Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.7 LAccepted-AOC 606 80 FEET ROAD 7TH BLOCK 2ND PHASE BANASHANKARI 3RD STAGE BANGALORE 560 085 | BANGALORE | BANGALORE | KARNATAKA | 560085 | L1 | Accepted-AOC Being Lowest Bidder and reasonable | |
| 2 | L2₹50.0 L+₹7.3 L (17.0%)Rejected-AOC 8 6TH CROSS MATHRU SHREE NILAYA OPP MAHARISHI RESIDENCE KAGGADASAPURA CV RAMAN NAGAR BANGALORE 560 093 | BENGALURU URBAN | KARNATAKA | 560093 | L2 | Rejected-AOC Not Being Lowest Bidder | |
| 3 | L3₹54.0 L+₹11.3 L (26.5%)Rejected-AOC NO 3 KEMPANNA ROAD MARUTHI SEVA NAGAR POST BANGALORE 560 033 BANGALORE KARNATAKA | BENGALURU URBAN | KARNATAKA | 560033 | L3 | Rejected-AOC Not Being Lowest Bidder | |
| 4 | Rejected-Technical | - | Rejected-Technical Firm being one below eligible, failed to submit the documents as asked by stipulated period | |
| 5 | Rejected-Technical 18 KUSHAL LAYOUT 1ST CROSS KAGGADASAPURA CV RAMAN NAGAR POST BENGALURU 560093 | BENGALURU | BENGALURU URBAN | KARNATAKA | 560093 | - | Rejected-Technical Firm being one below eligible, failed to submit the documents as asked by stipulated period |
Tender Value
₹44.8 L
EMD Value
₹89,500
Closing Date
24 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R nd D West Bengaluru
GARRISON ENGINEER I R nd D WEST BANGALORE DRDO COMPLEX CV RAMAN NAGAR BANGALORE
REPAIRS/ REHABILTATION ANDPERIODICAL SERVICES TO OTM ACCN AT LRDE, CAIR AND MES PREMISES, UNDER AGE B/R - I RndD (WEST) BENGALURU
2022_MES_541473_1
GE(I)/R ND D/BAN/TOKEN/34 OF 2022-2023 8989/E8
Open Tender
Civil Works
Item Rate
270 days
Bengaluru
Class and Category as per NIT
8 documents required · 8 mandatory
₹500
GE I R nd D West Bengaluru
₹89,500
Yes
12 Nov 2022
27 Aug 2022
30 Sept 2022
29 Aug 2022
24 Sept 2022
12 Sept 2022
29 Aug 2022 - 10 Sept 2022
Amount
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and disposing of debris outside MD land complete all as specified and as directed.
Demolition of cement concrete (un-reinforced) of any description and in any position, and disposing of debris outside MD land complete all as specified and as directed.
Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises and disposing of debris outside MD land complete all as specified and as directed.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water, etc., and disposing of debris outside MD land complete all as specified and as directed.
Uprooting or scrubbing plants / shrubs / flora / fauna on walls, girth not exceeding 100 mm, cutting holes in walls, digging out roots applying sulphuric acid / phenolic acid as per manufacturers instructions to burn out deep grown roots and making good the surface using CM 1:3 (mixed with and including water proofing compound) complete all as specified and as directed.
Cutting of tree branches of girth not less than 10 cm, falling on buildings, roof top (15 m height bldgs), by manual or mechanical method and removing the branches outside MD land as and when the cutting is completed all as specified and as directed.
Cleaning of leaves, dust, caked mud and other foreign material on the roof surfaces (up to six storied Bldgs) and to make the surface good for easy clearing of rain water through rain water pipes including removal of debris outside MD land and making good the surfaces complete all as directed. Note : Quoted rate shall deemed to include cost of scaffolding or ladders etc., required for approaching roof top.
Taking down Chowkats or frames with shutters (without taking off shutters from the frames) area of opening not exceeding 1.50 sq m each all as specified and as directed.
Taking down shutters of any description of area exceeding 1 sq m and not exceeding 2 sq m each complete all as specified and as directed.
Dismantling of aluminium partitions / windows of any size and any description complete all as specified and as directed.
Dismantling structural steel work including doors, gates, but excluding framed truss etc. complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, separating and stacking the serviceable material and disposing the unserviceable material outside MD land complete all as specified and directed.
Taking down wall & ceiling boarding, any description, fixed in any position with framework, cover fillets, hangers, etc., complete all as specified and as directed.
