PROVISION OF ROAD SIDE FURNITURE AT CGSD TONDIARPET AND CGRA MEENABAKKAM CHENNAI UNDER GE(I) CG CHENNAI

Amount

Excavating in post holes each not exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25 CM in soft/loose soil including removal of soil to a distance not exceeding 50m and making good the surface complete all as specified and as directed.

Material and labour for Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete including necessary formwork complete all as specified and as directed.

Supply and fixing of Stainless Steel frame work all aorund the the road sign board inclduing vertical post and all other necessary section and sheets all as specified and as directed By Engg-in-charege.

Supply and fixing of Reflection boards (Road Sign Board) made of Aluminium Composite Panel of 3mm thick sheet including reflective sheet with marking of letter and dimension of sheet and letter are as per IRC 67-2001 and including fixing of aluminium Strip and suitable UV resistance adhesive all around the Stainless steel frame work complete all as specified and as directed by Engineer-in-charge. Note: Stainless steel frame work items will be measured and paid separately.

S & F Safety convex Mirror of size of dia 32 Inches/80 cms Polycarbonate Traffic Mirror Unbreakable Round Wide-Angle Driveway Front Convex Mirror, With Adjustable Brackets and Nuts Bolts For Installation including fixing on SS Pipe complete all as specified and as directed by Engg-in-charge. Note: Stainless steel Pipe will be measured and paid separately.

Material and labour for manufacturing, supplying and fixing of retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom endand including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per specification and direction of Engineer-in-charge.

Manufacturing, supplying and fixing retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per specification and direction of Engineer-in-charge.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. Note:The unit rate quoted by the tenderer shall be inclusive of appropriate epoxy adhesive applied on the road surface for fixing eye cat Make: 3M/Dark eye/Green lite

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. Note:The unit rate quoted by the tenderer shall be inclusive of appropriate epoxy adhesive applied on the road surface for fixing eye cat Make: 3M/Dark eye/Green lite

Material and labour for road marking strips, lines ,dashes arrows, centre lines/edge lines/Zebra crossing avg of 2.5 mm thick(reflective type) on existing surfaces of road/pavements and the likeincluding preparing and cleaning the existing road surface with coir/wire brushes etc exceeding 10 cm width/girth with hot thermo plastic road paint of white or golden yellow with glass beads @ 5 kg/Sqm by fully automatic paint applicator machine ,fitted with profile shoe,dispenser,propane tank heaters and profile shoe heater etc driven by the skilled opearator on road surface complete all as per MORTH specifications complete all as specified and as directed.

Supply and Fixing of speed bumps with help of suitable pins and adhension having 50mm hump (dimension of product 55 cm (length) 34 cm (width) x32 cm(width) with yellow and black reflector and weight of each block is approx 13 kg .Make: Ladwa Item Part Number LSI RHP 50mm_3 complete all as specified and as directed by Engg-in-charge.

Supply & fix of Vortex road barrier made form high impact resistance polymer UV stabiszed for non fading color . of size 500mm high and 1.15mtr length having width of 600mm and sustain Water ballast of 22 ltr complete all as specified and as directed By Engg-in-charge.

SREE VENKATESWARAS CONSTRUCTIONS

V MEENAL AND CO

lakshmibuilders

S KUMARAN

M/s.Sai Agency

VIJAYALAKSHMI ENTERPRISES

Gaurav Enterprises

Banyan Engineers and Contractors

kvs constructions

SRI LAKSHMI ASSOCIATES

Sri Lakshmi and Company