REPAIR REPLACEMENT OF DAY TO DAY COMPLAINTS FAN GEYSER SOLAR WATER HEATER AND OTHER CONNECTED ITEMS UNDER AGE EM OF GE NAGROTA

Amount

SCHEDULE 'A' PART-I Identifying and rectifying the defects pertaining to internal electrification of any type and nature such as taking down and replacement of defective switch/socket/ceiling rose/holders/fittings /fixtures/ MCBs/MCB DBs of any type, rectification of faulty electric circuits, tightening of loose connections, replacment of old u/s wiring/conduits/casing caping & connections etc. complete all as specified & directed. Note: Switch/ Socket/ Ceiling roser/ holder/ other fittings shall be measured & paid for separately under respective items as supply only.

NOTE FOR ITEM NO 1 (a) All T & P/Stationeries and labour team required comprising of Minimum 02 Nos of skilled electrician & 02 helper will be provided by the contractor daily, as directed. (b) Rep of the contractor will present in complaint cell & responsible for receiving & attending the complaints from 08.30 Hrs to 04.30 Hrs for the time of lodging the complaint. In absence of rep of Contractor penal recovery of Rs.1000/- per complaint as decided by GE shall be imposed & on contractor & decision of GE shall be final & binding to contractor. (c) Cost of minor stores such as screws,clamps,insulation tapes,nuts/bolts, nail of required size etc shall deemed to be included in the above quoted item. However, major items such as switches, sockets, bell push, fan regulator etc shall be measured and paid for separately under appropriate items of Schedule 'A'. (d) Complaints where complete replacement of circuit/point wiring required shall be measured under relevent item. (e) If contractor fails to rectify the complaint with in 24 hours after reciving, Rs 500/- per complaint will be penalised. (f) Contractor will provide tools & khakhi uniform to the electrician and helper working in the contract

Supply only, switch piano flush type 5 Amps single pole one way complete all as specified & directed.

Supply only, switch piano flush type 15 Amps single pole one way complete all as specified & directed.

Supply only, socket out let multipurpose suitable for 2/3 pin 5 amp flush type complete all as specified & directed.

Supply only, socket out let multipurpose suitable for 3/5 pin 15 amp flush type complete all as specified & directed.

Supply only, switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified & directed.

Supply only, switch socket combination 2 in 1 5 pin 15 Amps flush type complete all as specified & directed.

Supply only Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body surface type 65mm x 50mm 2 to 3 terminal complete all as specified and directed.

Supply only Electronic modular step fan regulator ,Two module, electronic,step type and connection complete all as specified & directed.

Supply only Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd (300 Watt , 230 Volts, 50 Hz AC Supply) complete all as specified & directed.

Supply only, Batten/angle type holder insulated body with back plate complete all as specified & directed.

Supply only, bell push piano type 5 Amps complete all as specified & directed.

Supply only, electric bell ding dong 230 volt AC complete all as specified & directed.

Supply only, white / warm / cool white or 3 in 1 LED Light fitting 1x18 watt complete with all accessories 230V 50 Hz complete as specified and directed.

Supply only, 1 x 18 Watt tube rod (Surya) 230V 50 Hz complete as specified and directed.

Supply only, LED mirror Light (white/warm/cool white )10 Watt 230V frequency 50/60 Hz integral sleek extruded polycarbonate LED channel with white acrylic cover, Power Factor not less then 0.9 as complete as specified and directed.

Supply only of white/warm/cool white or 3 in 1 powder coated CRCA housing with LEDs 36W, 230 V, 50 Hz recess mounting LED 2 feet x 2 feet luminaries, Swamless front frame with flat white hight transmission acrylic cover complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable complete as specified and directed.

Supply only PVC gang box 4 way/8 Way to accommodate 5/15 Amps Switch and Socket. complete all as specified & directed.

Supply only of Bakalite sheet size 9x11 , 8x5 & 5x5 complete all as specified & directed.