Material and labour for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed.
Supply and fix Floor door stoppers of rubber and aluminium alloy powder coated, 150 mm size, with hard drawn steel spring, including taking down existing stopper complete all as specified and as directed.
Supply and fix Floor door stoppers of rubber and stainless steel, 150 mm size, with hard drawn steel spring, including taking down existing stopper complete all as specified and as directed.
Supply and fix Door closer, aluminium die cast body, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80 kg including taking down old door closer of any type all as specified and as directed.
Supply and fix Aluminium anodized barrel tower bolts of extruded section, 150 mm long including taking down old tower bolts all as specified and as directed.
Supply and fix Aluminium anodized barrel tower bolts of extruded section, 150 mm long all as specified and as directed.
Supply and fix Aluminium alloy, anodized, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long including taking down existing sliding bolts all as specified and as directed.
Supply and fix Aluminium alloy, anodized, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long all as specified and as directed.
Supply and fix 100 mm long Mild steel Butt hinges medium weight cold rolled mild steel by welding to existing frame including taking down old hinges all as specified and as directed.
Supply and fix 100 mm long Mild steel Butt hinges medium weight cold rolled mild steel complete all as specified and as directed.
Supply and fix 150 mm Aluminium extruded alloy anodized handles, fabricated type including taking down old handles all as specified and as directed.
Supply and fix 30 mm thick Factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete including Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, including making good to jambs with cement mortar (1:4) and finished to match with existing surface complete all as specified and as directed.
Supply and fix Factory made flush door shutters, 40 mm thick, solid core construction, with particle board core and plywood face panels, decorative face veneers on both sides surrounded with lipping complete all as specified and as directed.
Supply and fix Factory made flush door shutters, 35 mm thick, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
Supply and fix 150 mm Aluminium anodized handles, cast type all as specified and as directed.
Supply and fixing Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, including shop coat of primer complete all as specified and as directed.
Welding in repairs to steel windows / doors exceeding 2.5 cm but not exceeding 5 cm in length and thickness of metal to be welded not exceeding 6 mm complete all as specified and as directed.
Supply and fix in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed complete all as specified and as directed.
Material and labour for Plain Cement Concrete (1:4:8) type D2, using 40 mm graded stone aggregate as sunken slab filling mass concrete, complete all as specified and as directed.
Supply only liquid based waterproofing compound complete all as specified and as directed.
Material and labour for APP based polymeric membrane minimum weighing 3 kg / sq. m and minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 150 grams / sq m) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 litre/sq m by forced application, complete all as specified and as directed. The complete roof treatment shall be consisting of as under including taking down existing treatment :- (i) Screed bed of 10 mm thick in Cement mortar 1:4, on brick work/concrete surfaces while concrete is green, including mixing water proofing compound. (ii) Applying one coat of bituminous primer conforming to IS-3384 @ 0.3 litre / sq m. (iii) Laying of APP based membrane of specified thickness and weight. (iv) Applying a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/ sq m. (v) Applying two coat of aluminium paint @ 100 ml / sq m in each coat. Note: Supply only water proofing compound will be measured and paid separately.
Preparing the existing APP membrane surface laid over roof and applying hot blown bitumen 85/25 grade @ 1.2 kg/sqm and painting with aluminium paint @ 0.1 litre / sqm complete all as specified and as directed.
Material and labour for false ceiling at any height using integral densified calcium silicate, reinforced with fibre and natural filler false ceiling tiles of size 595 mm x 595 mm of approved texture, design and patterns having NRC (Noise reduction co-efficient) of minimum 0.5 as per IS 8225 : 1987, Light reflectance of minmum 85%, non-combustible as per BS : 476 (Part - 4), fire performane as per BS : 476 (Part 6 & 7), humidity resistance of 100%, thermal conductivity < 0.05 W/m K as per ASTM 518 : 1991, fixed in true horizontal level, suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanised @ 120 grams per square metre on both sides), comprising of main - T runner of size 24 mm x 38 mm of length 3 m, cross - T of size 24 mm x 32 mm of length 600 mm to form grid module of size 600 mm x 600 mm, Grid suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per square metre) i.e., 50 mm long, 8 mm outer diamter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85 mm x 25 mm x 25 mm x 2 mm. Galvanized iron perimiter wall angle of size 24 mm x 24 mm x 0.4 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre, 40 mm long dry wall stainless steel screws complete all as directed by Engineer-in-Charge. Note : Ceiling Tile shall be of 15 mm thick densified tegular edged light weight calcium silicate of Make Aerolite or techno commercial equivalent.
