Supplying and Fixing of Decorative Heritage Bollards Post Top Luminaires and Street Lights around Vanasthali Forest Rest House Chidiyatapu

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm Nominal size) in foundation of pump, DG set etc including formwork etc as required.

Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

Filling available excavated earth (excluding rock) in trenches, Sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 metres.

Supplying of FRLS or higher PVC insulated and sheathed un armoured industrial flexible cable with Copper conductor 660-1100V grade confirming to IS 694-2010 size 3 Core x 2.5 Sqmm

Supplying of outdoor type LT control Panel board fabricated from 1.6/2mm thick CRCA sheet steel dust and weather proof with hinged type front doors opening and painting with internal wiring of suitable size FRLS copper cable with the following provision. 1. Main Incomer FP MCCB, 100 Amps, 415 V, 25 KA with thermal setting range of suitable breaking capacity,....01 Nos. 2. Busbar for RYBN of 100 amps Capacity with sleeves and provision for tapping ... 01 set 3. SP MCCB 5-32 amps C curve , 6 Nos. in each phase incoming tapping from Bus bar.... 03 sets 4. 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 10 A "C" curve, SP, MCB, in sheet steel enclosure... 03 Nos

Supplying of decorative heritage type Victoria model Bollard luminaires comprising 900 mm-1100 mm height resin moulded decorative pole internal GI reinforcement complete decorative top mounted Victorian style die case aluminium/resin lanern l luminaires in black antique weatherproof powder coated finish, UV stabilized diffuser LED gear assembly or E27 holder with bulbs suitable for coastal outdoor installation complete. (Fasteners SS 316 preferred, Protection IP 65 , coating thickness 80 micron minimum ) (before supplying of luminaries model and all dimensions to be approved by the department )

Providing and fixing MS base plate with Hot dip galvanizing with 4 Nos. M12 anchor bolts (150 mm long)including nits, washers, threading .drilling holes placing foundation alignment as required for the bollard light installation

Supplying of decorative heritage type Victoria model Post top luminaires comprising 2400 mm height resin moulded decorative pole internal GI reinforcement complete with dual downward facing Victorian style die case aluminium/resin lantern luminaires in black antique weatherproof powder coated finish, UV stabilized diffuser LED gear assembly or E27 holder with bulbs suitable for coastal outdoor installation complete. (Fasteners SS 316 preferred, Protection IP 65 , coating thickness 80 micron minimum ) (before supplying of luminaries model and all dimensions to be approved by the department )