SPECIAL REPAIR TO EXTERNAL ELECTRIC SUPPLY OF UPPER AREA AT MIL STN KALKA UNDER GE JUTOGH

Amount

Excavation in trenches not exceeding 1.5m wide and 1.5 m depth for laying cable etc and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading, levelling, well ramming in layers not exc 25cm thick complete all as specified and directed

Removing excavated materials (soils) to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and as directed.

M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggreegate as in foundation and mass concrete etc. complete all as specified and directed.

Dismantling of ACSR conductor, any size and deposited in MES store yard, complete all as specified and directed.

Dismantling cross-arms of M.S. channel or angle sections etc. any size and deposited in MES store yard,complete all as specified and directed.

Dismantling insulators any type, any size, type and deposited in MES store yard, complete all as specified and directed.

Supply, Laying, connecting including testing XLPE armoured cable underground insulated and over all sheathed with aluminium conductor heavy duty 1100 volts grade 150Sqmm 3.5 core incl brass compression cable glained, terminal lugs, laid in trenches, floors, ducts passing through pipe for road crossing etc complete all as specified and directed.

Supply, Laying, connecting including testing XLPE armoured cable underground insulated and over all sheathed with aluminium conductor heavy duty 1100 volts grade 16 Sqmm 4 core incl brass compression cable glained, terminal lugs, laid in trenches, floors, ducts passing through pipe for road crossing etc complete all as specified and directed.

Supply and laying well brunt brick sub class ‘B’ bricks for protection to underground cable laid dry and lengthwise perpendicular to the axis of the cable, flat adjoining each other complete all as specified and directed.

Supply & spreading dry clean river bed sand filling in trenches for cushioning of underground cable with layer of sand 8cm thick before laying and 15cm thick after laying of cable complete all as specified and directed. Note: Punned thickness of 18cm shall be measured and paid in lieu of 23cm spread thickness.

Supply and laying galvanised steel tubing 40mm bore, light grade with all fittings laid in trenches, fixing on poles, walls, under floor, road, laying on surface for cable protection with and including all accessories as per site requirements complete all as specified and directed.

Supply and laying galvanised steel tubing 50mm bore, light grade with all fittings laid in trenches, fixing on poles, walls, under floor, road, laying on surface for cable protection with and including all accessories as per site requirements complete all as specified and directed.

S&F KIOSK box weather proof made out of PVC including made out of one piece mounted SMC base and door pole mounted hinged door size 333 x 233 x 200mm out side and 300 x 200 x 105mm inside dimension comprising of aluminum bus bar 4 strips for 3 phase and neutral 63 Amp and 10 Amp MCB for controlling the street light fitting including FI clamps 30 x 4 mm with necessary MS nuts bolts and washer including embossing/painting of Danger notice of size not less than 10 cm x 7.5 cm with letters, figures and conventional skull and bones in signal red colour on front face of KIOSK box body complete all as directed. Make : Sintex cat pat no GS JB 3020 or equivalent in Finolex/ Universal Switch Gear/ Hensal

S&F of Double Door busbar chamber Box of Capacity 400 Amps (Copper Busbar) for three phase and one neutral, duly covered with PVC colour coded sleeves, mounted on porcelain insulators, 415 Volts, 50 Hz, AC supply with Digital Amp and Volt Meter and 250 Amps 4 Pole MCCB as incommer, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, using galvanised iron strip 32×6mm with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 40 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point, including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed.

M/s Friends Engineering Works

RAVI KUMAR

The Rahul Vig

SHARMA ELECTRICAL ENGINEERS

KIRTI ELECTRICALS

M/s APEX ENTERPRISES

M/S Sonu Traders