Supply and fix powder Coated aluminium frames and shutters (minimum thickness of powder coating 50 microns) and fabricating for doors, windows, ventilators and fixed partitions with one (or) more rebates including necessary joining cleat, glazing clips, rubber packing, snap bending crews etc complete all as specified and as directed. Note :- i) For payment purpose weight of aluminium section shall be measured and paid, ii) Cost of aluminium mongery. lock, rubber packing, rollers for sliding shall be deemed to include in the quoted rate, iii) Sheet glass and wire gauge shall be measured and paid for separately under respective items.
Supply and fix powder Coated aluminium window and ventilator shutters, side hung / sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified, complete all as specified and as directed. Note :- Sheet glass and wire gauge shall be measured and paid for separately under respective items.
Supply and fix in repairs, 7 mm thick aluminium grill of Deco Grill pattern DG 104, fitted in aluminium windows / ventilators, etc., fitted in and including aluminium channels in openings of windows / ventilators, complete all as specified and as directed.
Supply and fix Steel windows side hung shutters made of 'Z' section, flash butt welding and tenon riveting as per IS 1038-1989, including projecting type hinges, steel handles, steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.
Material and labour for 9 mm thick Pre-laminated particle board, interior grade, pre-laminated both sides with decorative choice lamination & fixed with screws to timber/metal frame work as in cupboard shutters, shelves, partitions, etc., complete all as specified and as directed.
Material and labour, for 40 mm thick Plain Cement Concrete, (1:2:4), type B-1, using 20 mm graded stone aggregate as in floors, finishing the surfaces even and smooth by using extra cement all as specified and as directed.
Material and labour, for 25 mm thick Plain Cement Concrete, (1:2:4), type B-0, using 12.5 mm graded stone aggregate as in sub-base of flooring complete all as specified and as directed.
Material and labour, for 75 mm thick Plain Cement Concrete, (1:3:6), type C1, using 20 mm graded stone aggregates, as in paving/ plinth protection laid in panels including necessary form work, finishing the surfaces of concrete even and smooth without using extra cement complete all as specified and as directed.
Demolition of stone slabs of any thickness and in any position, providing material and labour, for 18 to 20 mm thick Granite work (of any type), table rubbed and mirror polished), in single piece in steps, jambs, pillars, window-cills, cooking platform and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, making hole for gas pipe, edges made half round, laid over and including screed bed or bedding layer of 15 mm thick in CM (1:4), complete all as specified and as directed.
Demolition of stone slabs of any thickness and in any position, providing material and labour, for Flooring with Granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including cement screed 15 mm thick in CM 1:4 complete all as specified as directed.
Demolition of stone slabs of any thickness and in any position, providing material and labour, for Skirting / Dado with Granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including backing coat 10 mm thick in CM 1:4 complete all as specified as directed.
Material and labour, for Glazed ceramic coloured tiles of size 350 mm x 250 mm x 7-8 mm / 450 mm x 350 mm x 7-8 mm laid on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with colour of tiles over and including 10 mm thick backing coat in CM (1:4) complete all as specified and as directed.
Material and labour, for Glazed ceramic coloured tiles of size 300 mm x 200 mm x 7 to 8 mm laid on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with colour of tiles over and including 10 mm thick backing coat in CM (1:4) complete all as specified and as directed.
Material and labour, for flooring with non-skid ceramic coloured tiles, 7 to 8 mm thick, (area of tile exceeding 0.06 sq m and not exceeding 0.11 sq m) laid, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with colour of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.
Material and labour, for flooring with non-skid ceramic coloured tiles (area of tile exceeding 0.11 sq m and not exceeding 0.18 sq m), 7 to 8 mm thick, laid, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with colour of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.
Material and labour, for Flooring with non-skid ceramic coloured tiles (area of tile exceeding 0.18 sq m and not exceeding 0.38 sq m), 7 to 8 mm thick, laid, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with colour of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.
Material and labour, for Flooring with polished Vitrified tiles, Light shade 8-10 mm thick (Square / rectangular), area of each tile exceeding 0.36 but not exceeding 0.42 , set, pointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid over and including provision of cement screed of 15 mm thick in CM 1:4, complete all as specified and as directed.
