RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Wireless Access Point ( 3 pieces ) ( Under PAC ) Make cisco Model ciscoair-ap2802i-d-k9 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Specification Type of Access Point Controller Based Stand alone
RequiredController Based Deployment Indoor Indoor
RequiredOutdoor 1/5 Mounting Ceiling * Antenna Type Internal * Number Of Radios Dual * Frequency Band 2.4 GHz & 5.0 GHz * Supported Wi-fi Standards 802.11 a/b/g/n/ac
Required802.11ac Wave 1
Required802.11ac Wave 2
Required802.11a
Required802.11b/g
Required8 02.11 b/g/n
Required802.11ac * Wireless Speed Up to (Mbps) 5200 Any applicable text(s) Max Wireless Signal Range im Mts Subjected to end devices (Client) Any applicable text(s) Channel Width (MHz) 160 * Maximum Data Rate MBps 2600 * Supported Encryption WEP
RequiredWPA-PSK
RequiredWPA- TKIP
RequiredWPA2 AES
Required802.11i
RequiredEAP-TLS. WEP
RequiredWPA-PSK
RequiredWPA- TKIP
RequiredWPA2 AES
Required802.11i
RequiredEAP-TLS.
RequiredWEP
RequiredWPA-PSK
RequiredWPA-TKIP
Required802.11
RequiredEAP-TLS
RequiredWPA AES Dedicated Console Port Available * Receiver Sensitivity in db -101 * Transmit power (tx)(dBm) 23 * Radio Resource Management such for power channel
Requiredcoverage hole detection and performance optimization Available * Support for Load Balancing between 2-4 Ghz and 5 Ghz Available * Support for Configurable Carrier Threshold Available * Device Management Web-based Configuration Interface (GUI) * Support for Mesh Networking Not Available * Support for QoS for Voice over Wireless Available * 2/5 Support for MU-MIMO Available * Number of MIMO supported & Spatial Streams 4 X 4 :3 * Number of WLAN (SSID) per AP 16 * Maximum clients Nos 400 * Support for Autonomous access- point option Available * USB Ports Available * Number of 10/100/1000 port 2 * mGig support Not Available * Fiber port (in case of outdoor AP) Not Available * Support for Bluetooth Low Energy (BLE) support on AP Not Available * Support for Beam forming Available * Operate as a sensor for wireless IPS Available * Support for QoS and Video Call Admission Control capabilities Available * Support for Rogue access point detection Available * Support for Wireless Intrusion Protection System Available * WPC certified Yes * Wi-Fi CERTIFIED Yes * Support non-Wi-Fi detection for off- channel rogues and Containment for both radio while serving the client simaltaniously Available * Powering options (Such as AC/DC
Required802/3af PoE
Required802/3at PoE+)
Requiredspecify 802.3at PoE+
Required802.3bt UPoEF * Power POE (Watt) 26.5 * Environmental Standard : plenum- rated (UL2043) for Yes * 3/5 Indoor and IP67 for Outdoor Operating Temperature Range (Degree C) 0 to 40°C * Operating Humidity (%RH) 90 * Dimension (mm x mm x mm) 219.9 x 220.4 x 55.1 * Weight (grams) 1600 * On Site OEM Warranty (Years) 3 1
Required3
Required5 Or higher * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
