PROVISION OF GUARD ROOM WITH TOILET FACILITY NEAR GSFR SEA FRONT AND HT ELECTRICAL WORKS INSTALLATIONS UNDER GE I GOS

Amount

Surface excavation n.exc 30 cm deep and getting out in Soft/loose soil.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in Soft/loose soil.

M & L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified.

M&L for RCC, M-30 Design Mix (using 20mm graded aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed

Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

M&L for RCC, M-30 Design Mix (using 20mm graded aggregate) as in Columns,pillars,piers,posts and struts etc complete all as specified and directed.

Formwork to Square,rectangular or polygonal rough surface of concrete of sides of pillars, posts, struts, piers, columns and stanchions

M&L for RCC, M-30 Design Mix (using 20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M&L for RCC, M-30 Design Mix (using 20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L for RCC, M-30 Design Mix Concrete (using 20mm graded aggregate) as in Chajjas

Formwork to flat surfaces of chullah hoods, chajjas, troughs and similar items in cluding edges for rough finished surfaces of concrete

M&L for Moorum / Red bajri filling in floors or pavings, laid in layers n.exc15 cm thick spread levelled and rammed incl watering etcall as specified & directed.

Returning, filling in of soft/loose soil including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing surplus excavated earth (soil) to a distance n. exc 50 m & Depositing where directed at a level n. exc 1.5 m above the starting point.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S&F Mild steel TMT bars 8mm dia and over, cut to length, spacers and binders and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L brick work with fly ash bricks, Straight or curved onplan exc 6m mean radius,built in 1:6 in cement mortar all as Specified and Directed

M&L Brick work with Fly Ash bricks bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall.

M&L for rendering 15mm thick in CM 1:6 on brick or concrete surface, finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finishing even and smooth without using extra cement but using waqter proofing compound complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling finishing even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound of approved make.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete.

M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete.

M&L for Preparation of newly plastered surfaces of wall and applying 2 coat of Exterior emulsion weather proof paint over a one coat of primer complete all as specified and directed.

M&L three coats of white wash on new plastered ceiling surface including preparation of surfaces.

M&L Hard core of gauge n.exc 63 mm, deposited, spread, levelled in layers not exc 15 cm thick, watered and well rammed to a true surface.

M & L Cement concrete type D-2, 1:4:8 using 40 mm graded crushed stone aggreates 100 mm thick as in flooring finished even and fair complete all as specified and directed.

M & L 50 mm thick Cement concrete type B-1, 1:2:4 using 20 mm graded crushed stone aggreates as in flooring finished even and fair complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6, type C-1 using 20 mm graded stone aggregate as in plinth protection, surfaces finished even and smooth with out using extra cement all as specified.(Note- Joint 12 mm wide to the full depth of pcc shall be provided at every 3 metres and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. cost of this provision shall be deemed to be included in the quated rate for concrete in plinth protection

M&L for Non Skid ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 15mm thick screed bed in CM 1 :6 complete all as specified and directed.

S&F glazed ceramic colored tiles 300x450X 7mm thick coloured on vertical surface such as dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tile including rendering 10 mm thick screed bed in CM 1:4 to recieve tile complete all as specified and directed.

S&F 10 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required.

S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed

S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as per specifications and shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed

M&L butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 for 100 mm long complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised of 150 mm size complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S & F vitreous china wash down water closet pan (pedestal pattern), white, incl 'P' or 'S' trap and plastic water closet seat cover, black, closed pattern with flat bottom and cover & MS chromium plated or aluminised hinging device, complete all as directed by Engr-in-Chrg

S&F PVC low level flushing cistern (white) 10 Ltrs capacity syphonic action type with internal fitting, push button operated type with and including bracket, PVC flush pipe etc complete.

S/F in repair health faucet with flex pipe and hand shover ,the length of hose 1.50 mtr fitted to the tap.complete all as specified

S & F in repairs, vitreous china wash basin, white, flat back, size 550x400mm with brackets, inc. cutting for & pinning in ends of brackets, inc. waste fitting, PTMT 32mm dia and pillar taps of PTMT 15mm dia complete.

S&F bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube/CPVC pipe all as specified and directed.

S&F in repair 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts .

S&F in repair 15 mm fancy type stop valve/angle valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed by Engineer-in-Charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete..

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed.

S&F 25 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20mm dia GI/PPR pipe complete all as specified

S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complet all as specified

S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complet all as specified

S & F 25 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complet all as specified

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete.

S&F CP brass towel rail `D’ type 60Cm long fixed to wall all as spd and directed by Engr-in-Charge

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like 15mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

S&F 75mm PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S/F PVC(SWR) 75mm bore pipes single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls complete all as specified and directed

S/F PVC(SWR) 110mm bore pipes single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls complete all as specified and directed

S&F PVC (SWR) bends any radius of 75 mm bore with out access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 100 mm bore complete all as specified and directed.

S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall pipe complete all as specified and directed.

M & L for water proofing treatment for roof slabs including crumple joints by applying bitumen primer @ 0.3 ltr/sqm then applying bot blown 85/25 @ 1.20kg/sqm and laying APP modified bituminous 3mm thick with non oven polyester core water proofing membrane laid and bonded to the sub-strata by heat process, over lap shall be sealed by flame torch application not less than 3.2kg/sqm with over lap of 100mm and end lap of 150 mm and APP membrane shall be covered with bituminous based aluminium paint @0.2kg/sqm on top complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in foundation/mass concrete, filling etc, complete all as specified and directed.

M&L 150mm internal dia, SGSW pipe laid in trenches in any length, jointed as specified complete all as specified and directed..

M&L for PCC 1:4:8 Type D-2, (using 40 mm graded stone aggregate) as in bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipe with concrete after they are laid and tested complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (using 40mm graded stone agg) as in surface channel benching etc laid to shapw and slop including all formwork etc. complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) as in coping weathering slightly rounded or chamferred angles and throating use of formwork straight or curved complete all as specified and shown on drgs.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms moulds, mitered, stopped ends etc omplete all as specified and directed..

M&L for 15mm thick rendering on brick work in cement mortar 1:4 using water proofing compound @ 3% by wt of cement incl finishing the surface even and smooth w/o using extra cement.

M & L precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone agg as in manhole/drain cover and the like set in CM 1:4 all as specified

Supply, installation and testing of maintenance free Chemical earthing tripod earthing electrode Complete with 3 numbers of 17mm, 250 micron, 3 mtr long copper rod buried directly in ground earth pit not less than 5.0 M deep below normal ground level and copper rod connected to copper single core (Multistranded with proper lugs and nuts, bolts and washers) high insulated of size 70 sqmm by brazing only, earth strip protected with light grade GI Pipe 80 mm dia mm bore from copper rod and upto and including the earth test point made of gunmetal Phosporous bronze of size 75x75x25 mm. The earth pit filled with 27 Kgs of Curec+ and 50 Kgs of Curecon chemicals and removal of the excavated soil and depositing at the place where directed HDPE earth pit or PCC Pit in PCC ( 1:3:6 ) type C1 using 20 mm graded stone aggregate , RCC M ) 40 mm thick in RCC ( 1:2:4 ) type B 1 using 20 mm grade aggregate reinforced with 8mm dia TMT bars @ 7.5 mm c/c both ways including MS angle iron frame of 40 X40X 3 mm etc incl testing all as directed and specified. (Make: Techno Power earthing mpdel No.Model o.TPB803 or equivallent) Note:-1. Chemical (maintenance free) earthig work carried by OEM only. 2 Earthing conductor copper cable from earth plate to equipment/ESE system upto 7.5 m length deemed to be included in the rate quoted by the contractor and beyond 7.5 m will be measured and paid under the respective item of the schedule. 3.cost of chemical ,excavation,returining and filling,earthing work required based on the nature of earth pit for satisfactory completion of job deemed to be inclusive in the unit rate. 4. Necessary insulators and suitable nuts,bolts and washers as per site requirement complete all as directed. 5.Necessary Earth pit as per IS is deemed to be included in quoated rate only. 6.Earthing test point for each chemical earth pit for testing and maintenance. 7 The make shall be of manufactures as listed in perticular specification here-in-after.8.The necessary connected accessories and hardwares as per site requirement complete all as directed.9.HDPE Earth pit chamber cover 5 to 6 ton capacity complete all as directed.10. Making of Earth pit number proper letters writing on the earth pit complete as directed.