Material and labour, for polished Vitrified tiles, Light shade 8-10 mm thick (Square / rectangular), area of each tile exceeding 0.36 but not exceeding 0.42 , laid on vertical surfaces such as dado, skirting etc., set, pointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid over and including provision of cement screed of 10 mm thick in CM 1:3, complete all as specified and as directed.
Material and labour, for Flooring with polished Vitrified tiles, Dark shade 10 mm thick (Square / rectangular), area of each tile exceeding 0.36 but not exceeding 0.42 , set, pointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid over and including provision of cement screed of 15 mm thick in CM 1:4, complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins / spring clips etc., complete all as specified and as directed.
Supply and fix Plain Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square exceeding 0.5 sq. m in each pane all as specified and as directed.
Supply and fix Plain Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane all as specified and as directed.
Re-securing glass of any description in existing metal frames, glazed with putty / beads including removing loose / decayed putty / beads, painting / oiling one coat on rebates, grooves, re puttying and painting / oiling puttied surfaces to match existing work all as directed. NOTE:- New length of frame re-puttied shall be measured.
Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed.
Material and labour, for Rendering 15 mm thick on brick or concrete surfaces in cement mortar in CM 1:4 including mixing approved water proofing compound, finishing the surfaces even and smooth without using extra cement all as specified and as directed. NOTE:- Supply only WPC will be measured and paid separately under relevant item of BOQ.
Material and labour, for Rendering 15 mm thick on brick or concrete surfaces in cement mortar in two coats, 5 mm thick in CM 1:4 including mixing approved water proofing compound over 10 mm thick rendering coat in CM 1:6, and finishing the surfaces even and smooth without using extra cement all as specified and as directed. NOTE:- Supply only WPC will be measured and paid separately under relevant item of BOQ.
Material and labour, for Rendering 10 mm thick on brick or concrete surfaces in cement mortar (1:6) and finishing the surfaces even and smooth without using extra cement all as specified and as directed.
Material and labour, for Rendering 5 mm thick on brick or concrete ceiling surfaces in cement mortar (1:3) and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
Providing 1 mm thick Brush bond RFX (two component acrylic polymer modified cementious coating consisting of Brush bond RFX powder and Nito bond BBX acrylic emulsion grey in colour of Make FOSROC) on old exposed concrete surface for bonding new cementious materials to existing cementious surface using stiff brush roller or trowel to obtain desired thickness complete all as per manufacturer's instructions, as specified and as directed.
Material and labour for applying 1 mm thick wall care putty on wall / ceiling surfaces complete all as specified and as directed.
Material and labour for, Preparation of old decorated plastered or un-plastered wall surfaces including booming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls complete all as specified and as directed.
Material and labour for, Preparation of old decorated plastered or un-plastered ceiling surface including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling surfaces complete all as specified and as directed.
Material and labour for, Preparation of old decorated plastered or un-plastered surface including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on wall surfaces complete all as specified and as directed.
Material and labour for, Preparation of old decorated plastered or un-plastered ceiling surfaces including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on ceiling surfaces complete all as specified and as directed.
Material and labour for, Preparation of old decorated plastered or un-plastered surface walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement based paint on wall surfaces complete all as specified and as directed.
Material and labour for, French polishing one coat on old surfaces of any description, width or girth including cleaning and preparing the surface over and including one coat of wood filler complete all as specified and as directed.
Material and labour for, French polishing two or more coats on surfaces of any description, width or girth including cleaning and preparing the surface over and including one coat of wood filler complete all as specified and as directed.
Preparation of new or previously untreated plastered wall surfaces of any description and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.
Material and labour for, Preparation of new or previously untreated plastered wall surfaces of any description and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.
Preparation of new or previously untreated surfaces of brick / stone masonry, concrete, asbestos cement or plastered surfaces any description and applying two coats of plastic emulsion over a coat of plaster primer complete all as specified and as directed.
Material and labour for, Preparation of old plastered wall surfaces of brick / stone masonry, concrete, asbestos cement, plastered surfaces any description and applying a coat of plastic emulsion complete all as specified and directed.
Material & Labour for Preparation of old plastered surfaces, applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gram/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 complete all as specified and as directed.
Material & Labour for Preparation of new or previously untreated plastered surfaces, applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gram/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 over and including priming coat of exterior primer applied @ 0.90 litre/ 10 over new surfaces
Material and labour for, Preparation of old wooden surfaces of any description not other wise described over 10 cm width or girth applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and labour for, Preparation of new or previously untreated wooden surfaces of any description not other wise described over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Material and labour for, Preparation of old steel surfaces of any description not other wise described over 10 cm width or girth applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and labour for, Preparation of new or previously untreated steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.
