Misc. repair and maintenance Civil works required for Production area like Machine foundation, provision of sound proof wall, shed, MS works, flooring etc. with other allied works at different locations inside HAL factory Lucknow

Demolishing cement concrete 1:3:6 or richer mix/ RCC of any description (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead including disposal of unserviceable material, cost of all labours, scaffolding, T & P etc. all complete at all height as per specification of CPWD or as directed by Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m all kinds of soil, complete for foundations, column footing, wall foundation, manholes, post holes, trenches etc. including spreading, levelling, watering and well ramming in layers not exc. 25 cm. dewatering if required, dressing the sides, dispoal of excess surplus soil, including cost of all labours, materials, compaction equipments, machineries, transportation, T&P etc.as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing & laying PCC: 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, column, footing, trench, appron,floor,under ground tank, post hole, platform under floors or any other similar description of works eg. drains, pipe lines bedding layers, road, chambers excluding the cost of centring and shuttering, including form work, compaction, curing, materials, labour, mechanical mixing, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing and laying bricks (non modular) of class A designation 7.5 (having crushing strength 75 Kg/cm²) work in cement mortar in CM 1:6 ( 1 cement : 6 coarse sand) in foundation, drains, manholes, chambers, ducts, chiiled water trench, toe wall, water tank, etc or any description of similar works, including necessary cutting of bricks as required, wastages, straight or curved, work up to any height or depth, cost of scaffolding, raking out joints up to 1 cm depth as the work proceeds, cost of material, labour, T&P, curing, wastage, transportation, loading, unloading, etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Use and waste form work of steel / wooden form work for all types of suspended slab, Foundation etc. Centring and shuttering including strutting, propping etc. and removal of form work for :, complete including cost of all materials, labour, T&P, wastages etc. all cost of material, labour, T&P, curing, wastage, transportation, loading, unloading, etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and laying deformed or twisted steel reinforcement ISI mark TMT Bars of make RINL/SAIL/TISCON/, as approved by EIC of any dia as per IS 1786 ( latest version) for all type of R.C.C works, straighting, cut to length, bend to shape required, including cranking, welding, bending spirally or hooping providing spacers / chairs and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it, including cost of all labour, material, loading & unloading, welding,T&P, wastage, transportation etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources pavement including labour, material, T&P etc. all complete all as per specifications, drawings and as directed by Engineer-in-Charge (EIC).

Local Sand filling in plinth including supply of neccasary quantity of sand from the site of work 8km and including watering dessing etc. cost of material, labour, T&P, curing, wastage, transportation, loading, unloading, etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources), including making of pocket for grouting/inserting of machine nut bolt if required etc all complete including cost of all materials , labours, T & P, cutting, wastages etc. complete at all height as per drawing, specification and as per direction of E.I.C.

Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls/ceiling, of rough / fair faces of brick wall / concerete surface of any description including jambs, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement, including cost of all labour, material, scaffolding, curing, hacking of concrete surfaces, wastages, making joints/grooves (if required), T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Removal of Debris up to a lead of 5.00 KM including Loading , Unloading, transportation, disposal at directed place including cost of all labours, T & P etc. all complete as per specification of CPWD and as directed by Engineer-in-charge.

Surface dressing of uneven surface not exc. 15 cm deep, cutting & filling, including cutting of wild growth, jungle, cutting and uprooting of plants/ wild vegetation etc. also removal of surplus earth, wild growths, plants etc as directed by EIC upto lead of 50 Mtr and lift upto 1.5m or part there of, including cost of all labours, materials, equipments, machineries, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing and applying two coats of synthetic enamel paint on wall / wood/ steel surface of any description any girth at any height with first quality synthetic enamel paint of Asian / Shalimar / Berger/ ICI/ Dulux etc of approved tint and including preparing of surface by sand papering, removing oil/ smudge marks, filling, touching, including cost of all labours, materials, scaffolding and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.

Wall painting with acrylic emulsion paint, two or more coats having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour including cost of providing covering the existing furniture , machine etc. and cleaning the paint splashes from the floor/ doors/ windows etc including cost of all material, labours, ladders / scaffoldings, brushes, T&P etc. complete at all height as per specification, drawing and as directed by Engineer in charge.

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of Asbestos Cement sheet/ FRP sheet/ galvalume sheet or of any description carefully and placing at directed place including all T&P, labour, material, scaffolding etc all complete work at all heights etc as per specification, drawing and as directed by Engineer in charge.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing, Fabricating & fixing of Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting,welding, cut to shape, bending, fixing in position and applying a priming coat of approved steel primer all complete, MS Roof Truss (framed), purlins, crain, gantries, rails & fasteners and heavy bracket framing beam, Tee, angle, channel, tubular, rectangular, square, flat, (all required sections including distance pieces, cleats, base plates, nut bolts, tie road, foundation bolt etc), including cost of all labour, material, T&P, erection, wastages, transportation, loading, unloading, cartages, etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Taking out existing wooden / Aluminium door shutter, repair by cutting, resizing, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of old hinges with SS screw by SS hinges and screws etc. as required, including cost of all labours, materials, cutting, wastages, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including disposal of malba.

Providing & applying two or more coats with ready mixed Premium acrylic emulsion paint (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives of first quality of approved shade and make like apex ultima of Asian /weather coat long life of Berger / weather shield max of ICI etc including one coat of primer , preparation of surfaces, by brooming down, removal of flakes , oil ,grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposingRubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffolding, cost of all labours, materials, loading, unloading, scaffolding, wastages, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material).-

Providing and laying factory made chamfered edge Cement Concrete paver blocks, 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern in footpath, approach, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, including cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before precurement of material)

Providing and fixing 40 mm wide and 4 mm thick glass strips in joints of cement concrete floors fixed at 1.20 by 1.20m distance both ways or as per site requirement including cost of materials, labour, wastages, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and fixing Vertical venetian blinds of 75 / 100mm width of approved colour & texture/pattern ( approved designs printed / plain) including its hardware mechanism of repuated manufacturer such as Vista, Aerolux , MAC or as approved all complete with material , fixing, fixing accessories, making holes in concrete / brick wall, making good, wastage etc. including cost of all materials , labours, T & P, cutting wastages, making provisions for harware fittings, etc all complete at all height as per drawing, specification and as per direction of E.I.C. The pattern, desing, colour etc shall be approved by EIC.. (sample is to be approved before procurment from reputed manufacture )

Providing and laying 02mm thick heavy duty homoeneous , heavy duty, industrial use ans fiexible Non directional, multi - colour polymer chips, PUR surface protection , homogeneous flooring rolls in width of 2mtr and continuous length of 20mtrs laid in floors/ skirtings , surface elect rical resistance of 100 Ohms to 1000 Ohms and in approved design and shade, as per the design of approved make such as adventus series of wonder floor/ Armstrong/ Responsive SPICS RQ brand or as approved by EIC make conforming to IS Standards in roll form with suitable adhesive and joints thermo welded to form seam less surface, including removing of existing PVC/ESD/ or any other description flooring and deposited the same as directed lace, cleaning of surface and preparation of surface to receive the floor, filing of minor pits / holes if any with Birlaputty/cement mortar etc. including cost of all material , labour,cutting wastages, T&P etc, complete all as required and directed by EIC.

Providing and fixing of Acoustic single leaf door of 75 to 85mm thick achieving sound reduction of upto 45 to 50 STC. Double rebated, hollow GI metal acoustic door, sheet thickness-frame 1.6mm & shutter- 1.2mm, infill-rockwool 96kg/cum densityslab, finish-powder coated, SS ball bearing hinges/ heavy duty SS hinges of size 150 X 76 X 4mm (approx.) or heavier, door closer with STD arm of heavy duty, 5mm thick toughened double glazed, dead lock & key of make Godrej, SS 'D' type pull type handles on both sides-300mm long, automatic door bottom seal, smoke & air tight seal. Three side frame and drop seal below will be provided along with the door with high load bearing hinges. The wall can also be finished with POP finish after the installation, all complete as per manufacturer's specification and direction of Engineer-in-Charge.

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge.- For door/ window/ clerestory window

Total (A)

Above

HAL-AD/9904/4848/CE/2026

Misc. repair and maintenance Civil works required for Production area like Machine foundation, provision of sound proof wall, shed, MS works, flooring etc. with other allied works at different locations inside HAL factory Lucknow

Description

Name of the Individual / Firm / Company: * Mandatory

Type of ownership Pvt. Ltd. / Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

Contact details

Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-

Constitution, legal status and Power of attorney in case of Pvt. Limited/ limited companies

Registration with HAL / other organization if any

Copy of PAN No./GIR No. registration certificate issued by Income Tax Authority

GSTIN number along with the registration copy of the same.

SAC (Service Accounting code) for the subject work is SAC 995419

Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.

List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.

Essential Criteria

Average annual financial turn over during the last 3 years, ending 31st March 2025 of the previous financial year [ should not be less than 30% of Amount put to tender]

EMD of Rs.90560.00

The Solvency required will be 40% of the approx. estimated amount put to tender ie Rs. 18.11 lakhs. The solvency certificate shall from a nationalized or scheduled bank and issued within a period 12 months from the final date of submission of tender. The solvency certificate shall be issued in general stating “ To whomsoever” or specific to HAL-AD Lucknow.

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]

(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.

(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.

(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Details of person holding the power of Attorney (If different from contact person)

DECLARATION I

DECLARATION II

DECLARATION III