Construction Development of Divyang Park at CG City Lucknow

Civil Works

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Earth work in foundation in ordinary soil loam clay or sand including lift up to 1.5 m & lead up 30m including filling watering & ramming of excavated earth in to the trenches or in to the plinth removal & disposal of surplus earth as directed by the Engineer- in- charge up to distance 30m from the foundation trenches.

In all kind of soil upto 1.5m to 3.0m. depth

In all kind of soil upto 3.0m to 4.5m. depth

In all kind of soil upto 4.5 m to 6.0m. depth

Providing Supply and fixing of stone Pitching Boulder with all complete fixing as per the direction of Engineer in chage.

Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 stone grit 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.

Construction of granular sub base by providing well graded material ,spreading in uniform layers with motor grader on prepared surface ,mixing by mix in place method with rotavator at OMC & comacting with smooth wheel roller to achieve the desired density ,complete as per Technical Specification clause-401 G1

R.c.c. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion 1:1.5:3,(1cement :1.5 corse sand 3 grit) in lintels of doors and windows excluding supply of reinforcement and its fixing and bending but including its fixing and binding the same necessary with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not be less than M-20. As in item 4 above but in R.C.C. Raft foundation and footing with approved stone ballast. (Using 1:1.5:3 Mix concrete)

As in item 8 above but in R.C.C. columns in 1:1.5:3 having strength not less than M-20.

As in item 8 above but in R.C.C.BEAM in 1:1.5:3 having strength not less than M-20.

Providng Supply & Filling of carted earth as per analysis with all complete as per the direction of Engineer Incharge.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Class 150 brick work in 1:4 cement and course sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work.

Class 150 brick work for one brick thick wall in 1:4 cement and coarse sand of ( FM 2.25) mortar in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12cms.

Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.

12 mm cement plaster in single coat on fair side of single or half brick wall for interior plastering up to floor two level including brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and / or rounded angles not exceeding 80 mm in girth and finished even and smooth No. extra for mixing any additive. 1 cement :6 Coarsesand

Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation levelling & dressing & finishing the top smooth.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge

Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes.PWD-2019

Providing & fixing of REALBUY Solar Outdoor LED Wall Light 10W (3-in-ONE Colors) with Remote Controller - IP65 Water-Proof.as per the direction of Engineer in charge.

RCC WORK 1:2:4 pwd-4.1.3

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. (PWD-2.27)

Providing and laying World Athletics approved Synthetic athletic track 'Full PUR system' being produced in Europe/ Australia/ NZ/ America/India of minimum 15mm thickness, including line marking & Class II certification of the track by World Atheletics(WA) . Polyurethane material to be of European/ USA/ AUS/NZ/INDIA manufacture only and product to be verified before installation. EPDM & Binder material should be from the same OEM or from vendor recommended by OEM. Cost of World Athletics Class-II certification to be included.

Applying stamping finish to the top surface of freshly laid plain/ reinforced cement concrete of specified grade in porticos, sidewalks, driveways, pool decks and open yards as per direction of the Engineer in-Charge. The process shall include the following:- • The concrete shall be placed and screeded to the finished grade, and floated to a uniform surface by using standard finishing techniques. The approved color hardener @ 2.7 kg/sqm shall be applied evenly to the surface of the fresh concrete by the dry shake method by sprinkling in two or more shakes, floated after each shake and trowelled only after the final floating. The approved release agent @ 0.113 kg/sqm shall be applied evenly to the trowelled surface before stamping or the said release agent can be applied to the flexible polyurethane stamp moulds of approved design and in required sizes to achieve final stamped pattern. These stampings shall be placed on the surface of concrete in three to four pieces at a time and tapped gently with rammers of sufficient size & weight to leave proper stamp marks and the process repeated for the remaining concrete surface till the whole surface to be stamped is completed within the time while concrete is in plastic stage of setting.

15 mm cement plaster on plinth side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)

Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313(PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1)Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4) Treatment of soil along external perimeter of building 7.5 liters/sqm. (5) Treatment of soil under apron along external perimter 5 liters/sqm.

Class-150 brick work in 1:4 cement and coarse sand of 1.25 coarseness modulus mortar in super-structure. Above plinth level up to floor two level (up to two storey) including necessary cutting and molding of brick work as required and also including honey combed brick work in thickness of wall 12cms.

6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.

R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in slab excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.

Using M.S. Angles 35x35x5mm for diagonal braces.

Mild steel or iron work of small size and sections such as holding down bolts hold fast, tie rods, grating etc. ( when not included in an overall rates ) wrought to required shape as necessary for bending etc. including supply of steel and its wastage including cost of bolts, nuts if required, welding ,grinding and making holes as required for completion of work.

Fabrication of Z section fixed / Open able steel windows including necessary steel fitting such as handles stay etc.

Fabrication of window/Fixed Grill.

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 12 mm mild steel U beading

Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal sizelaid in onelayer neat cement(40 mm thickfloor).

20 mm thick cement plaster in dado/skirting in 1:2 consistingof onepart of cement and 2 partsof aprovedcoarse sand laid inpanels,finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials labour T & P etc. required for proper completion of the work.(PWD-597)

Providing and fixing of flush door shutters commercial quality conforming to IS : 2202 Part I (1983) including fixing fixing of wooden cleats & stoppers and including fixing and adjustment of hinges, bolts locks, handles, springs and other fittings but excluding their supply and including painting with two coats of black Japan paint on all iron fitting if necessary. Fitting with necessary screws to be supplied departmentally.30 mm thick Single leaf

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water tinnable priming coat with cement primer

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (a) 6 mm thick.

Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3 apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. SIZE 600MM X 600MM

Providing and laying rectified Glazed Ceramic WALL tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete PWD 11.39

Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrs PVC low level flushing cistern with fittings & brackets 40mm dia C.P. flush pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required. Orissa Pattern W.C. pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. a) 32mm dia

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 litre white P.V.C. automatic flushing cistern .

Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers.

Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing C.P. brass Two-way angle valve for EWC points & for fixing Ablution Health Fauct of approved quality conforming to IS:8931. 15 mm nominal bore

Providing & fixing on wall face PVC vent pipes including jointing with seal ring. a) 90mm dia PVC pipe.

a) 110mm dia PVC pipe. 2019

Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.a) for 100mm dia pipe.

a) for 100mm dia pipe.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design a) 150X100 mm

Providing and fixing plain PVC sanitary bend. a) 100 mm

Providing & fixing 32 MM G.I. Pipes complete with G.I Fittings & clamps i/c cutting & making good the walls etc.

Extra for providing & fixing PVC ball float valve with brass & union 20MM DIA

P/F Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stablity for hot and cold water supply including all CPVC plain and brass threaded fittings . . This includes jointing of pippes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Eng. I/C. a) 25mm dia nominal bore (medium duty)

a) 25mm dia nominal bore (medium duty)

b) 32mm dia nominal bore (medium duty)

c) 40mm dia nominal bore (medium duty)

P/F Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stablity for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 mt. spacing . This includes jointing of pippes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Eng. I/C. CONCEALED work including cutting ,chases and making good the wall etc. a)20mm dia nominal bore

b) 25mm dia nominal bore

Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. a) 15mm nominal bore

Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 a) 15mm nominal bore

Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. a) 15mm nominal bore

Providing and fixing C.P brass shower rose with 15 or 20 mm inlet 100 mm diameter

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m a) Pipes 80mm to 300mm diameter..

Providing, laying and joining glazed stone ware pipes heavy duty pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete a) 100mm diameter.

b) 150mm diameter

Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. a) 100mm diameter S.W. Pipe

Constructing brick masonry manhole with 75 class designation F.P.S. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement :4 coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design. a) Inside size 90x80 cm & 45 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg.

Suply & installation of FRP Manhole Cover with frame for rectangular size 600 x900 mm of 40T load carrying capacity .make RAW OR Equivalent.

Suply & installation of FRP Manhole Cover with frame for rectangular size 600 x600 mm of 2.5T load carrying capacity .make RAW OR Equivalent.

Suply & installation of FRP Manhole Cover with frame for rectangular size 600DIA of 2.5T load carrying capacity

Suply & installation of FRP Manhole Cover with frame for rectangular size 530 mm DIA of 2.5T load carrying capacity .

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 13 mm nominal size).

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Same as in item No. 13 above but in super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. (1:4 cement : coarse sand)

Same as in item no. 16 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work.

15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)

12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1) 1 cement : 4 fine sand F.M. 1.25

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor).

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. (when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Providing & fixing of hold fast for chaukhats of doors and windows.

Providing & fixing of door / windows grill.

Z-Section steel windows (Openable)

Angle iron door chaukhat 40*40*5

Fixing of Door, windows/ventilators chaukhats in position.(a) Door chaukhats

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).

Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Ceiling)

Supply and laying of 80mm thick I shaped mechanically compressed inter locking cement concrete pavers block manufactured by high pressure & controlled vibration machine having plan dimension 200x(160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder the compressive strength of concrete pavers blocks shall not be less than 30 MPa cost of all material, labour, T & P etc i/c levelling and dressing of surface required for proper completion of work as directed by Engineer-in-charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineerin- Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm

Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.

Same as above but for wooden surface.

P/F 6mm thick float glass panes with putty/nails of Modi/equivalent I.S.I. marked quality putty, brads and springs complete. 3.8mm to 4.7mm thick

Providing & fixing oxidised l sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .

Providing and fixing oxidised steel towerbolts (barrel type) with necessary screws etc. complete. (a) 100mm x 10mm

Providing and fixing oxidised steel handles with screws etc. complete (a) 125 mm.

Centering and shuttering including strutting, propping etc. and removal of formfor Foundations, footings, bases of columns, etc. for mass concrete

62 mm thick cement concrete flooring with concrete hardener topping, underlayer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20mm nominal size) and top layer 12mm thick cement hardenerconsisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mmnominal size) by volume, hardening compound mixed @ 2 litre per 50 kg ofcement or as per manufacture’s specifications. This includes cost of cementslurry, but excluding the cost of nosing of steps etc. complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting, fixing in position and applying a primingcoat of approved steel primer, including welding and bolted with special shapedwashers etc. complete. Electric resistance or induction butt welded tubes.

Supply & fixing of 10MM Multiwall Polycarbonate sheet with all fixing & J-hook as per the direction of Engineer in charge.

Supply & fixing ridge in position including supply of 'J' hooks, Nuts, washers and bitumen & supply of all materials labour T & P etc required for proper completion of the work.

Painting or vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950.Same as in item 641 above but for every coat after 1st coat. Details of cost for 650 sft. Area

12 mm thk Internal Plaster in 1:3 with c/s mortar in wall i/c all materials, labour & T&P etc.

Providing and installing FRP MOULDED grating (38x38x40 mm)having minium load carrying capacity of 2.5t/sqm for Drains with FRP Y-angles (5x25x38mm) at wherever indicated in drawing as per approved manufacturers specification & approvoal of the PM etc complete .

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 10 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment

Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Drilling of 300mm dia bore hole manually.

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction ofbEngineer-in-charge. 200mm nominal size dia

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading& sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge DSR 23..11

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of DSR 23.13

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.DSR 23.14

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). DSR 23.15

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. .

DOOR FRAME Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame .

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)

Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). Providing & fixng float glass 5 mm thick with all complete as fixing as per the direction of Engineer n charge.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab of all colour and texture exceptbBlack, Cherry/Ruby Red

Dismantling cement concrete or brick or granolithic floors; including base concrete and staking of dismantled materials floors to be stone flagged or tied floors as directed by the engineer in charge

Providing & fixng of RO 80 LTR WITH WATER Colkler with all complete fixing as per the direction of Engineer in charge.

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor).

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. (when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Providing & fixing of hold fast for chaukhats of doors and windows.

Providing & fixing of door / windows grill.

Z-Section steel windows (Openable)

Angle iron door chaukhat 40*40*5

Fixing of Door, windows/ventilators chaukhats in position.(a) Door chaukhats

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).

Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Ceiling)

Supply and laying of 80mm thick I shaped mechanically compressed inter locking cement concrete pavers block manufactured by high pressure & controlled vibration machine having plan dimension 200x(160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder the compressive strength of concrete pavers blocks shall not be less than 30 MPa cost of all material, labour, T & P etc i/c levelling and dressing of surface required for proper completion of work as directed by Engineer-in-charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineerin- Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm

Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.

Same as above but for wooden surface.

P/F 6mm thick float glass panes with putty/nails of Modi/equivalent I.S.I. marked quality putty, brads and springs complete. 3.8mm to 4.7mm thick

Providing & fixing oxidised l sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .

Providing and fixing oxidised steel towerbolts (barrel type) with necessary screws etc. complete. (a) 100mm x 10mm

Providing and fixing oxidised steel handles with screws etc. complete (a) 125 mm.

Centering and shuttering including strutting, propping etc. and removal of formfor Foundations, footings, bases of columns, etc. for mass concrete

62 mm thick cement concrete flooring with concrete hardener topping, underlayer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20mm nominal size) and top layer 12mm thick cement hardenerconsisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mmnominal size) by volume, hardening compound mixed @ 2 litre per 50 kg ofcement or as per manufacture’s specifications. This includes cost of cementslurry, but excluding the cost of nosing of steps etc. complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting, fixing in position and applying a primingcoat of approved steel primer, including welding and bolted with special shapedwashers etc. complete. Electric resistance or induction butt welded tubes.

Supply & fixing of 10MM Multiwall Polycarbonate sheet with all fixing & J-hook as per the direction of Engineer in charge.

Supply & fixing ridge in position including supply of 'J' hooks, Nuts, washers and bitumen & supply of all materials labour T & P etc required for proper completion of the work.

Painting or vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950.Same as in item 641 above but for every coat after 1st coat. Details of cost for 650 sft. Area

12 mm thk Internal Plaster in 1:3 with c/s mortar in wall i/c all materials, labour & T&P etc.

Providing and installing FRP MOULDED grating (38x38x40 mm)having minium load carrying capacity of 2.5t/sqm for Drains with FRP Y-angles (5x25x38mm) at wherever indicated in drawing as per approved manufacturers specification & approvoal of the PM etc complete .

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 10 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment

Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Drilling of 300mm dia bore hole manually.

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction ofbEngineer-in-charge. 200mm nominal size dia

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading& sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge DSR 23..11

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of DSR 23.13

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.DSR 23.14

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). DSR 23.15

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. .

DOOR FRAME Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame .

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)

Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). Providing & fixng float glass 5 mm thick with all complete as fixing as per the direction of Engineer n charge.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab of all colour and texture exceptbBlack, Cherry/Ruby Red

Dismantling cement concrete or brick or granolithic floors; including base concrete and staking of dismantled materials floors to be stone flagged or tied floors as directed by the engineer in charge

Providing & fixng of RO 80 LTR WITH WATER Colkler with all complete fixing as per the direction of Engineer in charge.

Providing & fixing of wooden Gazebo in wooden shaded with all roofing treatment with all complete as per the direction of Engineer in charge.

Providing & fixing of small fountian with all sprinkler with motor arrangement 1.5 hp with all fixing as per the direction of Engineer in charge.

Providing & fixing of big fountian with all sprinkler with motor arrangement 1.5 hp with all fixing as per the direction of Engineer in charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). 50 x 125 mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive Strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 35 M THICK

Providing of reception counter

Side Table 1500*750*750mm with 3 drawer

Reception Chairs

Bench (Stainless Steel) for blind

Mess Table for disabled

FOLIAGE/SHADE LOVING PLANTS /SUMMER PLANTS

Providing of Aglaonema Parrot Jungle plant (three in one), having ht. 30 cm and above with 20 to 25 leaves, well developed, fresh & healthy in 25 cm size of Earthen pot / Plastic pot.

Providing of Aglaonema dove variety Plant, having ht. 30 cm to 45 cm with 8 to 10 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot

Providing of Aglaonema nitida plant, having ht. 30 cm to 45 cm with 8 to 10 leaves, well developed, fersh and healthy with attractive leaves in 25 cm size of Earthen pot / Plastic pot

Providing of Araucaria cookii plant, having ht.1.20 m to 1.35 m, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 25 cm size of Earthen pot / Plastic pot.

Providing of Araucaria cookii plant, having ht.1.80m to 1.95 m, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 30cm size of Earthen pot / Plastic pot.

Providing of Areca Palm plant, having ht. 1.80 m to 2.10 m with 8 to 10 suckers, well developed, fresh and healthy with lush green foliage in 30 cm size of Earthen pot / Plastic pot.

Providing of Areca Palm plant, having ht. 2.40 m to 2.70 m with 12 to 14 suckers, well developed, fresh and healthy with lush green foliage in 35 cm size of Bucket type cement pots.

Providing of Croton petra Bangalore variety plant, having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colourfull leaves in 25 cm size of Earthen pot / Plastic pot

Providing of Speciman Croton Petra Banglore variety plant, having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh & healthy foliage approximately 60-65 leaves in 30 cm size of Earthen pot / Plastic pot.

Providing of Philodendron Envy plant, mounted on moss stick 90 cm ht., well developed with full of fresh & healthy leaves in 30 cm size of Earthen pot / Plastic pot

WINTER SEASONAL PLANTS

Providing Plant Antirrhinum Hybrid dwarf variety, specimen (8-10 plants) with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/Challi Pot

Providing of Araucaria cookii plant, having ht.1.20 m to 1.35 m, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 25 cm size of Earthen pot / Plastic pot.

Providing Plant Cyclemen hybrid variety specimen 5-6 plants fresh & healthy in full bloom well developed in 35 cm Earthen Tray/ Nand

Providing Plant Helianthus different colour with full bloom (3 in one) fresh & healthy in 25 cm Earthen Pot/Plastic Pot

Providing Plant Impatiens in different colour well developed fresh and healthy (3 in one) well bloomed in 25 cm Earthen Pot/Plastic Pot

Providing Plant Poincettia dwarf multi head, having upto 30 cm ht., with 3 to 4 branches with fully different coloured top with fresh & healthy foliage well developed in 20 cm Earthen Pot/Plastic Pot.

Providing Plant Primula Hybrid variety specimen 5-6 plants in each Pot with fresh & healthy foliage in full bloom different colour well developed in 35 cm Earthen Tray/ Nand

SUMMER & RAINY SEASONAL PLANTS

Providing and Displaying Caladium Hybrid variety 3 to 4 in a pot well developed with fresh & healthy foliage 30 to 45 cm ht. in different colour 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying Gaillardia double hybrid variety well developed 30 to 45 cm ht 20 to 30 fresh & healthy flower with green painted bamboo stick in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying Sunflower single well developed 8 to 10 half bloom buds multi branched in fresh & healthy full stacked with green painted bamboo stick stacking in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge

Providing and stacking of plant Mogra of height 25 to 30 cm., 2 to 3 branch in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge

Rose Plant

Providing and Displaying Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cmEarthen Pot, as per direction of the officer-in-charge.

Providing and Displaying Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.

ORNAMENTAL PLANT

Adenium Obesum well developed with fresh & healthy 4 to 5 branch 60 to 75 cm ht. plant in 40 cm size Earthen Pot/ Plastic Pot

Bamboo Buddha valley with fresh & healthy 3 to 4 suckers having 75 to 90 cm ht. plant in 25 cm size Earthen Pot/ Plastic Pot

Buddha vally variety with umbrella shape plant having 120 to 135 ht. plant with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy plant

Bamboo Buddha Valley with fresh & healthy 5 to 6 suckers 1.80 m to 2.10m ht umbrella type plant well developed in 50 cm Cement Pot

Cycus circinallis well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot

Cycus revoluta in 35 cm challi, specimen plant, having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed

Cycus revoluta specimen plant, having 45 to 50 fresh and healthy, leaves having 30cm to 35cm circumfrance of base stem well developed in 40 cm challi

GROUND COVERS PLANTS

Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Euphorbia milli hybrid variety, having ht.30 cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in 20 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge

Providing and stacking of Euphorbia milli hybrid variety, having ht. 30 cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in 30 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge..

Providing and stacking of Syngonium miniature dwarf, having height 30-45 cm. with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge.

Providing and stacking of Tradescantia, full of leaves in Earthen Pot/Plastic Pot of size 15 cm. as per direction of the officer-in-charge

TREE PLANTS

Providing and stacking of Bottle palm of ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bags.

Providing and stacking of Bottle palm of ht. 270-300 cm bottom girth 40-50 cm well developed in big HDPE bags as per direction of the officer-in-charge

Providing and stacking of Cassia javanica of height 120-150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Ficus nuda of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge

Providing and stacking of Fishtail palm of ht. 210-240 cm bottom girth 25- 30 cm well developed in big size HDPE bags as per direction of the officer-in-charge.

Providing and stacking of Fishtail palm of ht. 270-300 cm bottom girth 40- 50 cm well developed in big size HDPE bags as per direction of the officer-in-charge

Providing and stacking of Foxtail palm of ht. 240-270 cm bottom girth 35- 40 cm well developed in big size HDPE bags as per direction of the officer-in-charge

Providing and stacking of Pinus longifolia (Pinus) of height 90-105 cm. in cement pots of size 35 cm as per direction of the officer-in-charge.

Providing and stacking of Saraca indica (Sita Ashok) of height 105-120 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge

Providing and stacking of Washingtonia filifea palm stem ht. 120-135 cm with 8-10 healthy leaves lush green leaves well developed in big size HDPE Bags as per direction of the officer-in-charge

SHRUBS

Providing and stacking of Calliandra hybrida of height 105-120 cm., well branched, bushy in big size HDPE bag as per direction of the officer-in-charge.

Providing and stacking of Dombeya mastersii of height 60-75 cm. with 4- 5 branches in bag of size 25 cm as per direction of the officer-in-charge

Providing and stacking of Ficus panda of height 60-90 cm, with 8-10 branches, and healthy foliage, bushy in big size HDPE bag as per direction of the officer-in-charge

Providing and stacking of Hibiscus variegated of height 60-75 cm. with 8- 10 branches and healthy variegated foliage in cement pots of size 35 cm as per direction of the officer-in-charge

Providing and stacking of Mussaenda erythrophylla (Rosea) of height 60- 75 cm. multi branched in earthen pots of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Tecoma gaudichaudi of height 90-105 cm.,bushy in big size HDPE bag as per direction of the officer-in-charge.

CREEPER PLANTS

Providing and stacking of Bignonia venusta (Golden shower) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per directionM of the officer-in-charge.

Providing and stacking of Passiflora caerulea (Rakhi bel) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge

Providing and stacking of Tecoma grandiflora of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge

ANNUAL FLOWER SEEDLINGS/CUTTINGS Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge.

Alyssum

Brachycome

Carnation hybrid

Daisy hybrid

Gazania hybrid

Marigold French Hybrid dwarf

Phlox mix colour hybrid

Verbena hybrid

Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge.

Balsam seedling

Cosmos hybrid

Gomphrena

Portulaca hybrid

Sunflower Dwarf

GRASS IN LAWN

Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (the good earth shall be paid for separately

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge

Providing Supply & fixing of Spray Pop-up sprinkler 4'' height with Replacable nozzle of radius 3 to 5 m @ 2.1 bar, Q-0.12 to 0.30lps (for full circle) with SAM

Providing & fixing of Drip Irigation 16 mm round cylindrical woth all complete fixing as per the direction of Engineer in charge.

