CA NO CWE/CHD-56/2019-20 MAINT OF ROOF, TILE, PLUMBING, FALSE CEILING AND MISC B/R WORKS FOR OR, OFFRS, KEY PERSON MD ACCN

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots complete all as specified and directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces , finished even and fair without using extra cement on walls in cement mortar 1:4, in patches (with WPC)complete all as specified and directed. Note :- WPC shall be measured and paid separately.

Rendering 15 mm thick on brick work or concrete surfaces, finished even and smooth without using extra cement on walls in cement mortar 1:6, in patches complete all as specified and as directed.

Rendering 10 mm thick in CM (1:3) on ceiling, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Two coats of exterior grade acrylic emulsion paint over a coat of primer on new wall surfaces including all necessary preperation of new wall surfaces, complete all as specified.

Two coats of acrylic distemper/ distemper oil emulsion (OBD) on new plastered wall surfaces of any description over 2mm thick wall care putty including preperation of surfaces complete all as specified and directed.

Three coats of white wash on new surfaces of ceiling including all necessary preparation complete all as specified and directed.

One coat of white wash on old wall/any surfaces including all necessary preparation complete all as specified and directed.

One coat of white wash on ceiling (old surfaces) including all necessary preparation complete all as specified and directed.

One coat of colour wash including preparation on undecorated wall surfaces complete all as specified and directed.

One coat of cement base paint on old wall surfaces including all necessary preparation complete all as specified and directed.

Two coats of cement base paint on old wall surfaces including all necessary preparation and wetting and curing, complete all as specified and directed.

One coat of acrylic distemper/ distemper oil emulsion (OBD) on old wall/ceiling surfaces including all necessary preparation complete all as specified and directed.

Two coats of acrylic distemper/ distemper oil emulsion (OBD) on old wall/ceiling surfaces including 2mm thick wall care putty after complete removal of existing treatment complete all as specified and directed.

One coat of synthetic enamel paint over old painted wooden or wood based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified and directed.

One coat of synthetic enamel paint over old painted steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed.

One coat of synthetic enamel paint over steel & iron surfaces of any description, not exceeding 10 cm in width or girth, unconnected with other painting or when painted in different tint including preparation of surfaces complete all as specified and directed.

Supply only liquid water proofing compound.

S&F Vitreous China wash basin (white) Flat back, size 550x400 mm including cast iron brackets, PTMT waste cupling and PVC waste pipe complete all as specified and directed.

S&F Vitreous China Squatting pan, 'Orissa pattern, size 580x440 mm white with integral foot rests with and including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, etc fixed in repair complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15 mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore bib taps CP brass,fancy type,long body, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm bore Angle cock chromium plated brass fancy type ,screwed down , high pressure, scrwed both ends for iron pipe complete all as specified and directed.

Cast iron Nahani trap(dia of outlet 75 mm), with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repair Continuous (piano) hinges 30 mm wide, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F 100 mm size Hasp and staple, safety type, aluminium anodised hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair 19mm particle board, medium density, flat pressed single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed stainless steel wire staples complete all as specified and directed.

Cutting chases in stone wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

M&L 15mm bore GI tubes medium grade with all fittings & fixed complete to walls or ceilings or laid in floors complete all as specified and directed.

All as per item No 31 here-in-before but 20mm bore of pipe.

Taking down shutter and refixing the same after easing & minor altearation in sizes area not nexc 1.5 Sqm complete all as specified and directed.

Taking down steel water tubing 15mm to 20 mm with all fittings from walls, ceiling and floors, complete all as specified and directed.

Taking down shutter and refixing the same after easing & minor altearation in sizes area exc. 1.5 Sqm complete all as specified and directed.

Taking down Chowkhats or frames without taking off shutters from the frame n. exc. 1.5 Sqm complete all as specified and directed.

S&F in repairs factory made Box type steel window steel frame 80mmx60mm (peripheral) and 80mmx75mm(intermediate memebrs)made out out of cold rolled 1.25mm thick sheet having steel window/ventilator shutter of MS tabular section of size 50mmx20mmx1.10mm thick fixed with box type hollow tabular section beading for glazed and wire shutter handle of 100mm size made out of Z section 2 Nos MS stove enameled black bolt of size 120mm 02 Nos, 150mm mild steel hook and eyes, complete all as shown in Drg No TD-219/220R/Sh 1/3 to 3/3 of HQ CE Chd zone.

All as per item No 37 here-in-before but without glazing bar.

preparatio of New steel and iron surface of any description, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S&F 25 mm dia curtain rod made of alu. Pipe with decorative lining, coating,including brackets,with complete fittings all as specified and directed.

Framed work such as grills,gratings,etc..with ends of bars shouldered and/or riveted,or forged into spikes,framed guard bar,con-forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Brass chromium plated shower rose 125mm size,with complete fitting complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connection union to pipe overall size 915mm x 460mm, bowl size 410x330 x 160mm complete all as specified and directed.

Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

S&F for anodixed aluminum snap grid of size 605 x 605 mm frame work for false celling with aluminum anodized section size, wall angle 40mm x 25mm x 2mm thick, main /crosstee-section 36.5mm x 25mm x 1.4mm and 23.5mm x 26.4mm x 1.4mm and suspended with 6mm dia GI wire respectively with and including 8mm thick liminated laminated Gypsum board fixd to aluminum snap grid all as per clause 10.38.1 of SSR Part-I and as per manufacturer's instructions complete all as specified and as directed. Note :- Taking down eletric items like fan , tubelight ,LED light ,etc and refixing the same place included in the quoted rates.

Dismantiling timber scantling in fillets ,rail,posts,rafter ,purlins,etc under 40Sq.cm in section complete all as specified and directed.

Disconnecting existing tanks , setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconneecting and refixing in position (Cleaning repairing etc measured separately) exc 250 & n.exc 500 ltr in capacity ccomplete all as specified and directed.

Disconnecting existing tanks , setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconneecting and refixing in position (Cleaning repairing etc measured separately) exc 500 & n.exc 1000 ltr in capacity complete all as specified and directed.

S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 500 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Dismantling water tanks 1000 ltr /500 ltr complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc(exc 250 & nexc 500 ltr) complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc(exc 500 & nexc 1000 ltr) complete all as specified and directed.

S&F in repair Chromium plated brass Toilet paper holder complete all as specified and directed.

S&F in repair Chromium plated brass Jet spray with tube 1.5 m complete all as specified and directed.

S&F in repair Chromium plated brass 2 in 1 health faucet with hook and 1m tube complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedastal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Brass chromium plated Tubler towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

15mm bore Ball brass valves high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair complete all as specified and directed.

Taking down CI soil waste or vent pipe 100mm bore including all fittings like trapes,bends,junctions etc from any situation complete all as per specified and directed.

Taking down CI soil waste or vent pipe 75mm bore including all fittings like trapes,bends,junctions etc from any situation complete all as per specified and directed.

S&F 110mm bore PVC SWR Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F 75mm bore PVC SWR Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair 110mm PVC SWR Bends any radius complete all as specified and directed.

S&F in repair 75mm PVC SWR Bends any radius complete all as specified and directed.

S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F Fe-410-W(Gde E-250)quality B rolled mild steel in roof trusses(Framed)trusses, purlin, crane gantries, rails anfd framing(beam, tee, angle, channel or flat section)including distance pieces, cleats etc. complete all as specified and directed.

Door strip (snake guard strip) complete all as specified and directed.

Standing float valve of china ware cistern as per existing pan in repair complete all as specified and directed.

Providing and fixing anodised aluminium work for door windows, ventilators, casement/sliding shutters and partitions with extruded built up standard tabular and other sections of approval make fixed with rawl plugs and screws or with fixing clips or with expansion hold fastner incl neceesary filling up of gaps at junctions at top bottom & sides with required PVC neoprene belt etc. Aluminium section shall be smooth rust free straight mitred and jointed mechanically where ever required including cleats angles, aluminium snap beading for glazing/panelling, CP brass/stainless steel screw incl providing hinges/pivot and making provision for fixing of fittings where ever required. Note:- panel fillings other than aluminium filling and necessary fittings shall be measured and paid for separately under respective items.

S&F 5.00mm thick polycarbonate glass sheet (unbreakable)corner shelf set(Consiting of three pieces) all as specified and as directed.

Demolitioin of cement conc in ground floors and pavings n.exc 15cms thickness (below or above GL) complete all as specified and directed.

Cement concrete type B0, 1:2:4 (12.5mm graded aggregate) 25 mm thick complete all as specified and directed.

Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) with old size bricks complete all as specified and directed.

Brick work with sub class 'B' bricks half brick thick straight or curved on plan to any radius in half brick walls built in CM(1:4) complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 8-9mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L coloured vitrified tiles scratch and strain resistant 10mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Glazed ceramic coloured,,tiles 450x350x6-7mm thick in vertical surfaces such as skirting,dados and risers to steps over and including 10mm thick bedding/rendering in CM (1:4) complete all as specified and directed.

Black Granite stone ,20 mm thick as in cooking plateform incl rounding or bullnosing the exposed edges over and including 15 mm thick screed in CM 1:3 complete all as specified and directed.

Cutting chases in stone wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm and n. exc. 20cm girth complete all as specified and directed.

Dismanntling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and directed.

S&F 0.63mm galvanised, corrugated mild steel sheeting with two corrugations side lap fixed with coach screws and washers in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed.

S&F Fe 410-W(Gde E 250)quality B rolled mild steel in roof trusses (framed) trussed, purlins, crane gantries, rails and framing (beam, tee, angle, channel or flat sections) including distance pieaces cleats etc complete all as specified and directed.

Preparation & painting Old painted surface of CGI sheeting /surface of any description, Over 10 cm in width or girth with approved roofing paint complete all as specified and directed.

Preparation of new surface of CGI sheeting /surface of any description, Over 10 cm in width or girth and applying two coats of roofing paint over a coat of primer complete all as specified and directed.

Taking down chowkats or frames exc 1.50Sqm but exc. 4.00Sqm complete all as specified and directed.

Taking down shutter of any description exc. 1.5 Sqm complete all as specified and directed.

Solid PVC Door Frame of size 50mm x60mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

Factory made solid panel PVC moulded door shutter 28 to 30 mm thick (style) with 2,4 or 6mm raised panel design with 2mm thick moulded prelam PVC sheet on front face and 2mm prelam PVC sheet on back face and fixing in frame at site as per specification & drawing.

S&F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 125 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Preparation of new wooden surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthatic enamel paint over a coat of pink primer, incl prepration of surface complete all as specified and directed.

M&L 35mm plain framed panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply on both faces. The size of rail and stile as per IS 1003 (Part -I) complete all as specified and directed.

M&L 75 mm thick Cement concrete type D2,1:4:8 (40mm graded aggregate) as in sub base,path,floor, hardstanding complete all as specified and directed.

M&L stone walling built in CM 1:6 of random rubble uncoursed, well bonded, solidly hearted asin retaining walls, abutment and similar work complete all as specified and directed.

All as per item No 101 here-in-before but except stones.

Flush pointing to random rubble, uncoursed or brought up to coursed CM 1:4 complete all as specified and directed.

Demolition of brickwork or stone/boulder masonary, built in lime mortar including quoins arches, pillers etc, but excluding ashlar facings, dressed stone work and precast concrete article built in cement mortar or cement lime mortar complete all as specified and directed.

M&L providing for PCC 1:3:6 type C1 using 20mm aggrgate as in coping ,apex stone complete all as specified and directed.

Cement concrete in surface channels and drains in cement concrete 1:3:6 type C1 using 20 mm graded aggregate complete all as specified and directed.

Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Machine pressed precast conctete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed.

Providing cement concrete Type B1 1:2:4 (20mm graded aggregate) kerbs or mut stops, rounded or chamfered on edges complete all as specified and directed.

S&F Box type steel windows/ventilator with side hund shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or weldedcomplete all as specified and directed.

All as per item No 111 here-in-before but without glazing bar.

S&F Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.

S&F Kitchen Plate Rack stainless steel to accommodate (8 plate) complete all as specified and directed.

S&F Towel rack stainless steel with peg set (06 Nos) all as specified and as directed.

S&F waste pipe 32mm dia flexible for Sink and WHB all as specified and as directed.

S&F in repairs 10 ltr capacity PVC vlaveless syphonic action type flushing cistern low level,white with inlet ball valve,float and handle including brackets complete all as specified and directed.

Taking down aluminium shutters n exc 1.00 sqm and refixing in the same opening after easing, cleating, and all necessary adjustments complete all as specified and directed.

Taking down aluminium shutters exc 1.00 Sqm but n. exc 2.00 sqm and refixing in the same opening after easing, cleating, and all necessary adjustments complete all as specified and directed.

S&F in repair double action floor spring, hydraulically regulated made up of aluminium 1.25mm thick aluminium alloy sheet , foundation box , main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L Brick work with subclass 'B' bricks straight or curved on plan exc 6mm mean radius built in CM 1:4 including septic tanks and soakage wells, manholes, pedestals, culverts etc complete all as specified and directed.

M&L honey comb brick work in one brick thick construction with subclass 'B' bricks straight or curved on plan exc 6mm mean radius built in CM 1:4 including soakage wells complete all as specified and directed.

Demolition and breaking up drain pipe 150mm bore salt glazed stone ware/AC/PVC pipe complete all as specified and directed.

Cement concrete (1:3:6) type C2 using 40mm graded crushed stone aggregate as in bed to drain pipes 150mm bore including packing under and haunching against the sides of pipes after laying and testing complete all as specified and directed.

150mm bore (internal dia) salt glazed stone ware pipes grade A laid in trenches on concrete bed to required slope jointed complete all as specified and directed.

Cutting into existing manholes for connecting new drains of 150 dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate finished smooth and reforming benching as required complete all as specified and directed.

Cutting into existing manholes for removing existing branch drain making good to walling and rendering cutting out branch channel and making good benching for 150mm dia of pipe complete all as specified and directed.

Excavation in trenches n. exc.1.5m wide and n. exc. 1.5m deep and getting out in hard/dense soil complete all as specified.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified.

Removal of excavated soil to a distance n. exc. 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified.

M&L 15mm thick rendering (1:4) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.

Demolitioin of cement conc (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L TMT bars 10mm dia and over cut to length , bent to shape required including , cranking hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200mm thick (horizontal or slopingfinished rough complete all as specified and directed.

M&L for 100mm bore of pipe cast iron sand cast soil, waste and vent pipes in any length with or without ear fixed to wall or in slab complete all as specified and directed.

S&F for 100mm bore of pipe cast iron cowls complete all as specified and directed.

M/S MANI GARG CONTRACTOR