SITC Electrical work OPD Vasundhara

Amount

PROVIDING AND FIXING OF SWITCH SOCKET & MODULAR ACCESSORIES

5 A, switch

5 A, socket

15 A, switch

15 A, 3 pin Socket

fan dimmer, 400/600W

1 or 2 way MS BOX

3 way MS BOX

6 way MS BOX

8 way MS BOX

12 way MS BOX

1 way FACE PLATE

3 way FACE PLATE

6 way FACE PLATE

8 way FACE PLATE

12 way FACE PLATE

Cord less bell

SUPPLY AND FIXING OF LIGHTING FIXTURES

Box type LED light fitting with 1 X22W led tube light complete with all accessories.

22W 4' long LED tube

2' long surface type LED lighting fixture or evaialant decoratve fitting for mirror

9W/11W surface/conceal mounted LED lighting fixture

18W surface/conceal mounted LED lighting fixture

24W surface/conceal mounted LED lighting fixture

3W/5W LED Lamp with holder

150W LED Flood Light outdoor type IP-65 with mounting bracket/stand on wall

SUPPLY AND FIXING OF CEILING FANS /WALL FANS/PEDASTAL FANS/EX-FANS

Ceiling Fan 1200mm Size

Ceiling Fan 900mm Size

Wall Fan 1-phase 4-speed

Wall Fan 1-phase 4-speed heavy Duty

Providing Pedastal fan 1-phase

Providing Pedastal Fan 1-pase Heavy duty

Ex-Fan 200mm PVC body

Ex-Fan 225mm Metal body

Ex-Fan 300mm Metal body

SUPPLY AND FIXING OFTELEPHONE, TELEVISION, DATA POINT

SITC of CAT-6 type I/O with RJ-45 socket with box, face plate and fixing screws, having the compliance / certificate for ISO 9001:2015 & ROHN for DATA and Telephone

1 way TV socket

SUPPLY AND FIXING OF WIRING FOR LIGHTING / TELEPHONE/LAN / PVC TRUNKING

Comscope Systimax Gigaspeed XL or equivalent CAT 6 cable through provided casing-capping, PVC conduit all as directed by O-I-C, ES

1.5 sq. mm copper wire

2.5 sq. mm copper wire

4 sq. mm copper wire (for split A/C)

6 sq. mm copper wire (For Tower A/C)

1.25Inch casing capping

25 mm PVC Conduit with accessaries , necessary supports/clamps, etc. as required.

8 SWG tinned copper bare wire for earthing

50x50x2mm PVC Trunking

100x50x2mm PVC Trunking

SUPPLY AND LAYING OF CABLING FOR AC UNITS, DB's AND LIFT

3.5 x 25 sq. mm Al conductor Arm. For Extended area

3.5 x 35 sq. mm Al conductor Arm. For Extended area

3 x 2.5 sq. mm PVC flexible cable Cu

3 x 1.5 sq. mm flexible cable Cu

4CX10 sqmm Copper conductor armoured cable for lift power.

3Cx2.5 sqmm copper conductor armoured cable for lift Lighting.

40A TPN ELMCB with enclosure

25A DP ELMCB with enclosure

SUPPLY AND FIXING OF CABLE END TERMINATIONS

Cable gland for 3.5cx25sqmm cable

Cable gland for 3.5cx35sqmm cable

16 sqmm copper Lug

25 sqmm copper Lug

35 sqmm copper Lug

SUPPLY AND FIXING OF AC POWER POINT

32 Amps 4 pin + earth reroll type Crompton/ MDS/ Cutler Hammer or approved make metallic socket. - 1 no./32 Amps MDS make TPN MCB as a controlling S/W – 1 No/32 Amps Crompton/ MDS/ Cutler Hammer make top

20A AC MCB 2 pin + earth with enclosure for AC

32A DP MCB

SUPPLY AND FIXING OF POWER DISTRIBUTION BOARDS

DISTRIBUTION BOARDS for 63 amps TPN MCB-1 No. /// 40 amps DP ELCB(100 mA)--3 Nos. /// 20 amps SP MCB(12 ways)--36 Nos. Providing & erecting distribution made out of 2 mm thick (in case of fabrication) MS CRCA sheet with concealed hinges, mounted on MS angle frame & grouted on the wall/fixed on the coloum with anchor fastener with earthing terminal, neutral link, interconnection with adequate size of Bus-bar/wires, interior of the DB shall be covered with 3 mm thick FRP sheet with necessary cut out, neoprene gasket, painting with seven tank metal treatment process(Shade to be got approved)/powder coating all as per instructions of E-I--C, complete in all respect.