Supply and fixing, commissioning and testing of paratonex sira 60 turkey lightning arrester lightning protection system based on proactive early streamer emission (ESE) terminal. Techonology confirming to NFC 17-102-2011 Sept and UNE 21186 Standards.Non electronic base digital ground device upto 200KA connections shall emit electromagnetic impulse in the form of a streamer into the air micronsecond earlier than Naturally device confirming to NFC 17-102 Standards lightning impulse current 10/350 us in 300 KA tested stainless steel material (304L) suitable for corrosive environmental radius 107 mtr in level 4 protection(standard protection advanced triggering delta T 60 us ESE type lightning arrester with non electric early streamer emission standardized according to norms UNE 21.186 and NFC 17.102 duly tested and certified & METU Turkey having coverage area of 107 Mtr (Level 4) having lightning charge capacity 300 KA with triggering tme of 60 micro seconds early warning time inflow comes with 20 years warranty and including removing old unserviceable items complete all as specified and directed. Make:- Techno Power ( Model Paratonex Sira 60) .Note:-1. Paratonex sira 60 system work carried by OEM only. 2. The make shall be of manufactures as listed in perticular specification here-in-after

Supply, Installation,commissioning and testing of lightning strike counter (LSC),Lightning flash counter working electro mechanically without any power supply not resttable type with the minium sensitivity of 200KA analogue display model electromechanical display (non resettable ) tested as per IEC 60060-2 degree of protection IP-65 IEC-529 Enclosure material plastic operation temperature 20-85 strike analogue display counter and incl providing copper test link box-01 per earthing and including removing old unserviceable items complete all as specified and directed. (Make: Techno Power ,model :-Paratonex) Note:-1. LSC system work carried by OEM only. 2. The make shall be of manufactures as listed in perticular specification here-in-after

Supply, errect, installation of octagonal GI high mast 5 mtr length pole,with flange at bottom 100 mm dia and top 80 mm dia and suitable fixing arrangements for mounting ESE Lightning Arrester with ESE high grade insulators, anticorrosive with solar LED light indicator with adaptor and connected works.Providing anchorage steel wire rope 5 mm dia for four sides with nuts,bolts and washers and necessary fixing arrangements and including providing RCC block of size 0.75mtr X 0.75 mtr, and incl providing grouting with bolts and nuts for bottom flange plate arrangemets of octagnal pole buttom plate and necessary hardwares and including removing old unserviceable items complete all as specified and directed. Note:-1. GI octagonal High mast poles and connected materials installed by OEM only. 2. The make shall be of manufactures as listed in perticular specification here-in-after.

Supply and fixing down conductor 70 sqmm, single core, heavy duty insulated copper conductor and including providing suitable DMC insulators suitablefor outdoor type.One DMC insulator used for one metre copper conductor cable fixed on wall/roop etc and including nuts,bolts and washers. Complete down copper conductor cable through HDPE pipe laying from ESE lightning strike terminal to chemical earthing test point complete all as specified and directed.Make of copper cable:- Havells or eqvivalent in Polycab/Finolex/RR kable.

Material and labour for point wiring and including providing distribution box to switch board circuit wire complete with 1.5 sqmm, PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990(as amended) unsheathed, multistranded, single core, copper conductor cable 1100 volts grade using approved colour coding drawn through and including PVC concealed conduit 20/25 mm dia medium grade (MMS) and incliding all accessories such as bend,tee,elbows,reducers,bell mouth tube ends,short pieces & junction boxes with PVC covers etc in walls / roofs / floors / ceiling etc and including cutting, chasing work at any height with flush mounting GI sunken boxes having top,bottom,side/back side knockout for conduit entry from any direction made out of 1.60mm thick, 60mm deep for housing modular switches,sockets,fan regulators, Indicators,blank plate etc and incl Providing modular white cover plate with inner frame suitable as per switch modules and including PVC insulated multistranded copper conductor 1.5 sqmm FRLSH type unsheathed (Green colour),single core cable as earth wire connecting to common earth dolly for further connection to ceiling rose and earth terminal and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed for One light point controlled by one 10amps switch, one way. (Note:- All necessary accessories such as modular box,top cover plate,inner frame, blank plate,GI sunken boxes,screws,washers and all modular electrical fixtures are used same make/brand only)

All as per item no. 86 One fan point controlled by one switch 10 amps, and one regulator.

