Preservation /Restoration of Historical Vitasta Shrine and Pehla Darshan Shri AmarNath Ji at Vyeth Vathur Anantnag

Macdamization

Engagement of JCB for clearance of Side berms, removal of humps, making of kucha drain, removal of unhygenic material, scarfying and disposal of the same and like all complete as per the directions of incharge engineer at site ( to be paid as per actual progress, paid upto the maximum of 7 hours subject to Produce of GEO Tagged Photographs during before and after work)

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge

Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface and cleaning with mechanical broom. With medium setting bitumen emulsion On W.B.M. /W.M.M. @ 0.4 Kg/sqm. with medium setting

Providing and laying 50mm bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix).

Providing and laying of 25mm thick semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.25 mm compacted thickness with bitumen of grade VG- 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate)

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.

Providing and laying of RBM/Khakbajri including watering, dressing and compacting with 8-10 tonne road roller with all carriages upto site of work all complete

Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semi- automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Construction of Dharamshala with Lunger, store,kitchen

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete.

Providing and laying of Boulders (75 to 150mm sixe), hand packed, including Levelling , ramming and consoldatingb and carriage of same from approved source upto site of work complete.

P/ L in position cement concrete in 1:4:8(1 cement :4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.

Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete.( All works upto plinth level)

P/ L in position cement concrete in 1:2:4(1 cement :2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.

Centering & shuttering including strutting, propping etc including removal of form work for Foundations,, footings, bases of columns etc. for mass concrete.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Brick work with F.P.S (non modular) bricks of class designation 75 in 1:4 mix (1 cement: 4 coarse sand) including carriage of all materials from approved sources upto site of work complete. All works upto plinth level

Brick work with F.P.S (non modular) bricks of class designation 75 in 1:4 mix (1 cement: 4 coarse sand) including carriage of all materials from approved sources upto site of work complete. All works above plinth level upto level V

Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete.( All works above plinth level upto level V)

Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete.

Centering & shuttering including strutting, propping etc including removal of form work

Columns, pillars, piers, abutments, posts and struts.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls Under 20 cm wide

Providing wood work in frames of doors windows, clerestory windows and other frames wrought framed and fixed in position with hold fasts lugs or with dash fasteners of required dia and length (hold fasts lugs or dash fasteners shall be paid for separately (imported K D wood) including all carriages complete.

Providing and fixing glazed shutters for doors, windows and clerestory windows of using 4mm thick float glass panes including ISI marked M.S. pressed butt shutters in hinges bright finished of required size with necessary screws. Imported kail wood 30mm thickness

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with s of necessary screws, including 12 mm thick prelaminated partcle board decorative lamination on both sides Grade 1 complete as per direction of Engineer-in-charge. imported KD wood 30mm

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of Rate for thickness of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm shutters for doors, windows and clerestory windows with ISI marked M.S. pressed butt 30mm hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge imported KD Wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Pointing with 1:2:1 (1 lime 2 sand 1surkhi) as per conservation and methodology procedure using Gour/Gud, urad Dal, Husk methi Resa, Gealfal and all requirements including head load and scafflolding all completee

12 mm thick cement sand palasterin 1:4 including carriage up to site of work

6 mm thick cement sand palasterin 1:3 including carriage up to site of work

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, , and fixed on wooden /steel frame work, complete as per direction of Engineer-in-charge. 12mm thick commercial ply conforming to IS : 1328 BWR type Incl all carriage.

Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Paanch Murabah

P/F of 12mm thick imported wood paneling of approved pattern over and including base of 10mm thickplywood of standard quality ISI/Iso cetified including cost of cornice, nails, adhesive material and etc. all complete

French spirit polishing, Two or more coats on new works including a coat of wood filler

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of primer of approved brand and manufacture.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.

Painting two or more coats on new work with synthetic enamel paint of approved brand & manufacture to give an even shade

Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with Udaipur green marble

Providing and fixing anchor bolts 16mm Dia. 400mm in length including nuts and washers complete.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.2.1 Riveted Welded

Providing and fixing of 0.5mm thick colour coated high rib iron profile sheets of approved profile as approved by Engineer-in-Charge in roofing including carriage of same upto site of work complete. The sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 mtr or as directed by Engineer-in-Charge. The sheet shall be fixed using self drilling /self tapping screws of size(5.5 x 55mm) with EPDM seal of same colour matching the shade of the sheets. including ridged and valleys

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, inskirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including carriage of materials. Complete job..

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm.

Making plinth protection 50mm thick of cement concrete 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete.

Dry random rubble masonry with hard stone in Soakage Pit using quarry stone with bond stone including carriage. And all leads and lifts complete

Providing wood work frames like Daji Deewari , wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length with all necessary fittings and fixtures and scaflolding all complete First class deodar wood

Providing and fixing aluminum hardware fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.

100 mm handle

200 mm handle

100 mm tower bolt

150mm Tower bolt

Stay Hooks

Door stopers

L drop

P/F of L drop with lockset

Providing and fixing G.I. pipes complete with G.I. fittings & clamps, including cutting and making good the walls etc.

15mm dia concealed in walls

20mm dia concealed in walls

20mm dia Including trenching and refilling

GI Union 15mm Nominal bore

GI Union 20mm Nominal bore

Brass ball value

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore

Providing and fixing C.P. brass fittings of std qualityt or approved quality conforming to IS: 8931.

Bib Cock long Body

Angle value

Wall mixer

Basin Mixer

Soap case

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. 610x510mm bowl depth 200mm.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing & fixing of water heater (gysers) of standard make and quality like including all necesscary fittings like pvc connections incld drilling holes in walls and fixing of gyser bolts including making good the walls were ever required incld carriage up to site of work and testing complete. 50 ltr capacity of std qualityt ISI/ISO cetified

Providing and placing polyethylene water storage tank of approved brand, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes with fittings

Providing/ fixing of looking mirror reactanglar in shape 450x600 mm with attached shelf of standard make and quality.

Providing/ fixing of towel rod 600mm long of standard make and quality

P/F of PVC Floor Trap with Stainless Steel Floor Drainer/ Jali.

P/F of PVC Manhole Covers with frame Heavy Duty 450x450mm.

Providing and fixing PVC pipes and fittings of standard quality Isi/ISO cetified type B

75 mm pipe

Door Tee 100mm size

PVC collar 100mm

PVC collar 75 mm

PVC Reducer 100x75mm

Plain Bend 100 mm size

Plain Bend 75 mm size

Door bend 100mm

Door bend 75mm

S/P Trap 100 mm

S Trap 75 mm

P Trap 100 mm

P Trap 75mm

Cowl & clif

Constrction of brick masonary inspection chambers 450x450x220 inside size using fps bricks in 1: 4 mix and finished inside with 1: 4 cement motar & top lid of ms sheets 4mm thick and angle iron frame 50x50x5 mm and laid on stable foudation on levelled ground

Construction of 06 no washrooms

Engagement of JCB for clearance of malba, diversion of channel making of kucha drain, removal of unhygenic material, sand disposal of the same and like all complete as per the directions of incharge engineer at site ( to be paid as per actual progress, paid upto the maximum of 33hours subject to Produce of GEO Tagged Photographs during before and after work)

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete.

P/ L in position cement concrete in 1:4:8(1 cement :4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.

P/ L in position cement concrete in 1:2:4(1 cement :2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.

Brick work with F.P.S (non modular) bricks of class designation 75 in 1:4 mix (1 cement: 4 coarse sand) including carriage of all materials from approved sources upto site of work complete. All works above plinth level upto level V

Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete.( All works upto plinth level)

Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete.( All works above plinth level upto level V)

Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete.

Centering & shuttering including strutting, propping etc including removal of form work

Foundations,, footings, bases of columns etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls Under 20 cm wide

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position including fixing in soffits, eaves , doors windows and like and applying a priming coat of approved steel primer all complete. Welded

Providing and fixing of 0.5mm thick colour coated high rib iron profile sheets of approved profile as approved by Engineer-in-Charge in roofing including carriage of same upto site of work complete. The sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 mtr or as directed by Engineer-in-Charge. The sheet shall be fixed using self drilling /self tapping screws of size(5.5 x 55mm) with EPDM seal of same colour matching the shade of the sheets. including ridges and valleys

15 mm thick cement sand palasterin 1:4 including carriage up to site of work

Providing and laying Ceramic glazed floor tiles (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.sample to be approved by incharge engineer at site

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Supplying & filling of RBM /GSB incl. spreading, watering , dressing , consolidation incl. cost & carriage of RBM etc complete

Providing and fiixing aluminum Hard ware fiitings

Tower bolt 100mm

Handles 4"

Hooks

Construction of public Convenience

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete.

P/ L in position cement concrete in 1:4:8(1 cement :4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.

RR stone masonary uncoursed brought to courses stones of approved quarry in foundations and plinth laid in dry using bond stones Incl all carriage.

P/ L in position cement concrete in 1:2:4(1 cement :2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.

Brick work with F.P.S (non modular) bricks of class designation 75 in 1:4 mix (1 cement: 4 coarse sand) including carriage of all materials from approved sources upto site of work complete. All works above plinth level upto level V

Brick work with F.P.S (non modular) bricks of class designation 75 in 1:4 mix (1 cement: 4 coarse sand) including carriage of all materials from approved sources upto site of work complete. ( All works upto plinth level)

Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete.( All works upto plinth level

Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete.( All works above plinth level upto level V)

Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete.

Centering & shuttering including strutting, propping etc including removal of form work

Foundations,, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls Under 20 cm wide

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position including fixing in soffits, eaves , doors windows and like and applying a priming coat of approved steel primer all complete. Welded

Providing and fixing of 0.5mm thick colour coated high rib iron profile sheets of approved profile as approved by Engineer-in-Charge in roofing including carriage of same upto site of work complete. The sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 mtr or as directed by Engineer-in-Charge. The sheet shall be fixed using self drilling /self tapping screws of size(5.5 x 55mm) with EPDM seal of same colour matching the shade of the sheets. including ridges and valleys

12 mm thick cement sand palasterin 1:4 including carriage up to site of work

6 mm thick cement sand palasterin 1:3 including carriage up to site of work

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, inskirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including carriage of materials. Complete job..

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing wood work in frames of doors windows, clerestory windows and other frames wrought framed and fixed in position with hold fasts lugs or with dash fasteners of required dia and length (hold fasts lugs or dash fasteners shall be paid for separately (imported K D wood) including all carriages complete.

Providing and fixing glazed shutters for doors, windows and clerestory windows of using 4mm thick float glass panes including ISI marked M.S. pressed butt shutters in hinges bright finished of required size with necessary screws. Imported kail wood 30mm thickness

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with s of necessary screws, including 12 mm thick prelaminated partcle board decorative lamination on both sides Grade 1 complete as per direction of Engineer-in-charge. imported KD wood 30mm

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing aluminum hardware fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.

100 mm handle

200 mm handle

100 mm tower bolt

150mm Tower bolt

Stay Hooks

Door stopers

L drop

P/F of L drop with lockset

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm Jaquar, Hindware, Essel or Equivalent.

Providing & fixing of water heater (gysers) of standard make and quality like including all necesscary fittings like pvc connections incld drilling holes in walls and fixing of gyser bolts including making good the walls were ever required incld carriage up to site of work and testing complete. 50 ltr capacity of std qualityt ISI/ISO cetified

Providing and fixing G.I. pipes complete with G.I. fittings & clamps, including cutting and making good the walls etc.

15mm dia concealed in walls

20mm dia concealed in walls

Providing and fixing PVC pipes and fittings of standard quality Isi/ISO cetified type B

100 dia pipe

75mm dia pipe

Door Tee 100mm size

Door bend 100mm

Door bend 75mm

plain tee 100mm

plain tee 75mm

plain bend 100 mm

Plain Bend 75 mm size

pvc collar 100mm

pvc collar 75mm

pvc reducer 100 x 75

vent cap 75 mm

Floor trap 75 mm

S trap 100 mm

P trap 100 mm

Cowel and clip

Providing and fixing C.P. brass fittings of std qualityt or approved quality conforming to IS: 8931.

Bib Cock long Body

Angle value

Wall mixer

Basin Mixer

Soap case

Coackroach proof CP Grating

providing and fixing of 15 mm dia Gun metal gate valve

providing and fixing of 20 mm dia Gun metal gate valve

Providing and fixing pvc connections of approved make 2 ft.

Construction of 9" thick brick masonary manholes in cement mortar (1:4) mix, foundation cement concrete ( 1:4:8) ,12 mm thick inside cement plaster with finishing, making channels in cement concrete ( 1:2:4) etc all complete job of size (600x 600x 450 mm ) incld man hole cover of approved brand

Providing and Placing in terrace PVC storage tank with cover and suitable locking arrangement incl. making necessary holes for inlet, outlet and over flow pipes incl. all fittings & Ball cock of approved size

Supplying & filling of RBM /RBM incl. spreading, watering , dressing , consolidation incl. cost & carriage of RBM etc complete

providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, including all carriages

Providing and fixing cast iron man hole covers of required size and shape i/c removal of old damaged covers all complete

Construction of security picket

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete.

P/ L in position cement concrete in 1:4:8(1 cement :4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.

Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete.( All works upto plinth level

Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete.( All works above plinth level upto level V)

P/ L in position cement concrete in 1:3:6(1 cement :3 coarse sand : 6 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.

Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete.

Centering & shuttering including strutting, propping etc including removal of form work

Foundations,, footings, bases of columns etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platforms.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

colums,pillars.piers,abuts

Brick work with F.P.S (non modular) bricks of class designation 75 in 1:4 mix (1 cement: 4 coarse sand) including carriage of all materials from approved sources upto site of work complete. .(above plinth upto level V)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position including fixing in soffits, eaves , doors windows and like and applying a priming coat of approved steel primer all complete. Welded

Providing and fixing of 0.5mm thick colour coated high rib iron profile sheets of approved profile as approved by Engineer-in-Charge in roofing including carriage of same upto site of work complete. The sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 mtr or as directed by Engineer-in-Charge. The sheet shall be fixed using self drilling /self tapping screws of size(5.5 x 55mm) with EPDM seal of same colour matching the shade of the sheets. including ridges and valleys

Providing and fixing 0.5 mm thick colour coated sheets of standard quakity approved brand and manfacturer and finish for Eaves and Soffit with frame work for base incl. joists with M.S. screws.

12 mm thick cement sand palasterin 1:6 including carriage up to site of work

6 mm thick cement sand palasterin 1:3 including carriage up to site of work

Providing & laying stone dust/RBM below foundation & rooms includingleveling, watering ramming and carriages from approved source to site of workcomplete job

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Construction of 2 no crossing

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete.

P/ L in position cement concrete in 1:4:8(1 cement :4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.

P/ L in position cement concrete in 1:2:4(1 cement :2coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.

Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete.( All works upto plinth level

Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete.( All works above plinth level upto level V)

Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position including fixing in soffits, eaves , doors windows and like and applying a priming coat of approved steel primer all complete. Welded

Centering & shuttering including strutting, propping etc including removal of form work

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platforms.

providing and filling of RBM/quarey metal mixed with quary muck including bwatering , leveling and consoldating in layers not exceeding 30 cm in depth with 8-10 tonne road roller all complete as per the direction of incharge engineer at site

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of primer of approved brand and manufacture.

Providing and fixing of sighn board and taking photofraphs before during and after execuation all complete as per directions

Construction of Devri gate

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete.

P/ L in position cement concrete in 1:4:8(1 cement :4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.

Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete.( All works upto plinth level

Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete.( All works above plinth level upto level V)

Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete.

Centering & shuttering including strutting, propping etc including removal of form work

Foundations,, footings, bases of columns etc. for mass concrete.

Arches, domes, vaults upto 6 m span

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed fine chisel dressed

Providing and laying rough chisel dressed Devri Stone cornice of thickness 75mm face chamfer in cement mortor 1:6 all complete as per the directions of incharge engineer at site

Providing installation of advertisement board with 3D letters with minimum thickness of 3 mmAcrylic kletters with lazer cutting including 50 mm raizing back side sun board channel letters.inside LED and power supply wiring using copper wire 1.5 sq mm for external wiring size 12 intches including frame work and fixing chages and testing with maintance upto DLP

Construction of Devri path

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, lead upto 50 meter and lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil

Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete.

P/ L in position cement concrete in 1:4:8(1 cement :4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.

Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed fine chisel dressed

Extra for chisel dressed Devri Stone in square or rectangular Pillars

Construction of boundary wall / Development of spring

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. 2.7.1 All kinds of soil :

Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete.

P/ L in position cement concrete in 1:4:8(1 cement :4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.

P/ L in position cement concrete in 1:2:4(1 cement :2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.

Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete.( All works upto plinth level

Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete.

12 mm thick cement sand palasterin 1:6 including carriage up to site of work

Centering & shuttering including strutting, propping etc including removal of form work

Foundations,, footings, bases of columns etc. for mass concrete.

Columns, pillars, piers, abutments, posts and struts.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position including fixing in strash guard,railings,gates and like and applying a priming coat of approved steel primer all complete. Welded

Engagement of JCB for clearance of Side berms, removal of humps, making of kucha drain, removal of unhygenic material, suprooting of trees,stums and disposal of the same and like all complete as per the directions of incharge engineer at site ( to be paid as per actual progress, paid upto the maximum of 15hours subject to Produce of GEO Tagged Photographs during before and after work)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of primer of approved brand and manufacture.

Raking out of joint of stone masonry surface to the required width and depth with due care and precionby mech/manual means including preparing, cleaningthe surface for repointing/refilling of joints including disposal of rubish material all complete

Pointing on cement work with cement mortor 1:3 raised and cut pointing

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Development of water channel

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete.

P/ L in position cement concrete in 1:4:8(1 cement :4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.

P/ L in position cement concrete in 1:2:4(1 cement :2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.

Centering & shuttering including strutting, propping etc including removal of form work

Foundations,, footings, bases of columns etc. for mass concrete.

Landscaping /seating

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. 2.7.1 All kinds of soil :

Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge (cost of sludge, dump manure or/and good earth to be paid separately) (available filling out of excavation to be levelled in low lying areas)

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : All kinds of soil

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Supply and planting of various plants, trees and shrubs incl, digging pits( 300x300x450mm size) incl. refilling of pits and watering as per direction of Engineer Incharge (in poly bags) incl. all carriages involved complete incl maintenance for six months

Hydrangea normal

Largerstromia 4' ht above

Bottle brush 4 ht, above

Italian cypress 4' ht. above

Judas tree 4' ht above

Laurel green 4, ht, above

Karria japonica 4' ht. above

Snow ball 4 ht above

Standard rose 4' ht. above

Rose creeper

Sparia all colours 4' ht. above

Forysthela 3' ht above

Box tree 2 ht. above

Thuja 2 ht. above

Oleander 3 ht. above

Brooms 2' ht. above

Golden privet 2' ht. above

Chineese palm 2' ht. above

Standing rose 3' ht. and above

Rose marry 2' ht. and above

Microphlla 1' ht. and above

Supply of Vermicompost

Supply of Bamboo Supporting sticks of upto 4 feet height

Structural steel work in built up single sections and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture

Supply,Providing and fixing of 3 Seater Tourist Benches made of Angle Iron / Hollow Steel Section (10 Rows incl. c/ o two or more coats of Paint over Priming Coat and Plcing in position ) with sides of cast iron frames and carraige all complete, Size shape and Design to be approved by Engineer in Charge.

Information board

Providing Retro-reflective regulatory sign board of size 900mm diametermade out of 2mm thick aluminum sheet, face to be fully covered with highintensity encapsulated lens type retro-reflective sheeting as approved byEngineer-in-charge. Letter, symbols, borders, etc. will be as per IRC:67\with required colour scheme on the boards and with the high intensitygrade A. the aluminum sheet to be riveted to M.S.frame of angle iron ofsize 40x40x4mm. The boards will be fixed to 1 No. 50x50mm square postmade of M.S. angle 50x50x4mm, 4m long welded to the frame withadequate anti-theft arrangement. Sheet work to be painted with two ormore coats of synthetic enamel paint over an under coat (primer) and back side of aluminum sheet to be painted with two or more coats of epoxypaint including appropriate priming coat complete in all respects as perdirections of Engineer-in-charge.

Providing of detailed drawings / design for construction of Dharamshala, with lunger shed , store and kitchen, Public conveyence , security picket,etc and as per the site requirements from approved consultantacy with third party vetting

Please Enable Macros to View BoQ information