REPAIR/MAINT OF SUBMERSIBLE PUMP SET, MONO BLOCK PUMP SET, HORIZONTAL SUBMERSIBLE PUMP SET, WATER FOUNTAIN, DOL/STAR- DELTA STARTER AND OTHER MACHINARIES OF WATER SUPPLY SYSTEM WITH CERTAIN CONNECTED WORKS AT EAST OF MG ROAD UNDER GE E/M LUCKNOW

Amount

Taking down / Dismantling of Oil immersed starter electrically & mechanically of capacity 7.5 HP to 30 HP of any make /size and transporting from Pump House to Contractor's work shop for carryout necessary repair and overhauling, including re-assembling complete all as specified and directed. Note:- (i) New spares/ parts shall be measured & paid separately for unserviceable parts vide BOQ item No 2 to 12 listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete. (iii) Starter of make L&T / BCH / Jyoti provided at site. All spear parts of starter shall be of make as recommended by OEM and approved by GE.

Supply only set of fixed and moving Contact complete all as specified and directed

Supply only of base Plate assembly complete all as specified and directed

Supply only set of auxiliary switch I No (Normal open contact) + 1 NC (Normal closed contact) complete all as specified and directed

Supply only magnet coil with auxiliary winding rated 415V, AC, 50 Hz complete all as specified and directed

Supply only thermal overload relay type RB-1, 63 range 25 to 40 Amp or 36 to 60 Amp complete all as specified and directed

Supply only start & Stop Switch complete all as specified and directed

Supply only thermal time delay, relay without transformer type RZ-12 having actuating time range 3 to 12 second complete all as specified and directed

Supply only kit kat fuse suitable for 25 HP starter complete all as specified and directed

Supply only terminal links RYB & Delta complete all as specified and directed

Rewinding of unserviceable / burnt auto transformer with existing size of winding wire complete all as specified and directed

Supply only reset push button assembly complete all as specified and directed

Transportation of submersible pump and motor set complete 20 HP to 30 HP 3 phase, from pump house to contractor's work shop, dismantling for carrying out necessary repairs / renewal of parts of motors or pump and reassembling complete motors/pump sets & depositing the same after necessary repair to site complete all as specified and directed. Note:- (i) New spares/ parts shall be measured & paid separately for unserviceable parts vide BOQ item No 14 to 35 listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete. (iii) Submersible pump of make Kirloskar / KSB / Shakti provided at site. All spear parts of Submersible pump shall be of make as recommended by OEM and approved by GE.

M&L for cutting out the burnt existing winding of stator of submersible motor of any make and rewinding with the same size of , copper winding wire, etc as per existing complete all as specified and directed.

Straightening only of the slots of stator of submersible motor complete all as specified and directed

Supply only thrust bearing with block complete assembly for submersible motor, complete all as specified and directed.

Renewal only of worn out gun metal bushes for submersible motor as per manufacturer's design complete all as specified and directed.

Supply and fixing in repairs PVC sheathed and PVC insulated, flat, copper conductor submersible cable 3 core of 6 sqmm size, 8 mtr long complete with suitable clips, complete all as specified and directed.

Supply only sand guard of submersible motor complete all as specified and directed

Supply only sleeves of end plates of submersible motor, complete all as specified and directed

Supply only cable grommet (guard) complete all as specified and directed

Supply only water seal complete all as specified and directed

Supply only of Wedges of slots complete set for motor complete all as specified and directed.

Complete overhauling of submersible pump by carrying out, balancing of pump shaft and cutting of key slots, repairs to bowl assembly, rethreading of wornout studs holes and provding over size studs with nuts complete all as specified and directed.

Re-metaling of motor shaft, turning to bring it to original size and shape and polishing of shaft of submersible motor complete all as specified and directed.

S & F in repair of broken PUMP shaft with new piece, making key slot, grinding to make coupling size, and balancing the rotor complete all as specified and directed.

Supply & fixing in repair coupling of submersible motor and pump with key complete all as specified and directed

Supply only bowl bushes complete all as specified and directed

Supply only neck ring complete all as specified and directed

Supply only steel distance pieces & key complete all as specified and directed

Supply only impellor gun metal as per existing complete all as specified and directed

Supply only cast iron, bowl complete all as specified and directed

Supply only CI, non return valve of required dia complete all as specified and directed

Jointing of 3 core cable of any size by using puncture/ rubber compound roll & tape / Sealing compound, complete all as specified and directed.

M&L for Complete removal of old paint from motor and pump set and applying two coat of synthetic enamel paint (1st quality) over a coat of metal primer (hammer tone finish) complete all as specified and directed. Note:- Painting shall be done by spray machine.

Transportation of submersible pump and motor set complete 15 HP / 10 HP / 7.5 HP 3 phase, from pump house to contractor's work shop, dismantling for carrying out necessary repairs / renewal of parts of motors or pump & depositing the same after necessary repair, reassembling complete all as specified and directed at site. (i) New spares / parts shall be measured & paid separately for unserviceable parts vide BOQ item No 37 to 58 listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete. (iii) Submersible pump of make Kirloskar / KSB / Shakti provided at site. All spear parts of Submersible pump shall be of make as recommended by OEM and approved by GE.

M&L for cutting out the burnt existing winding of stator of submersible motor of any make and rewinding with the same size of , copper winding wire, etc as per existing complete all as specified and directed.

Straightening only of the slots of stator of submersible motor complete all as specified and directed.

Supply only thrust bearing with block complete assembly for submersible motor, complete all as specified and directed.

Renewal only of worn out gun metal bushes for submersible motor as per manufacturer's design complete all as specified and directed.

Supply and fixing in repairs PVC sheathed and PVC insulated, flat, copper conductor submersible cable 3 core of 6 sqmm size, 8 mtr long complete with suitable clips, complete all as specified and directed.

Supply only sand guard of submersible motor complete all as specified and directed

Supply only sleeves of end plates of submersible motor complete all as specified and directed

Supply only cable grommet (guard) complete all as specified and directed

Supply only water seal complete all as specified and directed

Supply only studs with nuts of required length & dia , complete all as specified and directed

Re-metaling of motor shaft, turning to bring it to original size and shape and polishing of shaft of submersible pump complete all as specified and directed.

Supply & fixing in repair coupling of submersible motor and pump with key complete all as specified and directed.

M&L for repair of submersible pump by carry out, balancing of pump sgaft and cutting of key slots, repair to bowl assmebly, rehreading of wornout studs holes nd providing over size studs with nuts complete all as sepcified and directed.

Supply only bowl bushes complete all as specified and directed

Supply only neck ring complete all as specified and directed

Supply only steel distance pieces & key complete all as specified and directed

Supply only impellor gun metal as per existing complete all as specified and directed

Supply only cast iron, bowl complete all as specified and directed

Supply only CI, non return valve of required dia complete all as specified and directed

Supply only Head extension (cast iron) complete all as specified and directed.

Jointing of 3 core cable of any size by using puncture/ rubber compound roll & tape / Sealing compound, complete all as specified and directed.

M&L for Complete removal of old paint from motor and pump set and applying two coat of synthetic enamel paint (1st quality) over a coat of metal primer (hammer tone finish) complete all as specified and directed. Note:- Painting shall be done by spray machine.

Transportation of Centrifugal pump set / monoblock pumpset / Horizontal submersible pump set- 10HP to 20HP, AC, 3 phase, 415 / 420 V from pump house at any location / Yard transporting to contractor's work shop, dismantling for carrying out necessary repais / renewal of parts of pump and depositing the same after repair, reassembling complete to site complete all as specified and directed. Note (i) New spares/ parts shall be measured & paid separately for unserviceable parts vide BOQ item No 60 to 74 listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete. (iii) Submersible pump of make Kirloskar / KSB / Shakti provided at site. All spear parts of Submersible pump shall be of make as recommended by OEM and approved by GE.

Cutting out the existing winding of the motor, opening of winding, re winding of motor with same size of winding wire as existing including varnishing, drying and making connection complete all as specified and directed.

Repairing of pump by rethreading of worn out studs holes and S&F over size studs with nut and washer complete all as specified and directed.

Supply only driven end bearing of motor shaft complete all as specified and directed.

Supply only non driven end bearing of motor shaft complete all as specified and directed.

Rematelling and repairing of pump shaft , complete all as specified and directed

Supply only gun metal / stainless steel bush of pump shaft complete all as specified and directed.

