SPECIAL REPAIR TO INTERNAL WIRING AND FITTINGS TO BUILDING NO. P-85 AT AFAC COIMBATORE

Material and labour for providing aluminium frame work supported by hanger 6mm dia Galvanised Iron (up to length as per site requirement) for false ceiling, adjusting level fixed to roof slabs/ walls/wooden members by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 cm long and expansion hold fasteners 12.5mm dia 40 mm long, complete all as specified & directed. (Note - Screws & other accessories shall be as per manufactures instructions)

Material and labour for Providing 12 mm thick Gypsum Board in ceiling, complete all as specified & directed. (Note - Screws & other accessories shall be as per manufactures instructions)

Taking down cement plaster on brick or concrete wall surface including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified & directed.

Material & Labour in wall for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished fair and even without using extra cement, complete all as specified & directed.

Material and labour 5 mm thick cement plaster in cement mortar 1:3 for ceiling finished even & smooth without using extra cement, complete all as specified & directed.

Material & Labour for complete removal of old decorated surface of ceiling by brooming down and by steel wire brushing scrapping down smoke spot, moulds, moss and efflorescent salts, trading oil and greasy spots including preparing of old decorated surface of ceiling & applying 3mm thick wall care putty including preparation of surfaces by rubbing with sand paper to achive smooth and even and applying two coats of acrylic distemper over a coat of alkali resistant primer, complete all as specified & directed.

Material & Labour for complete removal of old decorated surface of wall by brooming down and by steel wire brushing scrapping down smoke spot, moulds, moss and efflorescent salts, trading oil and greasy spots including preparing of old decorated surface of walls & applying 3mm thick wall care putty including preparation of surfaces by rubbing with sand paper to achive smooth and even and applying two coats of acrylic distemper over a coat of alkali resistant primer, complete all as specified & directed.

Material & Labour for preparation of old walls surfaces by rubbing with sand paper to achive smooth and even surface and applying two coats of acrylic distemper over a coat of alkali resistant primer, complete all as specified & directed.

Material & Labour for preparation of old ceiling surfaces by rubbing with sand paper to achive smooth and even surface and applying two coats of acrylic distemper over a coat of alkali resistant primer, complete all as specified & directed.

Material & Labour for new surface of ceiling and apply 3mm thick wall care putty on ceiling including preparation of surfaces by rubbing with sand paper to achive smooth and even surface and applying two coats of acrylic distemper over a coat of alkali resistant primer, complete all as specified & directed.

Material & Labour for new wall surface and apply for 3mm thick wall care putty on walls including preparation of surfaces by rubbing with sand paper to achive smooth and even surface and applying two coats of acrylic distemper over a coat of alkali resistant primer, complete all as specified & directed.

Material & Labour for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint, complete all as specified & directed.

Material & Labour for preparing, washing, rubbing down and complete removal of existing treatment for applying Dampness treatment on walls/ceiling of required shade and applying two coats of waterproffing damp proof over a coat of self priming damp proof on vertical and horizontal of Internal and external surfaces, complete all as specified and directed. (Make : Dr Fixit/ Asian smartcare damp proof/ equvalent in STP ) (Note : Application process and Dilution propotions as per manufature instructions)

Dismantling wall and ceiling boards (Fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets, frame work, complete all as specified and directed.

Taking down old unserviceable point wiring (light, fan socket or power) complete, including fixture and fittings such as switches,ceiling rose, pendents, regulators,sockets, light fittings etc.removing materials for keeping for taking credit( credit for above items should be made as per conditions separately) and making good disturbed surface of walls floors etc. all as specified.

Taking down old unserviceable submain wiring of any size including GI/copper earth continuity conductor in PVC conduit on wall/roof and making good to disturbed surfaces all as directed.

Taking down Ceiling fan sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces complete all as specified and as directed.

Refixing only Ceiling fan with and including carrying out cleaning servicing, oiling and greasing of ceiling fans and connecting up including provision of cable from celling rose/ connector to fan all as specified and as directed.

Taking down exhaust fan, sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces complete all as specified and as directed.

Refixing only exhaust fan ( In Repair) and connecting up including provision of cable from celling rose/ connector to fan all as specified and as directed.