All as per item no. 86 One exhaust fan point controlled by one switch 10 amps,one way

All as per item no. 86 One 5 pin 6 amps socket point controlled by one 10 amps switch on independent board .

All as per item no. 86 One 5 pin 10 amps socket point controlled by one 10 amps switch on same board .

All as per item no. 86 One bell/buzzer point controlled by one bell push.

All as per item no. 86 One light point controlled by two 2 way switches.

All as per item No.91 & 92 above,but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.

All as per item no. 93 One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on same board.

Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, with small indicator ISI Marked complete all as specified and directed.

Supply & fixing modular type switch 10 Amps ,2way,single pole,1 module,240V,AC, with small indicator ISI Marked complete all as specified and directed.

Supply & fixing modular type bell push 10 Amps,1 module, single pole, 240 volts,AC, with embosing bell simble & indicator, ISI Marked complete all as specified and directed.

Supply & fixing modular type switch 16/20 Amps, single pole,1way,1or 2 module,240V,with small indicator,AC, ISI Marked complete all as specified and directed.

Supply & fixing modular type socket shuttered type 10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.

Supply & fixing modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed

Supply & fixing modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 1 to 8 steps, ISI Marked complete all as specified and directed.

Supply & fixing red color lighting indication lamp switch, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed.

Supply & fix angle lamp holder latest model, insulated PVC out side body and brass inside holder with back plate for batten fittings/bulbs complete all as specified and directed.

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed

Supply & fixing LED decorative box type 20 watt 4 feet fitting bright linea warm lighting, high quality materials and designed end caps,extruded aluminium housing enhances safety,high quality PC diffuser, reliable and robust housing structure ,maximize the endurance over the life time slim integrated design , easy to install, efficency 125 lm/w and including providing coloured end caps, pre-wired, and PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose complete all as specified and directed. Make :- Crompton/Havells/Philips

Supply & fix 20 watt LED light fitting pride essential bright linea white lighting, high quality materials and slim intergrated design,extruded aluminium housing enhances safety, PC diffuser, reliable and robust housing structure ,maximize the endurance over the life time, easy to install, efficency 100 lm/w and including providing coloured end caps, pre-wired, and PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose terminal complete all as specified and directed. Make :- Havells ordering code.LHEXAWP7IN1W020 or equivalent make in Crompton/Philips

Supply and fixing 20 watt LED batten nicolaus glamtube integrated design, easy to install,efficency,125 lm/w,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal complete all as specified and directed.Make :- Havells ordering code.LHEWAJPGPV1B020 or equivalent make in Crompton/Philips

Supply and fixing 36 watts LED supernova light fitting high wattage complete LED lighting with high lumen output,environmental friendly,energy efficient, integrated design, easy to install,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal complete all as specified and directed.Make :- Havells ordering code.LHEWAJPGPV1C036 or equivalent make in Crompton/Philips

Supply and fixing LED 20 watt,6500K, Pride plus inverter batten,decorative type light fitting white lighting, with square profile and polycarbonate channel,lithium lon battery with charging time 8 hours to 10 hours and back up time upto 4 hours high quality materials and design,extruded aluminium housing enhances safety,high quality PC diffuser, easy to install, efficency 125 lm/w and including providing pre-wired, and PVC/Wooden round or square blocks -02 Nos and connected with LED fitting to ceiling rose complete all as specified and directed. Make :-Havells Cat No. LHEXACP7FN1W020 or equivalent make in Crompton/Philips

Supply and fix in repair recess mounting 2'x2' LED 40 Watt light fitting slimmest 9 mm thin in class LED ceiling panel with best in class aesthetick white powder coated frame blended seamlessly with ceiling layout suitable for 600X600mm mudular ceiling grid and also can be suspended with provided kit and including connecting up with ceiling rose to fitting and including removing old unserviceable item complete all as specified and directed complete all as specified and directed. Make :-Crompton/Havells/Philips

Supply and fixed in repairs LED bldg secruity light fitting of capacity 40 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing complete all as specified and directed.Make:- Crompton cat ref No.LSTS-40-CDL-M or equivalent make in Havells / Philips as approved

S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired of luminaires including LED light driver and connected with LED fitting to ceiling rose terminal complete all as specified and directed. Make :-Havells Cat No. LHFHDPE1TN1K020 or equivalent make in Crompton/Philips

Supply and fixed in repairs LED floof light light fitting of capacity 100 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing complete all as specified and directed.Make:-Havells Cat NO.LHEECNP7PB7J100 or equivalent in approved make

M & L for sub main wiring complete with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4.0 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and complete all as specified and directed. Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4.0 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Supply & fix in repairs sheet metal enclosure with DD 415 volts AC,TPN,DB, 4way, flush mounting with 100amps copper busbar, 2 neutral/earth bar and MCB incomer,MCB TPN/FP, and MCB SP as outgoing and complete for IP 43 DBs protection and complete all as specified and as directed. Make: Havells/Legrand/Hager or equivalent as approved.

Supply & fixing and sheet metal enclosure, with acrylic door type, double door, 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoing for IP 43& IP54 DBs protection and complete all as specified and as directed. Make:-Legrand Cat No.5076 21 8 way or equivalent make in ABB/Havells

Supply and fix suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts suitable for AC's/Geysers complete all as specified and directed.Make:- Legrand / Hager/ Havells or as equivalent approved make

Supply & fix MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply & fix and MCB TPN 40-63 Amps 10 KA,"C" series,AC,440Volts,50Hz, ISI marked and complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply and fixing 230 V, 1200mm sweep brushless direct current smart and decorative type ceiling fan complete with three blades, down rods, smart electronic regulator, smart remote control operating unit,LED down lights,metalic finish, dust resistant and connected accessories, . Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current copper winding motor, colour as per requirement at site incl writing MES No on ceiling fan with synthetic enamel paint complete all as specified and directed. Make:-Atomberg ( Renesa ) or equivalent in Havells/Orient as approved make

Supply and fix new exhaust fan, steel /PVC body AC single phase.230Volts of size 300 mm sweep with blades and including providing insect protection net frame , with louvers and frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Atomberg/Havells/Crompton or as approved make

Supply anf fixing exhaust fan made of sturd engineering plastic PVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 250 mm and including providing insect protection PVC net frame , with louvers with frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Atomberg/Havells/Crompton or as approved make

Supply and fix new electric water heater, storage type steel body/plastic body with copper inner tank and heating element upto 2 KW capacity 25 litres, BEE 5 star rated complete with all accessories such as safety valve,thermostat, NRV, Hot water and Cold water heavy duty connection pipes-02 Nos,holefasterns-04 Nos and necessary accessories as per site requirement etc.complete all as specified and directed.Make:- Havells/Crompton/Racold/Venus

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.

Supply and fix GI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed.

Supply, laying & testing PVC insulated armoured, heavy duty electric cable with stranded aluminium conductor,1100 volts of cross sectional area 25 sqmm,4 core including testing complete all as specified and directed.Make:-Havells/polycab//Finolex

Supply and laying bricks burnt clay bricks sub class 'B' for cable of size 250 x 115 x 75mm for protection under ground cable complete all as specified and directed

Material & labour for GI pipe 50mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed .Make: Tata/Swastik/Jindal

Supply and providing river sand for cushioning with dry clean sand 15 cm below cable and 8 cm above the under ground cables and necessary fillings in the trenches and punning to provide required cover complete all as specified and directed.

Supply and spreading stone agrregate 20 to 40 mm laying,deposited,spreading and levelled in layers n exc 15 cm thick, watered and rammed to a true surface at around the newly installed transformer complete all as specified and directed

Material and labour for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.ISI Marked IS-15801 lying in trenches/wallc/ceilings or in floors and necessary clamps, saddles etc complete of size outer dia 25 mm complete all as specified and directed.

Supply and fixing PPR gate valve(Brass insert) of dia 25 mm fixing at near to building on wall upto one meter height complete all as spfd and directed.

Making connections of PPR pipes distribution branches with PPR main of following sizes of 50 to75 mm by providing and fixing tee including cutting and making fusion joint etc

M/S. KISHAN ENGINEERING

M/S.J.BIJAYA KUMAR PATRO

M/S S. N. ENTERPRISES

M/s M M Engineering Systems

R J ENTERPRISES

V.Venkata Ramaiah

R K Traders