Supply only of gland and packing complete all as specified and directed.

Supply only CI impeller of similar make complete all as specified and directed.

Supply only connection plate complete all as specified and directed.

Supply only coupling with studs between motor & pump complete all as specified and directed.

Supply only cover sleeve of motors as per existing size complete all as specified and directed.

Re-metaling of pump shaft, turning for bring it to Internal dia size of bearing in rear end cover complete all as specified and directed.

Supply only neck ring complete all as specified and directed

Taking down & removing of Centrifugal pump set / monoblock pumpset / mono sub (openwell) pump set from its existing position and re-fixing of repaired pump set including renewal of worn out nuts & bolts and electric connection complete all as specified and directed.

M&L for Complete removal of old paint from motor and pump set and applying two coat of synthetic enamel paint (1st quality) over a coat of metal primer (hammer tone finish) complete all as specified and directed. Note:- Painting shall be done by spray machine.

Transportation of Centrifugal pumpset/ monoblock pump sets/ mono sub. pump set 1 HP to 3 HP, AC, Single phase, 220/240 V from pump house at any location/Yard in Cantt area contractor's workshop, dismantling for carrying out necessary repais / renewal of parts of pump and depositing the same after repair, reassembling complete all as specified and directed. Note:- (i) New spares/ parts shall be measured & paid separately for unserviceable parts vide BOQ item No 76 to 87 listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete. (iii) Submersible pump of make Kirloskar / KSB / Shakti provided at site. All spear parts of Submersible pump shall be of make as recommended by OEM and approved by GE.

Cutting, opening of winding, re- winding of Centrifugal pumpset/ monoblock pump sets/ mono sub. pump set of any make and rewinding with same size of copper winding wire, varnishing, backing complete all as specified and directed.

Repairing of pump by rethreading of worn out studs holes and S&F over size studs with nut and washer. Balancing and repairing of pump shaft, complete all as specified and directed.

Supply only water seal and packing complete all as specified and directed.

Supply only driven end bearing of pump shaft, complete all as specified and directed.

Supply only non driven end bearing of pump shaft, complete all as specified and directed.

Supply only cooling fan, complete all as specified and directed.

Supply only cooling fan cover, complete all as specified and directed.

Supply only CI impeller of as make complete all as specified and directed.

Supply only connection plate, complete all as specified and directed.

Supply only capacitor of required capacity, complete all as specified and directed.

Taking down & removing of Centrifugal pump set / monoblock pumpset / mono sub (openwell) pump set from its existing position and re-fixing of repaired pump set including renewal of worn out nuts & bolts and electric connection complete all as specified and directed.

M&L for Complete removal of old paint from motor and pump set and applying two coat of synthetic enamel paint (1st quality) over a coat of metal primer (hammer tone finish) complete all as specified and directed. Note:- Painting shall be done by spray machine.

Supply and fixed in repairs Single Phase Preventor complete all as specified and directed.

Supply and fixed in repairs star delta starter fully automatic oil cooled with auto transformer and first filling of transformer oil complete with suitable size cable for connection between starter to auto transformer suitable for 20 to 25 HP, 3 Phase, 415 V electric motar including necessary connection and fixed on stand made out of angle iron 40 X 40 X 4 mm size complete all as specified and directed.

Supply and fixed in repairs star delta starter fully automatic oil cooled with auto transformer and first filling of transformer oil complete with suitable size cable for connection between starter to auto transformer suitable for 30 to 35 HP, 3 Phase, 415 V electric motar including necessary connection and fixed on stand made out of angle iron 40 X 40 X 4 mm size complete all specified and directed.

M&L Mild screw nut, bolts with washer 12 mm dia and 100 mm long ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed

Supply & fix in repairs electronic control timer type ET-100 of suitable capacity as required at site, complete all as specified and directed.

S&F of submersible flat copper stranded cable 1100 Volt grade of size 16 sqmm 3 core complere all as specified and directed.

S&F of submersible flat copper stranded cable 1100 Volt grade of size 10 sqmm 3 core complere all as specified and directed.

S&F tail pipece in replacement Made out MS ERW pipe heavy Grade 100 mm dia upto 1.5m in length suitable for submersible pump upto 30 HP including making arrangements for fixing of tie rod, cutting thread & welding flange all as sper siterequirement complete all as specified and directed.

Disconnection of submersible pump set of any size from existing system water supply & electrical and Taking out / Uplifting the U/S pump set from deep borewell with disconnected from lowering pipe line of any size with manual or suitable electric driven chain pully upto 240 ft depth reassembling after neccesary repair and re-lowering the pump set in same borewell re-connection of complete all as specified and directed. Note:- i) Repair of U/s pump set will be paid separately. (ii) All type of T/P required to complete the job will be arranged by contractor. (iii) Items required for motor connection such as PVC insulation tape, tie rod, valcanised rubber / puncture tube etc will be provided by the contarctor to complete the work and rate as deemed to be quoted in unit rate no extra payment will be made to the contractor. (iv) Repairing of pump, submersible cable, nut bolt, rubber joint will be measured & paid separately under respective items of this BOQ hereinbefore

S&F (in repair) rubber gasket 3 mm thick (packing ring) suitable for 100 bore flange lowering pipe cut type complete all as specified and directed

S&F (in repair) rubber gasket 3 mm thick (packing ring) suitable for 150 bore flange lowering pipe cut type complete all as specified and directed

S & F in repair, submersible pump assy upto 12 stage not less than 07 stages including bearing bush , shaft , bowls , thrust bearing , bronze impellers of pum etc comprising / suitable arrangement for directly coupled with motor of cap 15 Hp cast iron body suitbale for 300 mm dia borewell multistage , and complete with suitable end connecting tail piece, NRV complete all as specified and directed.

S & F in repair, submersible motor assy o capcity 15 Hp with stator including insulated copper winding , rotor , bearing , bush , thrust plate terminal plate and casing of motor comprising with arrangement of direclty coupled with pump cast iron body elecric driven 415V, TP along with connecting tail piece , NRV and submersible cable aluminium 7.5 RM complete all as specifed and directed.

S & F in repair , submersible pump assy upto 12 stage not less than 07 stages including bearing bush , shaft , bowls , thrust bearing , bronze impellers of pum etc comprising / suitable arrangement for directly coupled with motor of cap 25 Hp cast iron body suitbale for 300 mm dia borewell multistage , and complete with suitable end connecting tail piece , NRV complete all as specified and directed.

S & F In repair, submersible motor assy o capcity 25 Hp with stator including insulated copper winding , rotor , bearing , bush , thrust plate terminal plate and casing of motor comprising with arrangement of direclty coupled with pump cast iron body elecric driven 415V, TP along with connecting tail piece , NRV and submersible cable aluminium 7.5 RM complete all as specified and directed.

Attending the complaint of Oil immersed star delta starter with auto transformer upto 50 HP capacity And AMF Panel round the clock including Sunday & Holiday at any location in Lucknow Cantt area with in specified time not more than two hours complete all as specified and directed. (Note :- (i) Work requisition as per Annx I duly signed by all concerned kept on record and shall be submitted to GE alongwith RAR. (ii) Spare parts upto cost of Rs. 100.00 shall be included in the unit rate quoted by the bidder. (iii) Any other spare parts shall be measured and paid separately under appropriate items of this BOQ.

Note for all items of this BOQ: - (i) Contractors special attention is invited that due to being water supply Related work will be executed round the clock including Sunday / holiday. Contractor is required to deploy there repairing team / tools etc as and when directed by Engineer-in-Charge through verbal / telephone / WhatsApp’s etc. Contractor is required repair the pump (any type) / starter etc within 72 hours from time of receipt of complain failing which a penalty of Rs 200.00 (two hundred) / hours subjected to maximum of Rs 5000.00 (five thousand) per complain. Engineer-in-Charge is required to maintained documentary evidence of receipt of complain by the contractor. In case any dispute between the contractor & Engineer-in-Charge decision of Accepting Officer will be final & binding.

(ii) Contractor will deploy proper skilled man power for execution of work having ITI with 2 years’ experience or 5 years’ experience for execution of similar type work. Contractor will submit documentary evidence for qualification / experience of the manpower to Engineer-in-Charge.

Shree Kanth Technologies

MTR GROUP & COMPANY

Ajanta Associates