Material and labour for, Preparation of old wall surfaces by brooming down or using steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, applying texture paint of approved colour and paint over a coat of base coat as per manufacturers instructions complete all as specified and as directed. Note : Texture finish shall be of Make Asian Royale or equivalent approved makes. Rate shall be deemed to include for scaffolding as required.
Material and labour for, Preparation of wall surfaces, writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30 cm high complete all as specified and as directed.
Supply and lay in trenches 20mm CPVC pipes SDR 11 including plain CPVC SDR 11 fittings , all as specified and as directed
Supply and lay in trenches 25mm CPVC pipes SDR 11 including plain CPVC SDR 11 fittings , all as specified and as directed
Taking down unserviceable GI tubing, supply and fixing new 20 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed.
Cleaning and removing all scale and dirt etc from tanks of capacity exceeding 250 Litres but not exceeding 500 Litres and from mouths of circulating pipes etc., complete all as specified and as directed.
Cleaning and removing all scale and dirt etc from tanks of capacity exceeding 500 Litres but not exceeding 1000 Litres and from mouths of circulating pipes etc., complete all as specified and as directed.
Cleaning and removing all scale and dirt etc from tanks of capacity exceeding 1000 Litres but not exceeding 2000 Litres and from mouths of circulating pipes etc., complete all as specified and as directed.
Dismantling of water tanks of 500 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (triple layered) of 500 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
Dismantling of water tanks of 1000 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (triple layered) of 1000 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
Dismantling of water tanks of 2000 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (triple layered) of 2000 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
Supply and fix Bib taps 15 mm dia, fancy type, chromium plated with CP flange all as per Cat No. F280002 of Hindware or equivalent in other makes specified complete after taking down old bib taps all as specified and as directed.
Supply and fix Pillar taps, 15 mm dia, fancy type, chromium plated with CP flange, long shank all as per Cat No. F280001 of Hindware or equivalent in other makes specified here-in-after, after taking down old pillar taps complete all as specified and as directed.
Material and labour for, Swan neck Pillar taps , suitable for fixing to 15 mm bore, cast copper alloy chromium plated, fancy type, of SEIKO make code SF 3010 or equivalent in other makes specified, screwed for iron pipe including taking down existing taps complete all as specified and as directed.
Supply and fix in repairs, Stop valves 15mm bore, fancy type with CP wall flanges, chromium plated, cast copper alloy with crutch or butterfly handle complete all as specified and as directed.
Supply and fix, Health faucet, brass body with 1 metre long SS braided rubber hose pipe with wall hook all as per CERA Model No: F8030301 or equivalent in other makes specified as after taking down old faucet complete all as specified and directed.
Material and labour for, Vitreous china snow white, Counter type wash hand basin of size 550 mm x 430 mm x 195 mm all as per Cat No. C0466 (SP)) of Parry ware or equivalent makes specified including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces after taking down existing WHB complete all as specified and as directed.
Material and labour for, Vitreous china snow white, wash hand basin without pedestal of size 550 mm x 400 mm all as per Cat No. S2040103 of CERA or equivalent makes specified including CI brackets 450 mm long, PVC flexible pipe with both side brass nuts , 750 mm long PVC waste pipe of 32 mm dia, CP waste coupling and grouting with 6 to 8 mm dia GI racket bolt at the back side of WHB or inserting the CI brackets into wall and making good existing surfaces complete all as specified and as directed.
Taking down unserviceable EWC, supply and fixing new Vitreous china snow white colour floor mount type European Water Closet of size 520 x 360 x 390 mm with PVC seat cover and 'P' trap, fixing at a distance of 300 mm from wall with bolt including connection with flushing cistern, seat cover and with outlet pipe complete all as per Model CONVENTIONAL, Cat Part Nos B1510101 & S1050102 of CERA Make or equivalent in other makes complete all as specified and directed.
Taking down old sinks and Supply and fixing Stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen over all size 915 mm x 460 mm with bowl size 405 x 355 x 178 mm all as per Cat No.SSSBSD-52 of Blue Star make or techno commercially equivalent in other makes specified including CP waste coupling of 40 mm dia, cast iron cantilever brackets, 40 mm dia 800 mm long corrugated PVC waste pipe, washers, connecting union etc. complete all as specified and directed.
Supply and fix in repairs, PVC valve less, syphonic action type, white colour flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and jointing with existing flush pipe and making good to the disturbed surfaces complete all as per Model No: CIENA PREMIUM Cat Part No B1010102 of CERA Make or equivalent in other makes all as specified and directed.
Supply and fix, Gun metal, globe or gate valves 15 mm bore with iron wheel head screwed both ends for iron pipe and including taking down old gate valve complete all as specified and as directed.
Supply and fix, Gun metal, globe or gate valves 20 mm bore with iron wheel head screwed both ends for iron pipe and including taking down old gate valve complete all as specified and as directed.
Supply and fix, Ball valves of 20 mm dia , (minimum weight 210 grams), high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including taking down old ball valve complete all as specified and as directed.
Supply and fix, Ball valves of 25 mm dia , (minimum weight 455 grams) , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including taking down old ball valve complete all as specified and as directed .
Supply and fix, PTMT waste coupling of 32 mm dia (minimum weight 45 grams), half or full threaded including taking down old coupling of any description complete all as specified and as directed.
Supply and fix, PTMT waste coupling of 40 mm dia (minimum weight 60 grams), half or full threaded including taking down old coupling of any description complete all as specified and as directed.
Supply and fix, PTMT grating doom 100 mm dia (with or without waste hole, minimum weight of 25 grams) after taking down old grating complete all as specified and as directed.
Supply and fix, PVC connecting pipe 600 mm long 15 mm dia both ends having brass coupling nut and PVC washer after taking down old connecting pipe complete all as specified and as directed.
Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Supply and fix, UPVC (SWR) pipes 75 mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.
All as per Serial Item No 116 here-in-above, but of 110 mm dia SWR Pipe.
All as per Serial Item No 116 here-in-above, but of 160 mm dia SWR Pipe.
All as per Serial Item No 116 here-in-above, but of 200 mm dia SWR Pipe.
Supply and fix in repairs, PVC (SWR) bends any radius 75 mm dia of bore fixed in pipes, complete all as specified and as directed.
Supply and fix in repairs, PVC (SWR) branch piece single equal of bore 75 mm dia, fixed in pipes, complete all as specified and as directed.
Supply and fix in repairs, PVC (SWR) bends any radius 110 mm dia of bore, fixed in pipes, complete all as specified and as directed.
Supply and fix in repairs, PVC (SWR) bends any radius 160 mm dia of bore, fixed in pipes, complete all as specified and as directed.
Supply and fix in repairs, PVC (SWR) bends any radius 200 mm dia of bore, fixed in pipes, complete all as specified and as directed.
Supply and fix, PVC (SWR) branch piece single equal of bore 110 mm dia, fixed in pipes complete all as specified and as directed.
Supply and fix, PVC (SWR) vent cowl of bore 110 mm dia, including taking down old PVC vent cowl all as specified and as directed.
Supply and fix in repairs corrugated waste pipe 32 mm dia, 800 mm long as per Cat Part No 327 of Prayag or techno commercial equivalent, for wash hand basin complete all as specified and directed.
Supply and fix, PVC multi floor trap 75 mm dia outlet with grating including dismantling the damaged trap all as specified and as directed.
Taking down old water tank cover and Supply and fixing Polyethylene water storage tank covers circular or any other type with hinges suitable for up to 1000 Litres capacity tanks all as specified and as directed.
Supply and fix, Venetian blinds, vertical type, 100 mm wide with polyester fabric of approved colour and pattern with aluminium fittings, and top rail and nylon buttons / loops etc., fixed cuttings and alteration if necessary, including dismantling the old unserviceable venetian blinds complete all as specified and as directed. (Price shall not be less than ` 125/- per sq ft)
Supply and fix in repairs, stainless steel tubes, mirror polished, fixed as hand rails, ornamental fencing, chains, special articles etc.,(Grade SL-304) including necessary welding, grinding to smooth finish, and fixing to walls or floors with stainless steel plates with nuts, bolts, etc., complete all as specified and as directed.
Supply and fix in repairs vitreous China urinals, full stall type, white, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.
All as per Serial Item No 132 here-in-above, but of half stall type.
Supply and fix in repairs vitreous china urinal partition white of size 310x700 mm terminating about 40cm above floor line complete all as specified and as directed.
Supply and fix urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed.
Complete removal of existing treatment on wall surfaces all as directed.
ARCHANA CONSTRUCTION CO
M AND V ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .