COMPREHENSIVE MAINT TO REPAIR/REPLACEMENT OF INTERNAL ELECTRIFICATION AND CONNECTED WORKS IN ZONE-I/II/III/IV/V/VI UNDER AGE E/M OF GE (SOUTH) MEERUT CANTT

Amount

Taking down carefully copper/aluminium point wiring of any type, batten or conduit, (Light, Fan, Socket switch or power) complete incl fittings and making good the disturbed surfaces of walls, ceiling etc in cm and applying two coats of white/colour washing/distempering etc to match the existing surface complete all as specified and direcred.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in existing PVC / MS concealed conduit or connecting through new caping casing of any size/dia as per requirement complete with all accessories / fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete including chase cutting all as specified and directed for One light point / Bell point / fan point controlled by one, one way normal piano/ modular switch 05 / 06 Amps.

All as per item No 2.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps normal piano / modular switch. Complete all as specified and direcred.

All as per item No 2.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps normal piano / modular switch. Complete all as specified and direcred.

All as per item No 2.00 here -in- before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15/16 Amps normal piano / modular socket outlet point on independent board. Complete all as specified and direcred.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point /fan point/ bell point controlled by one, one way normal piano/ modular switch 05 / 06 Amps.

All as per item No 6.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps normal piano / modular switch. Complete all as specified and direcred.

All as per item No 6.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps normal piano / modular switch. Complete all as specified and direcred.

All as per item No 8.00 here -in- before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps normal piano / modular socket outlet point on independent board. Complete all as specified and direcred.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts Complete all as specified & directed.

All as per item No 10.00 here -in- before but socket outlet 3 pin, 05 / 06 Amps flush type 240 volts. Complete all as specified & directed.

All as per item No 10.00 here -in- before but switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed.

All as per item No 10.00 here -in- before but socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed.

All as per item No 10.00 here -in- before but switch bell push flush type , 5 amps , 240 volts complete all as specified & directed.

All as per item No 10.00 here -in- before but door bell ding dong type , 240 volts complete all as specified & directed.

All as per item No 10.00 here -in- before but steped / Socket type electronic fan regulator flush type AC, 230 volts as per site requirement complete all as specified & directed.

Supply & fixing of ceiling rose, 3 terminal /PVC/polycarbonate isolated body complete all as specified & directed.

All as per item No 17.00 here -in- before but lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified & directed.

Supply and fixing in repair LED security light fitting 1x45 Watt luminaries with die cast aluminium housing comprising epoxy powder coated enclosed with glass coverembedded lens in frame with high power LED white lamp type of capacity 45 watt complete all as specified and directed.

All as per item No 19.00 here -in- before but capacity 25/30 watt complete all as specified & directed.

Supply and fixing in repair LED light 12 watt square( 150x150 mm) / round as per requirement type of size 150x 150mm surface/ ceiling mounted with aluminium hausing and frosted cover complete all as specified and direcred.

Supply and fix in replacement of decorative wall light fixture made up of polycarbonate suitable for 10 W retrofit LED lamp and including 9 W LED lamp and including all accessories for fixing of fitting on wall complete all as specified and directed.

Supply and fix in repair LED lamp 9 watt complete all as specified and directed.

Supplying and fixing in repair LED bulk head light fitting wall mounted with inbuilt edge lit LED lamp 10 watt, complete with all acessories complete all as specified & directed.

Supplying and fixing in repair recess mounting LED 2X2 luminaire 34/36 W CRCA powder coating housing with anti-glare diffuser new deep back lit panel metallic frame (including white/ warm white as directed by Engr-in-incharge), including all acessories complete all as specified & directed.

Supply and fixing in repair LED POST TOP LANTERN 40 W ,IP-65 including all accessories for fixing complete all as specified and directed.

S&F in repair LED Flood light 80 watt die cast aluminium housing comprising high power including all needed accessories to fix it on wall/Tree/pole complete all as specified & directed.

Supply and fixing in repair decorative LED tube light fitting 1x20 watt surface mounting , integrated with opal diffuser white/ warm white as per requirement complete with complete all as specified & directed.

Supply and fixing in repair decorative LED tube light fitting 1x10 watt surface mounting , integrated with opal diffuser complete with all acessories as specified and directed.

Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed.

Material and labour for sub main wiring with 2x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + 01 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing and taking down the old unserviceable submain wiring of ant type complete all as specified & directed. Note:- 2 x 6.00 sqmm main wire + 1 x 6.00 sqmm of earth wire along with rigid non-mettalic PVC conduit shall be measured as one unit length.

All as per item No 31.00 here -in- before but using two single core cable of 4 Sqmm for Phase and neutral + 1 single core cable of 4 Sqmm for earth wire complete all as specified & directed. Note:- 2 x 4.00 sqmm main wire + 1 x 4.00 sqmm of earth wire along with rigid non-mettalic PVC conduit shall be measured as one unit length.

All as per item No 31.00 here -in- before but using two single core cable of 10 Sqmm for Phase and neutral + 1 single core cable of 10 Sqmm for earth wire complete all as specified & directed. Note:- 2 x 10.00 sqmm main wire + 1 x 10.00 sqmm of earth wire along with rigid non-mettalic PVC conduit shall be measured as one unit length.

All as per item No 31.00 here -in- before but using four single core cable of 10 Sqmm for Phase and neutral + 1 single core cable of 10 Sqmm for earth wire complete all as specified & directed. Note:- 2 x 4.00 sqmm main wire + 1 x 10.00 sqmm of earth wire along with rigid non-mettalic PVC conduit shall be measured as one unit length.

Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified & directed.

Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison for fixing of 1 No MCCB suitable up to 250 Amps, 25 KA of frame 2 as incomer and 12 Nos MCB'S inside of DB, including 200 Amps ,25 KA 4 pole MCCB with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one including taking down old unserviceable one of any type & size complete all as specified & directed.

Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison for fixing of 1 No MCCB of XT1160 frame suitable upto 160 Amp and 12 Nos MCB'S inside of DB, including 63 Amp to 100 Amps ( as per requirement ) ,18 KA 4 pole MCCB with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one including taking down old unserviceable one of any type & size complete all as specified and directed.

Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision for four pole isolator/mcb as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as specified & directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified & directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified & directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified & directed.

Supply and fixing in repair MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

Supply & fixing in repair MCB, SPN ( Single Pole and Neutral), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed.

S&F in repair Isolator 4 pole 'B' series 100 amps capacity AC 415 V,10kA complete all as specified and directed.

S&F in repair Isolator 4 pole 'B' series 63 AMP amps capacity AC 415 V,10kA complete all as specified and directed.

Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as specified & directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. Note:- After completion of work if desired test result is not obtained the earthing to be redone with out any extra cost of department .

Taking down carefully under ground cable of any size and making good to disturbed surface as per existing complete all as specified and directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

All as per item No 49.00 here -in- before but 16 Sqmm 4 core.

All as per item No 49.00 here -in- before but 16 Sqmm 2 core.

All as per item No 49.00 here -in- before but 10 Sqmm 2 core.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and geting out complete all as specified and directed.

Material and labour for sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed.

Material and labour for continous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Supply / laying and fixing 50 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick in soft / loose soil complete all as specified and directed.

Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed.

S & F in repair, security light brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to required shape including flat iron clamps- 02 Nos with suitable size of nuts and bolts including grouted in wall complete, including distempering to match with existing surface all as specified and directed.

Supply and fix in repair fan capacitor 2.5 MFD single phase 230 volt complete all as specified & directed.

Supply & fixing in replacement of modular switch one way 06 Amps,1 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular socket one way 6 Amps,2/3 pin combined ,2 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular switch one way 16 Amps,1 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular socket one way 6/16 Amps,2/3 pin combined ,2 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular Bell Push 6A,(1 or 2 module as per site), 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular fan step regulator 2 Module complete all as specified & directed.

Supply & fixing in replacement of modular switch two way 06 Amps,1 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular white cover plate with frame,3 module for 6 / 16 Amps Switches And Sockets , 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular white cover plate with frame,4 module , 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular white cover plate with frame,6 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular white cover plate with frame,8 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular white cover plate with frame,12 or more Module Required at site module, 240 volts complete all as specified & directed.

S&F in repair pressed steel terminal box 60 mm deep with 3 mm thick laminated sheet on top for mounting switch/socket/ regulator incl taking out old box & making good the disturbed surface as per existing of the size 75m x75 mm complete all as specified & directed.

All as per item No 73.00 here -in- before but size 100x100 mm

All as per item No 73.00 here -in- before but size 150x75 mm

All as per item No 73.00 here -in- before but size 175x100mm

All as per item No 73.00 here -in- before but size 200x150mm

M/L for fixing in repair Metal Flush box (GI) 51 mm deep excluding sheet on top incl taking out old box, cement work & making good the disturbed surface as per existing of the following sizes metal Flush Box of 3 Module suitable for 6 Amp/ 16 Amp 3 Module sheet complete all as specified & directed.

All as per item No 78.00 here in before but size Metal flush Box of 6 Module.

All as per item No 78.00 here in before but size Metal Flush Box of 8 Module

S&F in repair 3 mm laminated sheet suitable for 5 Amp independent board and cut in suitable size to fix 5 Amp switch and socket complete all as specified and directed.

S&F in repair 3 mm laminated sheet suitable for 15 Amp independent board and cut in suitable size to fix 15 Amp switch and socket complete all as specified and directed.

S&F in repair 3 mm laminated sheet suitable for Same board and cut for suitable no. of switches ,socket and fan regulatoras as per site requirement complete all as specified and directed.

Supply & Fix in repairs LED driver suitable for 25 w LED security lights as per existing Make & Model at site complete all as specified & directed.

Supply & Fix in repairs LED driver suitable for 45 w LED security lights as per existing Make & Model at site complete all as specified & directed.

Supply & Fix in repairs LED driver suitable for 36/42 w LED Panel light fitting 2x2 as per existing Make & Model as per site requirement.

Supply and Fixing in repair three phase manual chage over 415 volt 100 Amp including making connection complete all as specified & directed.

M&L earthing complete with copper plate 60x60cmx3.15mm thick electrode, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to 20x3mm copper strip as earthing lead by means of bolts, nuts, check nuts and washers all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion including dismantling of old earthing complete all as specified and directed.

Manish Enterprises

ATHARV CONSTRUCTION

yameen enterprises

NITHYA INFRATECH

PARADISE INFRA POWER COMPANY

Ramesh Traders Govt Contractors & General OrderSuppliers