Installation of poles, lights with phase wires in wards 133 to 147 of the Hawa Mahal-Amer zone. Year 2026-27

(67.6.2) 88.9 mm OD x 3.25 mm thickness

(67-12-2) LED Street Light fixture with Minimum lumen output 3700 lm

(67-12-5) LED Street Light fixture with Minimum lumenoutput 8700 lm

(67-18-3) 32 mm Dia.

(67-17-3) 200 mm X 200 mm X 122 mm

(67-5-1) 7.5 Mtr. ( 410 SP - 5 )

(68-1-2) 9.0 Mtr long PCC pole of 200 Kg Working Load

(68-3-3) Suspension clamp with eye hook & Pole clamp

(68-3-4) Dead end clamp with eye hook & Pole clamp

(68-24-2) 1 X 25 sq. mm. + 1X25 sq. mm. (insulated)

(53.1.1) 1 x 1.5 sq.mm

(55-1-1-2) 6 A to 32 A rating

(58.15.1) Suitable for 3 kw load direct lighting load (single phase)

(60.1) Add extra in item no. 60.1 to 60.4 for Laying Charges for cable through Manual Boggi by making pit at regular interval and repairing the pit after laying of cable with PCC/ Bitumin as required.

(60-2-3-1) 10.0 Sq. mm X 2 core

(60-2-4-3) 16.0 Sq. mm X 4 core

(63.2) Plate Earthing as per IS:3043 with Hot dipped G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and eEngineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

(57.1) SITC of IP-42 and general construction confirming to IS:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and Other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:- (a)Thickness of CRCA sheet shall be 2.0 mm, cable alley compartments having concealed hinged type knockouts for cables shall be provided (b)complete panel shall undergo a process of degreasing, Water rinsing, Activation, derusting, pickling in acid bath, phosphatising & 3mm thickness ,required hardware , concealed hinged [c) Interconnection between bus bar and switchgears /cable shall (g) Tests: The insulation resistance (with 1000 V Megger) and High (h) only outer surface area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator only (CPRI Test certificates to be Annexure "A" attached with this BSR .

(57.2.1) Electrolytic grade Aluminium bus bar 6010 grade

(57.20.3) One day & week reserve (digital type )

(58.3.1.3) 125 Amp , 25 kA, adjustable O/L & adjustable S/C setting,

Item Rate BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (PART-B) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) (NON BSR ITEM)

NUMBER #

I)- Inter-connections shall be with 7/0.44 mm PVC copper wire duly Crimped with al. Lugs. J) Supply & Fixing Danger Plates as per specification.

Please Enable Macros to View BoQ information