Electrification Work on Ram ki Paidi, Ayodhya

Amount

Supply & fixing of All-in-One Solar system with aesthetically CIRCULR design luminaire & 4MTR Solar Pole. Luminous system efficacy-100 Lm/W. Life expectancy above 50,000 hours with 70% lumens (2500 lumens at system level), Colour Temperature: 4000K, Working Humidity: 10% - 90% RH, Working Temperature: -10 to +50 degree, IP67 (min), CRI (Ra) >70. Average lighting beam angle 120degree, Luminaire housing: Pressures die-cast aluminium with corrosion resistance polyester powder coated, Impact Resistance: >IK07, Lamps starting time should not be more than 10 seconds. Thermal management system should be provided and LED must be mounting on heat sink conductive aluminium with suitable large areas surface by means of fins to dissipate the heat to ambient air. Application Standard: Fixture should confirm to applicable IEC 60598-1, IEC 61000-3-2, IEC 61547. Test Compliance for LED is LM 80 (IS-16105) and Test Compliance for Fixture is LM 79 (IS-16106, IEC 60598/IS:10322). Successful tenderer shall submit test compliance at the time of delivery. However, the tenderer shall submit an undertaking for the same at the time of submission of bid. Internal wiring fiber glass insulated multi strand wire. Protections: Overvoltage protection, Short circuit protection, Open circuit protection, Surge voltage as per International Standards. LiFePO4 battery: Battery technology LiFePO4 Battery capacity 60Ah Life cycles 2000 cycles @ 90% DOD IP rating IP67 (Min). Dimension: 120x146x470mm & Weight 8.5 Kg preferably. PV module: PV cell technology mono-Si Watt peak rating per module 180 Wp/23Voc Solar cell efficiency (under STC) 16.40% Number of strings 4 String topology Parallel PV module lifespan 20 years

Providing and laying RCC of concrete grade (M-20) 1:1.5:3 (1 cement :1.5 Coarse sand: 3 stone grit 20 mm gauge nominal size) for foundation of Item Sr No-5 including supply of all materials, labour, tools and plants etc. required for proper completion of work

Supply & fixing of 12.5mtr Highmast shaft of approved make with rising system hot dip glavanized inside & out side dip, having pole sheet thickness 3mm. Top dia minimum 150mm, Bottom dia 310mm base plate 25mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6mm dia, double drum winch, including making suitable foundation as per manufacture drawing/ site reuitment along with foundation bolts nuts, washers, anchor plates, etc. complete in all respect.

Supply & burring of safe earthing electrode (UPPWD & CPRI approved) T-39(Hot-Dip Galvanized),Length upto 3000mm, outer pipe 76mm inner dia 38mm terminal Dia 12mm, outer GI pipe of 16 SWG and inner GI of 12 SWG with Hot Dip Galvanization upto 100 micron filled with crystalline conductive mixture (CCM) having anti corsive & conductive property with 50 kg activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing.

Supply and laying of conductor pvc insulated armoured served sheated cable of size 16Sqmmx4 core with 1100 volts grade at a depth of 750mm below ground level over a cushion of 75mm as etc. complete with all respect.

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing and lenses built with mandatory driver set suitable for 140 to 150 Watt. 1540-16500 system lumens High Power LED with lenses, >110lm/W, PF>0.95, THD <10% at full load, CRI>70, Potted driver Set (NotCircuitory) Phase to phase Protection at 440V & >300V auto cut and re-start feature. with 5 year warrantee. Confirming to IP 66 protection complete in all respect including Labour. Sample approval is must before supply of luminaire.CAT-AAA

Supply & fixing of Integral LED Solar Streetlight Singlr piece Die-cast Aluminium Housing reliable & robust construction, minimum system efficacy of 175Lm/W and total system lumens min. 3000Lm, system wattage 12V DC, 18Watts (+/-5%), SMD LEDs with PMMA Lens plat, External built proper heat sinks and UV stabilized polycarbonate cover IP65 & life of LED luminaire engine should be 50000hrs along with built in high efficiency MPPT charge controller & driver along with LiFePo4 battery chemistry with capacity of 256Wh & high efficiency reliable PV Module suitable for even harsh conditions, CCT >5700K, CRI 70. Solar panel module capacity 12V, 35W peak. The fixture should have designed for Street light application & should have flexible angle of mounting from 0-15 degree adjustable, Arm & Pole Mount for diverse geographical condition. Factory configured LED’s Load & PIR sensor dimming for optimum of autonomy uses up to 24hrs. Dimming profile should be as from dusk –first 05 hours sensor enabled, next 05 hours sensor disabled with fixed at 30% brightness, & next till dawn sensor enabled. System should have smart self-diagnostic feature for indicating battery charging, cut off & fault if any. Company Logo shall be engraved to avoid any distrusts & complete system should have minimum warrantee of 36 months. Standards Compliance: IEC60598-2-3, IEC 62109-1, EN 50530, IEC 61547, CISPR 15, IEC 62133, IEC 61960, UL1642, & IEC 61730-1,2 & IEC 61215. UPPWD AAA Category approval also required.

Supply of fixing of 6mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thick) having 3mm thickness with Double arm bracket 1mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and required T&P complete in all respect.

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing and lenses built with mandatory driver set & WW color temerature, suitable for 70 to 90 Watt. Confirming to IP 66 protection complete in all respect.CAT-AAA

Supply and laying of conductor pvc insulated armoured served sheated cable of size 10Sqmmx2 core with 1100 volts grade at a depth of 750mm below ground level over a cushion of 75mm as etc. complete with all respect.