Supply only LED light fitting 1x9W bulk head luminaries IP 65 complete with all accessories including LED lamp , connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V 50 Hz complete as specified and directed.

Supply only decorative wall mounted luminaire white / warm / cool white or 3 in 1 with & including 9 Watt LED lamp as per sample and making connection with 2 core PVC insulated and sheathed copper conductor cable of suitable size as specified and directed.

Supply only LED sleek white / warm / cool white or 3 in 1 surface round ceiling mounted decorative down light fitting with PC cover suitable for 1x15/18 watt including LED bulb as per sample and making connection with 2 core PVC insulated and sheathed copper conductor cable of suitable sizeall as specified and directed.

Supply only Decorative stylish adjustable Wall spot or focus light (Metal body) of 1 x 15 watt 230 Volt in white/warm / cool white as per sample complete with 2 core PVC insulated and sheathed copper conductor cable of suitable size all as specified and directed.

Supply only LED bulb white / warm / cool white or 3 in 1, 9/10 watt complete all as specified and directed.

Supply only modular switch 1 way, 6 amps 1module, 230V AC as per required colour at site complete all as specified and directed.

Supply only modular switch 1 way, 16 amps 1module, 230V AC as per required colour at site complete all as specified and directed.

Supply only Modular socket 6A-2/3 pin combined 2 module as per required colour at site all as specified and directed.

Supply only Modular socket 6A/16A, 2/3 pin combined 2 module as per required colour at site complete all as specified.

Supply only white / Brown / Wood Colour Modular Plate with modular base frame 3 module all as specified and directed

Supply only white / Brown / Wood Colour Modular Plate with modular base frame 6 module all as specified and directed

Supply only white / Brown / Wood Colour Modular Plate with modular base frame 8 module all as specified and directed

Supply only white / Brown / Wood Colour Modular Plate with modular base frame 12 module all as specified and directed

Supply only Modular Bell push 6A 1 module complete all as specified and directed.

Supply only MCB SPN 40 to 63 Amps 10 KA 230 volts "C" series complete complete as specified and directed.

Supply only MCB Single pole 6 to 32 Amps 10 KA 230 volts "C" series complete as specified and directed.

Supply only MCB SPN 32 Amps 10 KA 230 volts "C" series complete as specified and directed.

Supply only MCCB 4 pole 125 Amps 16 KA ,415 volts complete all as specified and directed.

Supply only MCB TPN 63 Amps 10 KA 230 volts "C" series complete as specified and directed.

Supply only PVC insulated unsheathed single core stranded copper conductor cable of size 1.5 sqmm complete as specified and directed.

Supply only PVC insulated unsheathed single core stranded copper conductor cable of size 2.5 sqmm complete as specified and directed.

Supply only PVC insulated unsheathed single core stranded copper conductor cable of size 4.0 sqmm complete as specified and directed.

Taking down carefully unserviceable aluminium point wiring (light, fan, socket bell or power) complete, (fittings such as switches, ceiling rose lamp holder, regulators, sockets, pendants) stacking at site and keeping in safe custody for taking credit, complete, all as specified.

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and in existing PVC conduit of any size , fixing acessories inculding sunken anodised pressed terminal box not less than 1.2 mm thick covered with 3 mm thick bakelite laminated sheet cover of suitable size with suitable size screws for mounting switches, sockets, regulators with and including 1.5 sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly for One light/fan point /bell point controlled by one switch switches/sockets/regulators complete all as specified & directed.

All as per Srl item N0 43 above but for one socket out let 5 Amp controlled by one switch on same board with other switch complete all as spd & directed

All as per Srl item N0 43 above for one socket out let 5 Amp controlled by one switch on independent board complete all as specified and directed

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20 mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed terminal box not less than 1.2 mm thick covered with 3 mm thick bakelite laminated sheet cover of suitable size with suitable size screws for mounting switches, sockets, regulators with and including 1.5 sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly for One light/fan point /bell point controlled by one switch switches/sockets/regulators complete all as specified & directed.

