Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.5 LAccepted-AOC C O BALAJI GLASS HOUSE OPP SBI MATHGHARIA NARENGI TINIALI GUWAHATI KAMRUP M ASSAM 781026 | KAMRUP METRO | ASSAM | 781026 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹40.8 L+₹3.5 L (9.24%)Rejected-Finance H NO 18 BY LANE NO 09 SATGAON PRAGATI NAGAR GUWAHATI ASSAM 781171 | KAMRUP METRO | ASSAM | 781171 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹41.2 L+₹3.9 L (10.4%)Rejected-Finance OPPOSITE MERCEDES SHOWROOM NALAPARA BIHARBARI GUWAHATI 781029 ASSAM | RI BHOI | MEGHALAYA | 781029 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹41.6 L+₹4.3 L (11.5%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Narangi
GE Narangi C/o 99 APO
CERTAIN MISC BR RAPAIR TO OTM ACCN IN 3 JAK RIF AND SINGLE OFFICERS ACCN AT TARAPORE ENCLAVE IN THE AOR OF AGE BR II GE NARANGI
2023_MES_598186_1
8862/B/E8
Open Tender
Civil Works
Item Rate
180 days
GE Narangi
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE Narangi
₹90,000
Yes
22 Jul 2023
25 May 2023
28 Jun 2023
25 May 2023
26 Jun 2023
7 Jun 2023
Amount
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
M&L for brickwork with subclass ‘B’ old sized bricks, straight or curved on plan to any radius in exceeding 6 m mean radius built in CM 1:6 etc complete all as specified as directed.
All as per item No. 2 above but except bricks. ( Serviceable bricks shall be obtained from demolition of old brick work) complete all as specified and as directed.
M&L for brickwork with subclass ‘B’ old sized bricks, straight or curved on plan to any radius in half brick thick walls and built in CM 1:4 etc complete all as specified as directed.
M&L for brickwork with subclass ‘B’ old sized bricks, laid flat laid dry and pointed in CM 1:3 complete all as specified as directed.
Demolition of plain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in filling/mass concrete in sunken floor complete all as specified and directed.
M&L PCC 1:3:6 type C-2 using 40mm graded aggregate as in surface channel and drain complete all as specified and directed.
M&L PCC 1:2:4 type B-1 using 20mm graded aggregate as in coping, benching, haunching between roof and wall or parapet wall, between chajja and wall etc. including necessary formwork complete all as specified and directed.
M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.
M&L PCC (1:3:6) type C-0 (using 12.5 mm graded stone aggregate) in back filling in pressed steel door/window frame complete all as specified and as directed.
M & L for 25 mm thick PCC 1:2:4, type B1 (using 20 mm graded stone aggregates) as in floor finished the surface even and smooth without using extra cement and applying concrete colour pigment of appproved colour complete all as specified and as directed.
M&L in repair 25mm thick 1:2:4 type B-0 precast cement concrete louvers and jallies in shape ( measured solid) as directed including wire reinforced and set in CM 1 :6 complete all as specified and directed.
M&L PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) in hold fast block or bed block complete all as specified and as directed.
M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.
M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following of treatment/specification from bottom to top:- (i) Taking out old roof treatment and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish not exceeding 100 mtr distance from starting point. (ii) Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 with mixing of WPC and surface finished fare and smooth without using extra cement after applying a coat of cement slurry @ 3 kg/sqm for laying APP membrane. (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986. (iv) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above over by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (v) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm each including builders hardware complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.
Taking down shutter of any description n exc 1 Sqm each and refixing in same opening complete all as specified and as directed.
Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each and refixing in same opening complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section (unframed work), in any position complete all as specified & as directed.
M & L second class hard wood scantling fixed in clean sawn timber ( framed work) complete all as specified and as directed
M&L in repair for seccond class hard wood weather boarding, clean sawn, plain, 20mm thick or feather edged 15 to 20mm thick and fixed with 30mm laps complete all as specified and directed.
M&L in repair 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed.
M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (without sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed.
M&L for 1.25mm thick factory made pressed steel frames of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete i all as specified and directed.
M&L for 1.25mm thick factory made pressed steel frames of size 125x60mm with one or more rebatesincluding necessary fixing lugs, hinges, lock strike plate, etc complete including PCC 1:3:6 type C-0 as in back filling of window/door frame all as specified and directed.
S & F factory made steel windows with side hung shutters glazed shutter including both side openable (out side glazed window and inside fly proof window) including projecting type hinges with steel handle and steel peg stay complete with glazing bars and 12 mm square bar or round bar of approved design welded to steel window frame dovetailed or welded complete all as specified and directed . Note: Guard bar or square bar shall be measure and paid separately.
S&F steel ventilators with top hung shutters including hinges , steel peg stay complete all as specified & as directed .
S&F 35 mm thick flush shutter, solid core construction with block board core and plywood face panel, commercial type on both side complete all as specified and directed.