Surveillance and other

Providing & fixing of Electric SN Light Vehicle Golf Cart 4 seater 20 to 30km/hr FRP Polished 2400 x1500x1800 mm with all complete as per the direction of Engineer in charge.

Providing & fixing of Electric ChargingStation 3.3 KW 3 PIN SINGLE SOCKET With all complete as per the direction of Engineer in charge.

SITC of Speed Dome PTZ Camera ¼” Sony Super HAD CCD, 27x IR Speed Dome Camera, 700 TVL, ICR, IP66 (Bracket & Power Supply included), IR Range : 100 Mtrs.,

SITC of IR DOME/ BULLET CCTV Camera with cabling .

SITC of 8 Channel DVR for CCTV Camera with 2 TB Survilance SATA Hard Disk .

SITC of 25" Led Monitor for CCTV Setup .

Transportation Charges of drilling equipment including assembly and other material as required.

Drilling of 450 to 675 mm dia by rotary machine

Supply & laying of 300mm dia M.S housing pipe (7.2 mm thick

Supply & laying of 200mm dia M.S blind pipe (7.2 mm thick)

Supply & laying of 200mm dia M.S slotted pipe (7.2 mm thick)

Supply & fixing of 300mm dia M.S Ring

Supply & fixing of 200mm dia M.S Ring

Supply & fixing Bail plug 200 mm dia M.S.

Supply & fixing Well Cap 300 mm dia M.S.

Supply & fixing Reduser 300 x 200 mm dia M.S.

Supply & fixing Housing clamp 300 mm dia M.S,

Supply & filing of Pee gravel 1.6 mm to 2 mm in side of bore after lower and development as required as per direction of E/I.

Development by air compressor including transportation.

Development by O.P unit including transportation.

Well logging charges

PUMPING SET KSB make submersible pump set suitable for installation in bore well of min 150 mm inner dia preferably more and having under noted specifications. TYPE UQD 182/10 + 6 UMA I/H 150/22(S/D)+5 .00HP Capacity 1400LPH Total Head 92M No of stages 6 Max OD of the pump set 150mm size of discharges out let 3” Speed in RPM 2900 RPM H. P. of Motor 5.5 KW/ 7.5 HP Method of starting star delta supply of voltage 400 V + 3% 3 phase The pumping set shall be comprise ( a ) Built in non-return valve ( b ) Six stages bowl assembly with bronze impellers and S. S. impeller shaft etc. ( c ) 7.5 HP 2900 RPM sub mersible electric motor suitable for Star/Delta starting with 3RM cable 2 x 3 x 4 sq mm

Supply and fixing of finolex of copper cable ISI marked submersible cable of size 1 x 3 x 4 sq mm

Supply of 80mm dia M.S. column pipe of class 'C' both and socketed with heavy sockets in 3/6 meter length and one end flanged complete with interlocking arrangements.

Supply of 80mm dia M.S.column pipe clamps with nut bolts packing etc.

Supply of 80mm dia C.I. double flanged ISI mark reflex valve of upadhya or equ. Make

Supply of 80mm dia C.I. double flanged ISI mark sluice valve with hand wheel of upadhya or equ. Make.

Supply of C.I. double flanged bend of 80 mm dia i/c cost of material and labour.

Supply of 80mm dia C.I. tee heavy quality i/c cost of material.

Supply of Guru/Fiibing or equivalent make pressure gauge.

Erection & commissioning of pumping plants comp along with electric wiring.

Supply of steel wire rope of 1/2" size

S/B of 600 mm x 600 MM x 6.0mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead on one no. 8 to 10 SWG GI wite in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. , pipe and G.I. wire will be extra ) 30 cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of E/I complete in all respects as per drawing.

S/F of one number 8 to 6 SWG G.I. Wire in 15mm dia G.I. Pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand labour. T&P other material required for proper completion of the work as directed at site.

Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thik suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.

S&F of 63 A. 415 V Metal clad TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect.

Supply and fixing of twin unit aviation obstruction light (GEC-ZH 752) / Bajaj BJAOL-2 with red glass, B.C. holders etc. complete in all respects, at the top of the building complete in all respect.`

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 25A TPN

Supply and Wiring of submains with 4 nos. of 4 sq. mm.FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge.

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm 4 core

50sqmm 3.5 core

63 Amp 4 Pole MCB (9/10KVA)

S&F of 200 A. 415 V Metal clad TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect.

S&F of 200 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.

SUBHEAD I- WIRING POINTS Wiring points for light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as

earth continuity wire and piano type switch etc. complete in all respects.

Same as item No.(1) but for fan and light duty exhaust fan.

Same as item No.(1) but for 5 Amp plug point

Same as item No.(1) but for call bell point

Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.

Supply and wiring of submain 2 number 6 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 4 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.

Supply and wiring of submain 4 number 10 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 32mm dia PVC conduit along with two numbers 6 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.

Supply and wiring of submain 4 number 16 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 40mm dia PVC conduit along with two numbers 10 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.

Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work . (for Telephone points)

SUBHEAD II-INSTALLATION OF LIGHT FIXTURES AND FANS

Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.

Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.

S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work.

Supply fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.

Supply & fixing of single wall light bracket made of brass on matching polished MDFEG board brass including connection etc. as required.

Supply & fixing of factory wired HPF box type flourescent tube light fitting suitable for following fluorescent tube including tubes etc. complete as required. 1x40 Watt.

SUBHEAD III-DISTIBUTION BOARD

Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work. 600x480x200 mm. size

Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work. 600x480x200 mm. size

Supply and fixing of flush/surface mounting distribution boards (Legrand Lexic) without MCB with additional metal door complete in all respects. 6 Way TPN [CAT-B]

Supply and fixing of 240 volts 'L' series miniature circuit breaker 6 Amp. To 32 Amp. (10 K A ) in existing MCB, DB complete with connections as required. 6 - 32 amps. [CAT B]

Supply fixing and making connection of following MCBS complete in all respects as per direction and satisfaction of engineer-in-charge. 40 Amp. 4P MCB (10 KA) [CAT B]

Supply fixing and making connection of following MCBS complete in all respects as per direction and satisfaction of engineer-in-charge. 63 Amp. 4P MCB (10 KA) [CAT B]

Supply and fixing of power plug with 15A/250 V flush type switch and 5 Pin 15 A/250V flush type universal socket in suitable M.S. box of 175mmx100x50mm size with phenolic laminated bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer.

Supply & fixing of Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respects as per direction and satisfaction of engineer-in-charge. [CAT-B]

Supply and fixing Single Pole MCBS Blanking Plate complete in all respects.

SUBHEAD IV-EARTHING SYSTEM

Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm diaG.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respects.

Supply and fixing of two number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of work as directed at side.

SUBHEAD V-CABLES

Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size.as per direction of Engineer-Incharge.complete in all respect The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 50 sqmm 3.5 core

Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 50 sqmm 3.5 core

Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. 50 Sq.mm

Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. 25 Sq.mm

Supply and fixing of 1200 mm ceiling exhaust fan with fan motor of AC Permanent insulation capaciotr rating confirming BEE 5 star rating and IS 374-79 And also compite V,50HZ ,I-PH AC the fan assemble should ensists of down rod blades shackle canopies etc. and with double bearing system.

Supply and fixing of LED Tube Light with batten suitable for up to 2 X 22 watt LED tube light fitting including tube on Surface complete in all respect.

Supply and fixing of Single LED light wall bracket 3 to 6 Watt on matching M.D.F.E.G Board base etc. complete in all respect.

S/F MODULAR BOXES, BASE & COVER PLATE :-

Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (100mm X 100mm)

Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect.

Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.

Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect.

Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. complete in all respect.

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect.

Supply and laying of 32mm x 6mm copper strip from earth electrode directly in the ground as required complete in all respect.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 300 mm dia

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 200 mm dia (OD-200 mm & ID-175 mm nominal)

Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. 120 sq. mm 3 core

supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 120 sq. mm

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 120 sq. mm

Providing and fixing of 100 LED Solar Light outdoor Solar Lamp PIR Motion Sensor Water Proof Solar Sunlight Powered with all fixing as per the direction of Engineer in charge.

Providing and fixing of Solar LED Pole 50 W Light with all fixing as per the direction of Engineer in charge.

a)-Solar Module Multi-crystalline (305 Wp) Make Renesola Solar/Vikram/Canadian or equivalent (MNRE Approved)-748 Nos (b)-Power Conditioning Unit 120 V with MPPT controller 3 phase supporting DC input of 5.5 KWp Environmental Testing Efficiency Measurements Environmental Testing TEC 60068-3 (12,14,30)/Equivalent BIS Std. IEC 61683/1S 61683 IEC 60068-2 (1.2, 14, 30)/Equivalent BIS Sid Make: Power-One/SMA/Schinder/Delta or equivalent (MNRE Approved) (e)-Batteries With Assessories Frame (12V or 2 Vor as per System Design) Maintainance free gel VRLA Bateries with 5 year warranty General Requirements & Methods of Testing Tobular Icad Acid/VRLA/ GEL Capacity Test Charge/Discharge Efficiency Self-Discharge As per relevant BIS Std. MAke: HBL/EXIDE or equivalent (MNRE Approved) (d)-Array Junction Boxes 120V 10 Input I Out with fuse & protection IP 54(for outdoor)/ IP 21(for indoor) as per IEC 529 A DC distribution box shall be mounted close to the solar inverter. The DC distribution box shall be of the thermo-plastic IP65 DIN-rail mounting type and shall comprise the following components and cable terminations -Incoming positive and negative DC cables from the DC Combiner Box -DC circuit breaker, 2 pole (the cables from the DC Combiner Box will be connected to this circuit breaker on the incoming side) Make: As per PWD Approved Charges Exina) (2) LT Panel to Weightffridge/Checkp 10 sqmm X2 core) Maker As per PWD Approvedt Charges Fixtiral (3) LT Panel to Pump House (26 sqm X 4 core)) Make: As per PWD Approved Charges

supply and taying of aluminum conductor PVC itulated armored, served, shealed cable 1100 Vols grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand al round and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be property connected with the earth conductor by clamps (1)) 10 sqmm X 2 core (SINO-501 b)

supply and taying of aluminum conductor PVC itulated armored, served, shealed cable 1100 Vols grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand al round and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be property connected with the earth conductor by clamps elu 2) 16 sqmm X 4 core (SINO-5011)

supply and taying of aluminum conductor PVC itulated armored, served, shealed cable 1100 Vols grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand al round and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be property connected with the earth conductor by clamps elu (3) 185 sqmm X 3.3 core (SI NO-501 ) labour T&P painting and other material required for proper completion of the work as per direction) and satisfaction, of E/L

S/E changeover switch inculding the cost of labour T&P Painting and other material required for propwer completion of te work a sper the direction and satisfaction of E/I a) 400 A Four Pole (SI NO-381) (angle iron frame size 5mmx50mmx6mm)

100A FOUR POLE (angle iron frame size 40mmx40mmx6mm)

63A FOUR POLE (angle iron frame size 40mmx40mmx6mm)

PART-B Operation and Annual Comprehensive Maintainance for 5 years (At the rate of 2% of the Solar PV Project Cost mentioned in item number I of PART A

MAKING, SUPPLY, LAMINATION, PASTING & INSTALLATION OF SIGNAGE BOARDS @ Rs. 15200/ sqm. (MR)Tactile board acrylic Material With all complete as per the direcion of Engineer in charge.

Supply and fixng of Dusbin fabric with all complete fixing as per the direction of Engineer in charge.

Supply and fixng of kaleidoscope with all complete fixing as per the direction of Engineer in charge.

Supply and Fixing of a Swing. -3" GI Pipe having Wall thickness of 3.2 MM and 89 MM OD. 3" OD Pipe - Top Pole GI Pipe 3" OD with the wall thickness of 3.2 MM. Nest Swing - 1000MM OD 4 hooks, netted with armed rope, Rope and Hook as per the specifications . Foundation of 300 MM (depth) X 450 MM X 450 MM concrete block embedded. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of wheel chair swing 3"Pipe - A Swing. - GI Pipe Wall thickness of 3.2 MM and 89 MM OD . Swing Portion - 42/33 MM OD pipe with wall thickness 2.5MM. 5 MM Aluminium Checkered sheets base, Armed Rope of nylon with the metal threads. Weight holding capacity of 180 Kgs. Foundation of 300 MM (depth) X 450 MM X 450 MM concrete block embedded. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of a 3"Pipe - A Swing 4 seater Special seat. - GI Pipe Wall thickness of 3.2 MM and 89 MM OD. 3" OD Pipe - Top Pole GI Pipe89 MM OD with the wall thickness of 3.2 MM. Swing Seat - weight holding capacity of 200 kgs per seat, armed Rope and Hook as per the specifications ( Imported from Europe having all the safety certifications ). Foundation of 300 MM (depth) X 450 MM X 450 MM concrete block embedded. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of a 8' Merry Go Round - Wheel Chair Accessible made of 60/42/33mm OD Jindal GI Pipe for Slide railings, 114mm OD in the centre with HDPE sheet (10/19mm thickness) 300 MM - 350 MM steering with the metal frame ( Depending on the product strength / utility and durability ) Aluminium checkered sheet 2.5mm thickness,Base will be made of MS Square pipe of 40 MM with Angle of 40 MM, Fully closed bearing - tapered and ball bearingsupported by additional 8/10 wheels for smooth rotation. Armed Rope (6 metal wires inside) for locking mechanism. SS nuts and bolts will be used. Weight holding capacity of 800 kgs. Concrete bed below the surface for holding the base mechanism with holes for water drainage. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of a Roller Bed 33 OD MM GI Pipe for top arch handles, 6 MM Sheet MS thickness with 150 MM width 3900 MM length side support ,42 OD MM GI Pipe for rolling pins on 33 MM OD GI Pipe, 33 MM OD GI Pipe for sheet frame. 3 MM MS sheet of 900 MM X 600 MM end and start part ,60MM OD GI Pipe for foundation, SS Fasteners. Anchor fasteners mount on the concrete bed. Weight holding capacity of 300 kgs. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of a MOLDO FLEXLIFE Ultra Cushion Sports Flooring System (8+2=10mm) : Supply and application of Elastic Poly Uterine Rebounded Form (EPRF) Rolls of density 150 Kg per Cubic Meter for Kids Play Areas, Kindergarten Schools, Water Parks (Thickness : 8 mm); fixed with acrylic concrete adhesive on recommended concrete surface for high cushion and intense shock absorbance. On top of EPRF Sheets following layer system are applied - Hybrid Polyester Fabric Reinforcement - Hybrid Water born Flexible cushion (4- Layers) - Full PU Colored Top Coat (2- layers) with game line marking to protect flooring against UV Rays . The Proposed system provides high durablity , required minimal maintenance , All weather suitable / friendly, ecco-friendly , Protective Against UV rays and available in Multi-color options . complete to the satisfaction of engineer in charge.

Supply & fixing of Synthetic flooring in Basket ball Court 6 layer 3mm in thickness density 1.73 gm/cm3 with all complete as per the direcion of Engineer in charge.

Supply and Fixing of a 5 seater see-saw made of 10 MM thickness HDPE sheets used in handles, top bed and sides on MS square pipes ,Spring & Bearing for the easy movement ,Handle for support,42 MM OD BASE FRAME rectangular Pipe 75X75X2mm for the Seesaw. Weight holding capacity of 200 kgs. Anchor fasteners mount on the concrete bed. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns. complete to the satisfaction of engineer in charge.

Supply and Fixing of a The Butterfly Game Activity Station has a great combination of sensory, tactile, fun activities and puzzles to keep children entertained and engaged. Featuring a Mini Make it Rain, Tile Slide Butterfly puzzle, Maze Slider, Flower Explorer activity, 3 in a Row game, four colour tinted porthole windows and a metamorphosis activity where you flip the discs around to show the different states of 4 different creatures, like the butterfly which metamorphosis's from a chrysalis to the butterfly. All wrapped up in an eye-catching focal point in your play space. Ideal for outdoor playgrounds, shopping malls, indoor play centres, showrooms, shops and stores. Activity stations are compact units that are supplied with all the parts ready for you to assemble, and with the brackets to attach to your surface if required. Made from tough, durable, and safe HDPE which does not rot, split or delaminate. BS EN 1176 - Designed to British & European Standards. Anchor fasteners mount on the concrete bed. complete to the satisfaction of engineer in charge.

Supply and Fixing of a 3 feet height LLDPE slide which is made by rotational moulding process, 10 mm thickness HDPE Sheets is used to make the shape of Giraffe on both side, Girrafe ladder steps are made of HDPE sheet having thickness of 10mm fixed on 50 X 25mm rectangular Pipe frame for the Slide. Weight holding capacity of 100 kgs.All the metal items. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of a 89 MM OD Pipe - A Swing. - Jindal GI Pipe Wall thickness of 3.2 MM and 89 MM OD, 3" OD Pipe - Top Pole Jindal GI Pipe 89 MM OD with the wall thickness of 3.2 MM, 33 OD metal frame to hold the chain and combo seats,Seats of rubber with metal plate inside for the adult with weighing capacity of 200 kgs,Seat of rubber with chain for the baby with the weighing capacity of 25 kgs,Metallic chain with PVC/Rubber coating. Foundation of 300 MM (depth) X 450 MM X 450 MM concrete block embedded. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of a 3 seater spring rider with different shapes is made of 10 MM thickness HDPE sheets with metallic frame,89 MM OD GI Pipe for the see saw frame,33 MM OD GI Pipe for the handle and foot rest,3 Springs for the easy movement. Weight holding capacity of 100 kgs. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of a Rainbow arch 33 MM OD Jindal GI Pipe for the arch pipe 3 Nos, DISC 10 MM HDPE sheet as per the size of the ARCH. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of a Monkey bar wheel chair accessible made of 42mm OD Jindal GI Pipe for the main frame, 33mm OD Jindal GI Pipe for the handles and side support, SS nuts and bolts are used in the product.All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns. .complete to the satisfaction of engineer in charge.

Supply and Fixing of a Push Hand Wheels made of 114 MM OD Jindal GI Pipe, 42/33 MM OD Jindal GI Pipe for steering wheel and steering wheel support with ball-bearing inside for circular movement. 2 different height to make it wheel chair accesible. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns complete to the satisfaction of engineer in charge.

Supply and Fixing of aLOOP DISCS is made of 89 MM OD Jindal GI Pipe for Side main Post,42 MM OD Jindal GI Pipe for loop ,Disc for movement on loop is made of 10 MM thickness HDPE Sheet. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of a Playnetics Music Ball 28 Kgs. All Playnetic products are 100% Human Powered. The user generates the energy. There is no need for external electricity or batteries.All Playnetic products enhance the playing experience through beautiful audio design.All Playnetic products are weather resistant.Several Playnetic products have a removable USB stick with .mp3 audio files. This allows for easy customization and new content.All Playnetic products use .mp3 coding format. This is a universally used file format for audio. It allows for easy customization and content creation. To use only the USB of playnetics otherwise the mechnism will get spoiled.complete to the satisfaction of engineer in charge.

Supply and Fixing of a 800 MM X 685 MM Puzzle game having thickness of 10mm/19mm HDPE Sheet with metallic frame. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of a Rock Paper and Scissor Panel Game having size of 800 MM X 685 MM is made of HDPE Sheet having thickness of 10mm with Mild Steel metallic frame made of 50 x 25 x 1.5mm thickness. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of a LLDPE climbing holder with anchor fasteners weight holding capacity of 80 kgs per holdercomplete to the satisfaction of engineer in charge.

Supply and Fixing of a Climbing net is made of 60 MM OD GI pipe is used for outer frame. 16 MM armed rope european quality with 6 steel cables inside fixed with various aluminium connectors is used for climbing activity. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of a Roller Slide is made of 5 MM M.S. Sheet on both sides with 150 MM side width with customized length as per requirement. 42 MM dia M.S. bush pipe for rollers will be used, 33 MM OD Jindal GI Pipe for sheet frame. All the items would be pure polyester powder coated with dry thickness of 50-70 microns. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of a slide will be made of LLDPE virgin material made through rotational moulding process. The height of this product can be customised as it would be given in different pieces combining together to make a slide. This slide can be given in 1 color or multi color. All the nuts and bolts will be fixed on lower side of the slide. The slide would be having no sharp edges and made with Anti static material and UV stabilised colors.complete to the satisfaction of engineer in charge.

Supply and Fixing of a Rope Climbers is made of 60 MM OD frame GI Pipe on top, 16 MM armed rope european quality (with 6 steel wires inside) with aluminium connectors will be fixed with top pipe for children to use climbing activity. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of a Platform Sea Saw is made of 60 MM OD frame on top, 16 MM armed rope european quality (with 6 steel wires inside) with aluminium connectors will be fixed with top pipe for children to use climbing activity. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of a 4 Seater MGR is made of 60 MM OD frame on top, 16 MM armed rope european quality (with 6 steel wires inside) with aluminium connectors will be fixed with top pipe for children to use climbing activity. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of a Leg and ARM Rotator is made of 60 MM OD GI pipe is used for outer frame. 16 MM armed rope european quality with 6 steel cables inside fixed with various aluminium connectors is used for climbing activity. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of a Multi Play Station is made of 60 MM OD GI pipe is used for outer frame. 16 MM armed rope european quality with 6 steel cables inside fixed with various aluminium connectors is used for climbing activity. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer in charge.

Supply and Fixing of a 500 MM dia 20 MM round rod,6 MM net of nylon/PPcomplete to the satisfaction of engineer in charge.

Supply & fixing of Rubber Antishock Gym Tile with all complete as per the direction of Enginer in charge.

Supply and fixing of FRP 3 Seater Benches with Cast iron frame with all fixng as per the direction of Engineer in charge.

Providing and fixing of Mangalore tiles with wirh rdiges with all complete fixing as per the direction of Engineer in charge.

Providng and fixing of Bamboos with all fixing as per the direction of Engineer in charge.

Providng and fixing of Ballies with all fixing as per the direction of Engineer in charge.

OPTIONAL ITEM

Providing Supply and fixing of Cricket Net Practice with all fixing as per the direction of Engineer in charge.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.

Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. inbase of:

Providing Supply of Badminton Racket , ,BASKET BALL, ,SKATING, FOOTBALL ETC FOR STORE with all fixing as per the direction of Engineer in charge.

Providing Supply & fixng of Tensile Fabric for Shed Structure 760 GSM PVDF Coating with FR WITH all complete fixing as per the direction of Engineer in charge.

Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied@ 2.20kg/10 sqm

Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge.Prestigious works / Rajpath/C Hexagon (1Mali for 1.00Acre)

Complete maintenance of trees (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department and other T & P material/articles shall be provided by the contractor) and as per direction of officer in charge.Trees for 250 no/(up to 4 & up to 3 year Slow & Fast Per Plant/ growing group)

Complete maintenance of shrubs (Out side garden features), jobs like makingof basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by Per Plant/ the department) and as per direction of officer in charge