Disconnecting electric connection and taking down main switch/SPN DB/TPN DB of any size and keep in safe custody for taking credit complete and good/levelling the disturbed surfaces of wall to match with existing surface.

Material & Labour for concealed Point wiring with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc for one light / bell point controlled by one, one way switch, complete all as specified and as directed. (Note : Cutting chases will be Measured and paid seperately)

Material & Labour for concealed Point wiring with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc for one ceiling/exhaust fan point controlled by one, one way switch, complete all as specified and as directed. (Note : Cutting chases will be Measured and paid seperately)

Material & Labour for concealed Point wiring with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc for one light point controlled by two 2 way swithch, complete all as specified and as directed. (Note : Cutting chases will be Measured and paid seperately)

Material & Labour for concealed Point wiring with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc for ne 05 Amps socket outlet point on same board, complete all as specified and as directed. (Note : Cutting chases will be Measured and paid seperately)

Material & Labour for concealed Point wiring with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc for one switch socket outlet point 5 Amps on independent board, complete all as specified and as directed. (Note : Cutting chases will be Measured and paid seperately)

Material & Labour for concealed Point wiring with 2.5 Sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 2.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc for one 3 pin socket outlet, 15 Amps on independent board, complete all as specified and as directed. (Note : Cutting chases will be Measured and paid seperately)

Material & Labour for concealed Point wiring with 4 Sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc for one light / bell point controlled by one, one way switch, complete all as specified and as directed. (Note : Cutting chases will be Measured and paid seperately)

Supply & Fixing Switch Modular 6A single pole, one way, 1 module, complete all as specified and as directed.

Supply & Fixing Switch Modular 6A single pole, two way, 1 module, complete all as specified and as directed.

Supply & Fixing Switch Modular 16A single pole, one way, 1 module, complete all as specified and as directed.

Supply & Fixing Modular Modular Bell Push 6A 1 Module, complete all as specified and as directed.

Supply & Fixing Socket, 6A - 2/3 pin combined 2 module, complete all as specified and as directed.

Supply & Fixing socket Modular 6/16A 2/3 pin combined 2 module, complete all as specified and as directed.

Supply & Fixing Modular fan regulator step type 120 W, 2 module, complete all as specified and as directed.

Material and labour for taking down light fittings any type from its postion and keep it in safe custody and refixing the same after complete the wiring connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

Supply and fixing LED lights fitting set 1 x 18/ 20W, 220V,AC mushroom type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

Supply and fixing LED lights fitting 1 x 9 watts IRIS slim panel light squre/round recess mounting type, 220V,AC with driver, holder including LED lamp, necessary cutting in recess where required connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

Supply and fixing LED lights fitting 1 x 3 watts IRIS slim panel light squre/round recess mounting type, 220V,AC with driver, holder including LED lamp, necessary cutting in recess where required connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

Supply and fixing LED lights fitting 1 x 12 watts IRIS slim panel light squre/round surface mounting type, 220V,AC with driver, holder including LED lamp, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

Supply and fixing LED down light fitting 1 x 5 watts Duro series panel light round recess mounting type, 220V,AC with driver, holder including LED lamp, necessary cutting in recess where required connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

Supply and fixing LED track light 60 degree rotation 12 watt 220 V AC white decorative type with driver and LED lamp including connecting up with three core flexiblecopper conductor cable white colour of suitable size, complete all as specified and as directed.

Supply and fixing white colour channal for track light with connecter suitable for 12 watts LED track lights including connecting up with three core flexiblecopper conductor cable white colour of suitable size, complete all as specified and as directed.

Supply and fixing LED indoor wall light Leora series 1x 12 watts 220 V AC surface mounting type with hight efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp including connecting up with driver three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet 10 watt 220 V ACdecorative type with driver holder and LED lamp including connecting up with three core flexiblecopper conductor cable of suitable size, complete all as specified and as directed.

Supply and fixing celing suspended LED indoor light Akino P1 series 1x 20 watts 220 V AC suspended type with hight efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp including connecting up with driver three core flexible copper conductor cable of suitable size, complete all as specified and as directed. (Note : Sl No 23 to 32 the rate included for taking down the fitting)

Supply and fix Call Bell Ding Dong AC 230 V single pole complete connecting up with flexible copperconductor cable of suitable size, complete all as specified and as directed.

Supply and fix MCB DB, TPN, 4 ways, Double door, 415 volt, isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09, complete all as specified and as directed.

Supply and fix MCB DB, vetical MCCB as a incommer TPN, 8 ways, Double door, 415 volt, isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete and necessary input connection from existing busbar chamber, complete all as specified and as directed.

Supply and fix MCB DB, SPN, 12 ways, double door, 240 volt, Isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09, complete all as specified and as directed.

Supply and fix MCB DB, SPN, 8 ways, double door, 240 volt, Isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09, complete all as specified and as directed.

Supply and fix MCB DB, SPN, 4 ways, double door, 240 volt, Isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09, complete all as specified and as directed.

Supply and fix MCCB 415 volts 16 KA four pole suitable for vertical TPN of capacity 125 amps including taking down unserviceable MCCB, complete all as specified and as directed.

Supply and fix MCB SP 6 to 32 Amps, 240Volts, 10 KA, "B" Curve, complete all as specified and as directed.

Supply and fixing SPN 32 Amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB), complete all as specified and as directed.

Supply and fixing TPN/FP 40 to 63 Amp rating 415 V, 10 KA 'B' curve miniature circuit breaker (MCB), complete all as specified and as directed.

Supply and fixing DP/TP40 to 63 Amp rating 415 V, 10 KA 'B' curve miniature circuit breaker (MCB), complete all as specified and as directed.

Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals, complete all as specified and as directed.

Supply and laying PVC non metalic conduit including tees, bends, elbows, reducers, and fixing accessaries etc for telephone/TV connection of size 20 mm dia, complete all as specified and as directed. Note (i) Cutting chases will be Measured and paid seperately (ii) TV/Telephone cable provide by user Section .

Supply and fixing PVC non metalic junction boxes one to four way for telephone/TV connection of size 20 mm dia, complete all as specified and as directed.

Supply and fix modular telphone socket RJ 11 one module including taking down unserviceable socket, complete all as specified and as directed.

Supply and fix modular TV coaial socket one module including taking down unserviceable socket, complete all as specified and as directed.

Supply and fix pre wired powerunit with 20 amps mimi MCB and plug top for AC including taking down unserviceable socket, complete all as specified and as directed.

Material & Labour for earthing complete with GI earth plate electrode 600 x 600 x 6.3 mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to GI earth lead 4 mm wire by means of bolts, nuts, check nuts/bracing and washers all as shown in electrical plate No. 3 of SSR Part-I and including necessary excavation and earth work in any type of soil, removal and refilling of soil and funnel with wire mesh and GI watering pipe 20mm dia, Chamber in PCC 1:3:6, type C1 using 20mm graded stone aggregate and 40mm thick cover in RCC 1:2:4, type B1 using 20mm graded stone aggregate and reinforced with 8mm dia TMT bars at 150mm c/c on both ways, with flush type handle with 16mm dia round bars and 15 mm dia GI pipe upto 7.5m for protection and connected to earthing test point all as specified or indicated including testing on completion.

Material & Labour for concealed Sub main wiring by making recess in wall / surface complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etc Complete all as specified and as directed. (Note - 2 runs of 6 sqmm + 1 run of 6 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length)

Material & Labour for concealed Sub main wiring by making recess in wall / surface complete with 4 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall / Ceiling etc, complete all as specified and as directed. (Note - 4 runs of 6 sqmm + 1 run of 6 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length)

Material & Labour for concealed Sub main wiring by making recess in wall / surface complete with 2 runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etc complete all as specified and as directed. (Note - 2 runs of 4 sqmm + 1 run of 4 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length)

Material & Labour for concealed Sub main wiring by making recess in wall / surface complete with 4 runs of 10 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 10 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etc complete all as specified and as directed. (Note - 4 runs of 10 sqmm + 1 run of 10 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length)

Material & Labour for concealed Sub main wiring by making recess in wall / surface complete with 2 runs of 2.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 2.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etc complete all as specified and as directed. (Note - 2 runs of 2.5 sqmm + 1 run of 2.5 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length)

Material & Labour for concealed Sub main wiring by making recess in wall / surface complete with 2 runs of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etc complete all as specified and as directed. (Note - 2 runs of 1.5 sqmm + 1 run of 1.5 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length)

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exceeding 10 cm girth, complete all as specified and as directed.