All as per Srl item N0 46 above for one socket out let 5 Amp controlled by one switch on independent board complete all as spd & directed

All as per item No 46 here in before but point wiring for one 3 pin 15 Amp socket outlet point controlled by one switch using 2.5 sqmm copper conductor cable with continuous earth wire of 2.5 sqmm copper conductor on independent board complete all as spd & directed

S&F Sheet metal enclosure for MCB distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete all as spd & directed . Note: The rate includes making good to disturbed surfaces of wall and colouring as per existing.

S&F Sheet metal enclosure for MCB Distribution board TPN 04 way 415 V, 50 Hz double door with neutral, Earthing bar and din rail complete all as spd & directed Note: The rate includes making good to disturbed surfaces of wall and colouring as per existing.

S&F Sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way in and including suitable size of MCCB 125 Amp, 16 KA, 4 Pole as incomer, (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site.

M&L for sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 06 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 25 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 06 sq mm as earth continuity conductor connected to commen earth and earth dolly complete all as spd & directed

M & L for Collecting the old burnt ceiling/exhaust/wall mounting fans of any size and sweep rewinding the same with super enameled copper winding wire of existing gauge & size including thoroughly cleaning all the components of fan, oiling , greesing & painting with one coat of syntetic enemel paint after scrbbing and perparing the old painted surface of the fan with and including complete replacement nuts bolts, canopy, split pin, rubber reel , machine screws, shaft bush/ball bearings, clamps, rubber pads, PCB, capacitor of suitable capacity, Wall fan regulator and PVC copper conductor cable complete including testing complete all as specified and directed. Note :- 1. If any issue will be raises in particular fan any number of times the contractor shall be repaired his own cost and will not be claimed any amount during the contract period. 2. Old retrieved material from the fans are contractors only and rate is deemed to be included in the item rate.

For Ceiling fan 1200/1400 mm of any model i.e. BLDC/old type

For Metallic body Exhaust fan of size 300 to 450 mm

Wall fan/Air circulator 400 to 600 mm sweep

Supply in replacement of adjustable aluminium blades for ceiling fan 1200/1400 mm sweep as per sample complete all as specified and directed

S & F in repairs flexible twin core 23/0.0076 with copper conductor including connecting fan of any make complete all as specified and directed.

Material and labour for replacement of Unserviceable Louvers with new louvers of exhaust fan 450mm sweep complete all as specified and directed.

Material and labour for replacement of Unserviceable Louvers with new louvers of exhaust fan 300/380 mm sweep complete all as specified and directed.

S&F in repairs Condenser of 2.5/3.15 MFD capacity after removing existing unserviceable condenser from any situation complete all as specified and directed.

Supply and fixing copper wounded ceiling fans comprising with 3 blades, down rod, set of 2 canopy, 1 shackle assemby complete accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM, energy efficient, BEE star rated energy efficient white in colour including making connections with copper conductor cable all as specified and directed. Make : CG /Havells/Orient

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers

Supply and fix Vent Air Exhaust fan 250/300 mm plastic body white colour, 1200 RPM, 230V AC, copper wounded with louvers complete including making connections all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Taking down the water heater storage type of any make of any capacity. dismantling the water heater carefully from its position fixed on walls, reassembling the water heater after replacement of defective parts, complete servicing, removing of scales and reinstalling the water heaters to their original locations or as directed, commissioning and testing the water heater complete, all as directed by the Engr-in-charge. Note: i) Any material/part found unserviceable during servicing shall be replaced by the contractor and measured and paid separately under respective items. ii) Payment for particular geyser is to be paid only once in entire contract period instead of number of times attend the complaints.

Supply only in place of unsv PVC connection of any make with (ISI Mark) having10/15mm dia, 45 cm long with steel reinforcement suitable for hot water geyser outlet supply with 02 Nos of Unions/ cup shaped cover with washers complete all as directed by Engr-in-charge.

Supply only in place of un PVC connection of any make with (ISI Mark) having 10/15mm dia, 45 cm long suitable for cold water geyser inlet with 02 Nos of Unions/ cup shaped PVC cover with washers complete all as directed by Engr-in-charge.

Supply only in place of unserviceable inlet /outlet assembly including rubber gasket of any make of geyser having six/seven/eight /nine hole suitable for Bathwell/ Bajaj / pearl water heater of capacity 25/50 litre complete all as directed by Engr-in Charge.

Supply only in place of unserviceable inlet /outlet assembly including rubber gasket of any make of geyser having six/seven/eight /nine hole suitable for Bathwell/ Bajaj / pearl water heater of capacity 10 litre complete all as directed by Engr-in Charge.

Supply only in place of unsv 4'' long and 1/2'' dia Chrome plated bolt with suitable washers complete all as directed by Engr-in-Charge.

Supply only in place of unsv split bottom cover (two pieces) suitable for water heater of any capacity duly painted, complete all as spd & directed

Supply only in place of unsv neon indicating lamp, rectangular /round as required at site, complete all as spd & directed

Supply only in place of unsv heating element 1.5 KW, single phase, 230 volt with triangular/round base as required at site suitable for 10/25/50 Ltr water heater complete all as spd & directed.

Supply only in place of unsv heating element 2.0 KW, single phase, 230 volt with triangular /round base as required at site suitable for 25/50 Ltr water heater. complete all as spd & directed

Supply only in place of long thermostat switch range upto 80”C suitable for 25/50 ltrs cap water heater complete all as spd & directed.

Supply only in place of unserviceable plug top 3 pin 15 Amps complete all as spd & directed

Supply only in place of unserviceable safety nut for geyser of capacity 10/25/50 ltrs complete all as spd & directed.

Supply only in place of unserviceable sheet metal enclosure with socket plug top and MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20Amp complete all as spd & directed

M & L for Dismantling the solar panel (made of flat collector plates) of any description, material and labour for cleaning the glass by washing with using soft detergent, cleaning & de-scaling the inside surface of copper fins / tubes with suitable size of drill rod, wire brush & with circulating concentrated de-scaling solution(ORISCALE BLASTER) mixed with water in suitable proportion circulating through pump till the complete deposits/scale is removed and approved by the Engineer-in-Charge, brazing the leaking copper tubes, fixing the copper tube & fins properly in their respective positions, reassembling the solar system after servicing / maintenance including replacement of flanges made out of gun metal, nuts, bolts & washers, gaskets etc., fixing & installation of the solar flat collector plate in position and its testing to the entire satisfaction of Engineer-in-Charge.

M & L for Opening of existing aluminium cladding from tank ,cleaning and stacking the same for reuse ,taking out glass wool and repairing the stainless steel tank and repairing the leakage by means of TIG welding as approved ,refilling of glass wool ,aluminium cladding by using old aluminium sheet complete all as directed by Engr- in -charge. Note:- Existing glass wool and aluminium sheet shall be reused, new glass wool and aluminium sheet if required shall be not measured and paid for separately complete all as specified and directed by Engineer-in-Charge.

M & L for Disconnecting and taking out old existing unserviceable water heating element of any description and in any position and supply, fixing new water heating element hexagonal/ Rectangular/circle type of capacity 5 KW with suitable thermostat as per existing site including all necessary fittings complete all as specified and directed.

M & L for Disconnecting and taking out old existing unserviceable water heating element of any description and in any position and supply, fixing new water heating element hexagonal/ Rectangular/circle type of capacity 3 KW with suitable thermostat as per existing site including all necessary fittings complete all as specified and directed.

M/S KALSI ENGINEERS AND CONTRACTORS (BID ID -3398193)

M/S PRAJAPATI ENGINEERS (BID ID -3405512)

M/S J S ENGINEERS (BID ID -3397443)

PAWAN KUMAR GOVT. CONTRACTORS (BID ID -3398183)

Nitika electricals and engineers works (BID ID -3398168)

Nationalconstruction (BID ID -3402869)

M/S CJ CONSTRUCTIONS (BID ID -3398280)