Lighting Distribution Board

DISTRIBUTION BOARDS for 40 amps TPN MCB-- 1 No /// .25amps DP ELCB(30mA)-- 3 Nos /// .6 amps SP MCB (8 ways)-- 24 Nos.(Composite)Providing & erecting distribution made out of 2 mm thick (in case of fabrication) MS CRCA sheet with concealed hinges, mounted on MS angle frame & grouted on the wall/fixed on the coloum with anchor fastener with earthing terminal, neutral link, interconnection with adequate size of Bus-bar/wires, interior of the DB shall be covered with 3 mm thick FRP sheet with necessary cut out, neoprene gasket, painting with seven tank metal treatment process(Shade to be got approved)/powder coating all as per instructions of E-I--C, complete in all respect.

32A TPN MCB with enclosure

40A TPN MCB with enclosure

63A TPN MCB with enclosure

Dismentaling & Refixing

Dismentaling of existing light/fan/switch boards, wirs, DB's. etc.and re-fixing of existing room DB's at desired location.

Emergency Power Supply

Main Power panel comprising :-Incomer (From Asha Niwas Service Block) a) 1 no. 315A, 433V, 50 KA, TPN MCCB with 3 nos . metering CT's, MFM(EM6436) with RS 485 connection, R-Y-B, ON,OFF,TRIP indication lamp, 6A MCB's, neutral links, etc. Outgoing a) 2 nos.-TPN, 125 A-50 kA MCCB with cable spreader , integral LSI protection, R/G/A lamps. b) 10 nos.-TPN, 63 A-50 kA MCCB with cable spreader, with integral LSI protection, 3R/G/A lamps. c) 2 nos.-TPN, 32 A-36 kA MCCB with cable spreader, R/G/A lamps.

DISTRIBUTION BOARDS for 63 amps TPN MCB-1 No. /// 40 amps DP ELCB(100 mA)--3 Nos. /// 16 amps SP MCB(12 ways)--36 Nos. Providing & erecting distribution made out of 2 mm thick (in case of fabrication) MS CRCA sheet with concealed hinges, mounted on MS angle frame & grouted on the wall/fixed on the coloum with anchor fastener with earthing terminal, neutral link, interconnection with adequate size of Bus-bar/wires, interior of the DB shall be covered with 3 mm thick FRP sheet with necessary cut out, neoprene gasket, painting with seven tank metal treatment process(Shade to be got approved)/powder coating all as per instructions.

Supply ,Installation,Testing & Commisioning of 1.1 KV, PVC/XLPE armoured cable 3½core 300 sq mm aluminium conductor on wall/trench or laid 900mm below the ground level as per instructions.

Supply ,Installation,Testing & Commisioning of 1.1 KV, PVC/XLPE armoured cable 3½core 35 sq mm aluminium conductor on wall/trench as per instructions.

Supply and fixing of Cable gland for 3.5cx300sqmm cable

Supply and fixing of Cable gland for 3.5cx35sqmm cable

Supply and fixing of 300sqmm size copper lug

Supply and fixing of 150sqmm size copper lug

Supply and fixing of 35sqmm size copper lug

Supply and fixing of 16sqmm size copper lug

Supply and fixing of 25x3mm copper earthing strip

Supply and fixing of 8 SWG bare copper wire

Tinned copper earth plate electrode 600 x 600 x 3.15 mm earth station, 2.5 mtr below ground level as per drawing complete with all required materials like Cole, charcoal, salt, brass nut bolts & washers, watering arrangements, GI pipe (B class), concrete chamber, heavy duty cast iron cover plate & excavation in all types of soil in ground refilling & removal excess earth within a radius of 500 mtr. Etc. (2 Nos, of neutral earthing of T/F, 2 Nos. for T/f body earthing & 2 Nos. for panel earthing)Note:1.The chamber cover & plate shall be of heavy-duty hinged type & it shall weigh approx. 65 to 75 Kgs. For 450 x 450 mm size & shall be got approved by dept. (6 mm chequred plate with 40 x 40 x 6 mm angle iron frame)2.Plastering shall be done both inside & out side.3.The measurement of resistance of earth station & resistance of complete scheme of earthing layout shall be measured, recorded & got approved by Engg-in-charge.

Daanish Electricals and Sales Pvt. Ltd.

OM POWER SYSTEMS

Kolhatkar Electrical

PRANIT PROCONCO

Falcon TechnoProjects India Pvt Ltd

HITECH CONSTRUCTION GROUP

Ramesh Electrical and Mechanical Works

Nutanvij electricals