S&F 30 mm thick Factory Made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet 5mm thick ‘C’ channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and plain colour PVC sheets for top rail, lock rail & bottom rail on either side, and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s instructions and drawing. The width of stiles & rails will be in proportion to the width of the door shutter as per SSR Clause No 8B.2.1
M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing etc complete all as directed.
S & F anodised aluminium push, pull type partly panelled and partly glazed door shutter( single leaf/double leaf ) ha ving top rail of section 85.00mmX44.45mm X2.00mm thick, bottom rail of section 85.00mmX44.45mm X2.00mm thick door vertical of section 44.45mmX44.45mmX2.00mm thick and lock rail of section 85.00mmX44.45mm X2.00mm thick with aluminium anodised chowkat of section 63.50mmX33.10mmX2.50mm thick including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle, locking arrangement, including 12mm thick prelaminated particle board prelaminated with decorative face lamination, interior grade both sides on bottom panel and 5.50mm thick float glass tinted quality on top panel including aluminium door closure fixed to door complete all as specified and as directed
S & F anodised aluminium sliding glazed window/partition wall shutter ( double leaf glazed shutter and single leaf mosquito proof shutter each in single frame work) without sash bars with anodised aluminium shutter of section 40.00mmX20.00mmX1.10mm thick and window chowkat of section 92.00mmX29.50mmX1.20mm thick including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle, tower bolts and locking arrangement etc. including 4mm thick sheet glass tinted quality on panel and stainless steel wirecloth or aluminium anodised wire cloth for mosquito proofing 0.45mm nominal dia and average width of aperture 1.40mm fixed with aluminium screws and tacks and making good disturbed surfaces.
S & F 100 mm size mild steel butt hinge cold rolled medium weight complete all as specified and as directed.
S&F 200 mm size aluminum anodised, barrel tower bolts of extruded section etc complete all as directed.
S&F 150 mm size aluminum anodised, barrel tower bolts of extruded section etc complete all as directed.
S&F 150mm size extruded aluminium handles, febricated type, anodised complete all as specified and directed.
S&F in repair mortice lock two lever brass 100mm vertical type complete all as specified and directed.
S&F in repair Door closer hydraulically regulated, designation no 3 ,universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified & as directed.
S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminiun alloy sheet foundation box , main body with stainless steel cover governing pivot made of brass , other parts made of mild steel heavy duty complete all as specified and directed .
S&F aluminum alloy anodised, sliding door bolts with hasp and staple, (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long etc complete all as specified and directed.
S&F in repair mild steel PVC coated drapery rod coloured 25mm dia for curtains including decorative end holders and brackets ( wall to wall or flush to wall) for securing curtain rod complete all as specified and as directed.
S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as directed.
Dismantling of plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & as directed.
M&L Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and directed.
M&L Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified complete all as specified and directed. Note: To be executed for provision of ridges and hips.
S&F in repair suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement designer Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290, Gde-E-165 completed all as specified and directed.
S&F Rolled mld steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to Fe410-W ( Gde E-250 quality B) complete all as specified & as directed.
M/L cutting chases , pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring,etc. and making good , cutting exceeding 20cm girth complete all as specified and directed.
M & L for 100 mm thick PCC 1:4:8, type D2 (using 40 mm graded stone aggregates) as in sub base complete all as specified and as directed.
M & L for 75 mm thick PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregates) as in path / paving / hard standing / floor and finished the surface even and smooth without using extra cement complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.
M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M & L for glazed ceramic coloured tiles 300X200X7mm thick / 375mmX250mmX7mm thick, set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps etc over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.
M&L for Granite work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like with and including 20 mm bedding in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as specified and directed.
M&L for 20mm thick machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20mm thick screed bed in CM 1:6 complete all as specified and directed.
Demolition of stone slab and tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed.
M & L pre-polished cement concrete chequered tiles area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm and 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6) complete all as specified and directed.
M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade with 30mm thick sand cushioning with proper compacting through vibratory compaction by using plate vibrator including filling the joints with sand including demolition of old slabs and tiles complete all as specified & as directed.
M&L in repair heavy duty parking tiles of size 300mmX300mmX10 to 12mm thick/ 400mmX400mmX10 to 12 mm thick of approved make jointed in neat cement slurry, pointed in white or coloured cement to match colour of tiles, over and including 20 mm thick screed bed in cement mortar 1:6 including demolition of old slabs and tiles complete all as specified and as directed. complete all as specified & as directed.
Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
M&L for 5mm thick rendering in CM 1:3 on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with liquid water proofing compound (@ 200ml per 50 kg weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately as "Supply only".
Taking down eaves gutter and rain water pipes ( any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc. including cleaning or refifixing or removal to store ( measured overall as fixed along the centreline over fittings and accessories ) complete all as directed.
Supply only integral water proofing compound complete all as specified and as directed.
M&L complete removal of existing treatment of plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.
M&L complete removal of existing treatment of plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 1mm thick average thickness wall care putty complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed.
M&L for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
M & L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed.
M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old surfaces of steel and steel based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of steel and steel based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.
S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and as directed.
Taking up or down 15 mm bore GI tubing from trenches / wall including all fittings segregated, cleaning and stacking the pipe for reuse at site if required complete all as specified and as directed.
S & F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Refixing old serviceable 15 mm bore steel tubing and connections as obtained from taking up/ down old tubing including provision of new fittings, in new or old position of walls, ceiling, floor etc. complete all as specified and as directed.
Taking up or down 20 mm bore GI tubing from trenches / wall including all fittings segregated, cleaning and stacking the pipe for reuse at site if required complete all as specified and as directed.
S & F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Refixing old serviceable 20 mm bore steel tubing and connections as obtained from taking up/ down old tubing including provision of new fittings, in new or old position of walls, ceiling, floor etc. complete all as specified and as directed.
S&F in repair 15mm dia Bib taps quarter turn cast copper alloy chromium plated, with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairs, stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.
S&F in repairs, 15mm bore pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repair 15mm bore dia of concealed stop valves cast copper alloy fancy type chromium plated with long shank and cup complete all as specified and as directed.
Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity upto 1000 litrs complete all as specified and as directed.
S&F in repair rotational moulded polyethylene water storage tank 1000 litre capacity of triple layered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tank 500 litre capacity of triple layered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.
S&F in repair, brass chromium plated tubular towel rail of 20mm dia and 60cm in length, D shaped, with brass chromium plated brackets complete all as specified and as directed.
S&F in repair 20 mm bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe etc complete all as specified and as directed.
S & F in repairs, 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed.
S & F in repairs, 75mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed.
S&F 110 mm dia PVC (SWR) bends of any radius complete all as specified and directed
S&F 75 mm dia PVC (SWR) bends of any radius with access door complete all as specified and directed
S & F 110mm bore PVC ( SWR) junction, single (Single T) equal or unequal with oval access door complete all as specified and directed.
S & F 75mm bore PVC ( SWR) junction, single (Single T) equal or unequal with oval access door complete all as specified and directed.
S & F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
S & F in repairs, Vitreous China wash down one piece water closet pan ( EWC) Italian collection, ( RENE starwhite) of size 59cmX36cmX71cm ( pedestal pattern) complete series, white, including vitreous china flushing cistern ( inbuilt with WC) and plastic water closet seat white closed pattern with fklat bottom and cover, mild steel chromium plated or aluminium hinging device including connection to drain ( out going pipe) and to flushing pipe, antisyphonage pipe Etc. complete all as specified and as directed.Make Hindware , Cat No. 92088 ( S-30).
S & F in repair vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.
S&F in repair viterous china squatting pan Orissa pattern size 580 x 440mm white with integral foot rest, but excluding flushing cistern but including 'P' or 'S' trap and provision of lime concrete bedding complete all as specified and directed.
S&F in repair vitreous china wash basin white flat back size 550 mm x 400mm including all fittings including cutting for and pinning in ends of brackets or erecting stand etc complete (waste coupling 32mm bore CP, 32mm bore PVC waste pipe, cast iron brackets etc shall be deemed to be included in the quoted rate) complete all as specified and directed.
S & F in repair chromium plated wall mixer 15mm size complete all as specified and as directed.
S & F in repair chromium plated centre hole wash basin mixer 15mm size complete all as specified and as directed.
S&F in repair glass shelf of size 600mmX150mm fixed with chromium plated brass screw complete all as specified and directed.
S&F in repair glass shelf of size 450mmX150mm with chromium plated guard rail below mirror for keeping soap box complete all as specified and directed.
S&F in repair plastic water closet seat, white, closed pattern with flat bottom and cover with mild steel chromium plated or aluminium hinging device complete all as specified & as directed.
S&F in repair PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets complete all as specified and directed.
S & F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
S & F in repairs, stainless steel kitchen rack made of 0.65mm thick stainless steel sheet of size,600mmX900mmX250mm fixed to wall with screws complete all as specified and as directed.
S & F in repairs, 125 mm, dia chromium plated, swivel type shower rose with 190 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipe complete all as specified and as directed.
S & F in repairs, PVC connection pipe 15mm dia and 450 mm long with PVC PTMT nuts at each ends with rubber washers complete all as specified and directed.
S & F in repair health faucet ABS with 1.2m SS flexible tube and ABS wall hook fixed with necessary fixers complete all as specified and as directed.
S&F in repair chromium plated soap dish of approximate size 160x160x90mm embedded in wall complete all as specified & as directed.
SHANKAR ENTERPRISE
M/S P&R CONSTRUCTIONS
M/S M Ahmed and Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .