Loading
Loading…
Loading…
Tender Value
₹1.2 Cr
EMD Value
₹2.5 L
Closing Date
22 Jul 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
SR.DEN/III
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity.(b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Defination of Similar Work :- Any Civil work other than track work.
7 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer may please note that offers received without requisite/mandatory documents as mentioned above, will be considered as invalid tender and for which contractor shall have no claim on Railway.
The tenderer shall visit the site of work and acquaint himself/themselves with the conditions of work viz. approach roads and accessibility, availability of materials, electric power, water for work and drinking purposes, site for labour camps, stores, godowns, extent of lead/lift in work, availability of skilled and unskilled labour etc. that may be encountered in the course of execution of work. In short, he/they should familiarize himself/themselves fully with the all the conditions of the work site & all the financial implications due to the above conditions is deemed to be understood and taken care of while bidding the offer.
Annual Zone work for P.E 30.06.2027 maintenance of staff Qtr and service building in the section of SSE/W/NDLS/Line under ADEN/NDLS.
NIT-32-2026-27-W-III~NR
NIT-32-2026-27-W-III
Open
Works - General
12 Months
Delhi
₹0
₹2.5 L
22 Jul 2026
25 Jun 2026
8 Jul 2026
91 items across 2 schedules · ₹51,87,146.58 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. | cum | 200 | 411.3 | 82,260 |
| 2 | All kinds of soil | cum | 100 | 205.45 | 20,545 |
| 3 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 20 | 7,365.15 | 1,47,303 |
| 4 | Foundations, footings, bases for columns | Sqm | 80 | 307.95 | 24,636 |
| 5 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 20 | 8,364.2 | 1,67,284 |
| 6 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 20 | 10,185.05 | 2,03,701 |
| 7 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 50 | 307.95 | 15,397.5 |
| 8 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 1000 | 89.65 | 89,650 |
| 9 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 60 | 6,882 | 4,12,920 |
| 10 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 60 | 8,288.35 | 4,97,301 |
| 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 100 | 1,063.45 | 1,06,345 |
| 12 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi- metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. | Sqm | 40 | 4,474.2 | 1,78,968 |
| 13 | Second class teak wood | cum | 2 | 1,31,576.95 | 2,63,153.9 |
| 14 | 35 mm thick shutters | Sqm | 3 | 3,704.45 | 11,113.35 |
| 15 | Hot finished seamless type tubes | Kg | 8000 | 168.95 | 13,51,600 |
| 16 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 500 | 142.3 | 71,150 |
| 17 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 100 | 612.25 | 61,225 |
| 18 | 25 mm thick | Sqm | 20 | 1,706.6 | 34,132 |
| 19 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. | Sqm | 150 | 1,142.8 | 1,71,420 |
| 20 | Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: | Sqm | 400 | 3,282.5 | 13,13,000 |
| 21 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 40 | 3,908.8 | 1,56,352 |
| 22 | In 75x75 mm deep chase | Metre | 100 | 260.2 | 26,020 |
| 23 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. | Each | 20 | 266.6 | 5,332 |
| 24 | 40 to 50 mm thick | Sqm | 400 | 907.95 | 3,63,180 |
| 25 | 110 mm diameter | Metre | 60 | 319.75 | 19,185 |
| 26 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 100 | 671.55 | 67,155 |
| 27 | GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. | Sqm | 100 | 1,591.7 | 1,59,170 |
| 28 | 1:4 (1 cement: 4 fine sand) | Sqm | 100 | 339.7 | 33,970 |
| 29 | Ordinary cement finish using ordinary cement | Sqm | 100 | 752.4 | 75,240 |
| 30 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 500 | 214.3 | 1,07,150 |
| 31 | New work (two or more coats) over and including water thinnable priming coat with cement primer | Sqm | 2500 | 162.55 | 4,06,375 |
| 32 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 4000 | 97.6 | 3,90,400 |
| 33 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 2000 | 158.95 | 3,17,900 |
| 34 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 20 | 2,928.1 | 58,562 |
| 35 | Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. | cum | 20 | 2,619.45 | 52,389 |
| 36 | In cement mortar | cum | 20 | 1,698.45 | 33,969 |
| 37 | From brick work in cement mortar | 1000 Nos. | 500 | 5,522.25 | 2,761.13 |
| 38 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 5 | 5,781.35 | 28,906.75 |
| 39 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 5 | 5,540.55 | 27,702.75 |
| 40 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 5 | 5,268.85 | 26,344.25 |
| 41 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | Each | 5 | 1,913.75 | 9,568.75 |
| 42 | White glazed fire clay kitchen sink of size 600x450x 250 mm | Each | 5 | 3,302.95 | 16,514.75 |
| 43 | Flat back wash basin of size 550x400 mm | Each | 5 | 915.45 | 4,577.25 |
| 44 | 32 mm dia | Each | 5 | 90.95 | 454.75 |
| 45 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | Each | 5 | 45.25 | 226.25 |
| 46 | Rectangular shape 453x357 mm | Each | 5 | 1,158.95 | 5,794.75 |
| 47 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 | Metre | 5 | 1,077.4 | 5,387 |
| 48 | Sand cast iron S&S as per IS - 1729 | Each | 5 | 530.7 | 2,653.5 |
| 49 | 100 mm dia | Metre | 20 | 615.7 | 12,314 |
| 50 | 15 mm dia nominal bore | Metre | 50 | 304.15 | 15,207.5 |
| 51 | 15 mm nominal bore | Each | 20 | 262.3 | 5,246 |
| 52 | 15mm nominal bore | Each | 10 | 500.35 | 5,003.5 |
| 53 | 15 mm nominal bore, 122mm long, weighing not less than 99 gms | Each | 10 | 143.3 | 1,433 |
| 54 | 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms | Each | 10 | 194.15 | 1,941.5 |
| 55 | 450 mm dia. R.C.C. pipe | Metre | 200 | 1,481.55 | 2,96,310 |
| 56 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) | cum | 10 | 7,510.75 | 75,107.5 |
| 57 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self- priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. | Sqm | 200 | 474.15 | 94,830 |
| 58 | With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles | Sqm | 30 | 2,055.65 | 61,669.5 |
| 59 | Stirrer mixed cementitious grout (non shrink) of approved make in dowel tubes / Shear keys / Joints of precast members. | Kg | 800 | 76.7 | 61,360 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
StandardTenderDocument2022R5.pdf
ATTACHMENT
Annexure-I.pdf
ATTACHMENT
GCC-2022withCSupto11.pdf
ATTACHMENT
Annexure-II.pdf
ATTACHMENT
GCC-2022withCSupto10.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .