07/ETC-II(P)/ 2025-2026

Amount

SUPPLY

Supply of bolted type tension gun fitting without turnbuckle with all accessories suitable for Panther conductor.

Supply of single tension fitting for Panther conductor

Supply of bolted type single suspenstion fitting without turnbuckle with all accessories suitable for ACSR panther conductor.

U' Bolt of size 16 mm

PG clamp made of Aluminum Alloy fitted with 04 Nos. suitable size of GI Nut & Bolts with washer suitable for Moose to Panther conductor.

PG clamp made of Aluminum Alloy fitted with 04 Nos. suitable size of GI Nut & Bolts with washer suitable for Panther to Panther conductor.

Cable termination clamp (L-type clamp) as per sample

CT Junction Box

PT Junction Box

Disc Insulator 70 KN

33 KV Post Insulator

MS Flat 50*6 mm

MS Round Bar For Earthing

36 KV Termination Kit of Both end for 3Cx300 Sqmm Power cable

Fire Fighting CO2 Type of 9 KG

HDG Nut Bolt with washer size of 16x35

HDG Nut Bolt with washer size of 16x40

HDG Nut Bolt with washer size of 16x45

HDG Nut Bolt with washer size of 16x50

Supply of Bajaj/Syska/CGL/Standard make 150 Watt Edge LED street light.

Shorting, counting and shifting of galvanized structure to loading point and loading its on vehicle at EFU-Naini, Prayagraj.

Carriage of above 6.95 MT structure from EFU Naini, Prayagraj to 132 KV S/S Naini Complex approx. distance 03 km. (vehicle, man, materials provided by contractor at his own cost)

Unloading, shorting member wise and stocking properly galv. structure at the store of 132 KV S/S Naini Complex.

Erection of auxiliary and main structure including shifting material from store to work site including cost of labour & required T&P.

Shifting of 36 KV, 3-Core 300mm2, XLPE Copper Conductor Power Cable from store to work place, laying of above cable in trench from existing transfer Bus to new transfer bus in two length of approx. 100 M. each (one length will remain as spare in trench)

Fixing of 02 no. 150W LED Street light fitting work include laying of 2 core cable from nearest AC cubical source to light fitting with switching box & required. Cable will be provided by department.

Laying & stringing of 33 KV Transfer Bus, between erected CCMs for 33 KV New Bay 12 meter length of ACSR Panther Conductors including hoisting of Disc Insulator Tension String with Tension Fitting alongwith shifting of the conductors, Tension fittings, spacers etc. from stores at the Sub-station to Switchyard. (1 Job per Phase per Section)

Erection of following equipments

(a) 33 KV PT

(b) 33 KV PT Junction Box

(c) 33 KV VCB with structure

(d) 33 KV BSI

(e) 33 KV LSI

(f) 33 KV CT

(g) 33 KV CT Junction Box

(h) 33 KV LA

(i)33KV Tripple feeder control and relay Panel

(j)Meter cubical with 02 no. ABT Energy Meter

(k)DC Distribution Board

Jumpering from 33 KV Main Bus of twin ACSR Moose conductor with 33 KV Feeder's, equipments, 33 KV BSI, CB, CT, PT, LA & LI and jumpering to gantry for going to distribution & also from transfer bus. Connecting termination kit one end of new Transfer bus and anther end of 33 KV Existing transfer bus with the help of ACSR Moose/Panther conductor and suitable clamps/connectors including, cutting, bending, shaping etc. of the Conductor as per Site Requirement. Connector & other hardware fitting provided by department

Laying and termination of required copper control cable through GI pipe (B class standard make) of 2"/1.25" dia including GI -T elbow from CT/PT /Junction box to metering point in metering room (GI Pipe, T, Elbow, etc. and cable will be provided by contractor at his own cost and cable provided by department free of cost).

Laying of control cable secondary side of 33 KV CT/PT to Junciton Box then from CT/PT Junction box to C&R Panel, VCB/BSI/LSI to control relay panel AC & DC Supply to all required equipments to control relay panel work include proper dressing of cable at regular interval of 01 meter with suitable size of tie. (cable provided by department free of cost)

Cable termination at VCB/CT/PT/BSI/LSI Junction Boxes to C&R Panel and CT/PT turrets to CT/PT Junction boxes with proper ferruling & dressing (Ferrule provided by contractor) (a) 2x2.5 mm2 (b) 4x2.5 mm2 (b) 6x2.5 mm2

Earthing of structures and equipments (CT/PT/Isolater Boxes/C&R Panel/Cubical Panel/VCB, LA & lattic type structure) by 50x6 mm size MS Flat & Earthing of new made cable trench by 25x6 mm size MS Flat (MS Flat to be provided by the contractors at his own cost) including cutting, bending, laying approx 800 mm below site the ground including with main earth mat jointing & painting with non corrosive paining at the flat on structure with green paint after 01 coat of red oxide primer and back filling of excavated earth along with raiming and other associated work and also earthing of new trenches of 2.5x6 Sq. mm MS Flat.

Laying of 36/40 mm dia M.S.Round bar 1200 mm below ground level in rocky soil including cutting, bending, straithnening, welding & painting excavation of trench,its back filling & all other associated work to complete the work satisfactorily as per drawing & technical specification excluding the cost of round bar, electricity charges shall be brone by contractor on actual.

Installation of 33 KV Cable Termination kit for 33 KV, 3-Core 300mm2, XLPE Copper Conductor Power Cable. Work includes stretching the cable loop from trench, peeling/ removing the insulation of 3 cores of cable on both side of cables in length suitable for proper installtion of cable box and after providing proper insulation placing the same in the trench. All man, material T&P shall be provided by contractor at his own cost. (01 job for one end per 3-phase).

Supply & Fixing equipment names plate of MS Sheet 16 gauge of size 200x300 mm with hole of S/S in the top centre for fastering & writing name of equipment black colour after painting sheet with 02 coat of red primer & 01 coat Yellow colour.

Supply & Fixing bay name display board of MS Sheet 16 gase size 400x250 mm with the help of MS pipe having inner frame approx. size 2"x1" with welding of two legs of MS angle of 03 feet and writing name of bay black colour after painting sheet with 02 coat of red primer & 01 coat yellow colour both side of display board including digging, grounting, concreating (1:2:4 Ratio), 1.5 feet from ground level & all associated work to installed Bay name display board.

Marc vision infrasolutions pvt. ltd. (BID ID -5247403)

R.S.ASSOCIATE (BID ID -5246257)