED type of size 40 Watts with IP 65 protection, inverted pyramid tripod type LED bollard with soft 360 degree light distribution, resistant to impact and corrosion, glare free and better uniformity complete all as specified and directed. Make: Crompton Cat No. LPTO-40-CDL or equivalent in Philips / Bajaj.
M/s SHARMA CONSTRUCTION
MOHAMMED SAFIQUE
M/s Mohammed Shamim
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .