Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.9 LAccepted-AOC 17 1A BALLYGUNGE CIRCULAR ROAD KOLKATA 700 019 | KOLKATA | WEST BENGAL | 700019 | L1 | Accepted-AOC Being a lowest bidder and reasonable | |
| 2 | L2₹46.7 L+₹2.0 L (4.43%)Rejected-Finance 2 10 PANCHANANTALA ROAD KOLKATA 700 041 | KOLKATA | WEST BENGAL | 700041 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹48.6 L+₹3.9 L (8.73%)Rejected-Finance 121004 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹48.7 L+₹4.0 L (8.88%)Rejected-Finance 7 11 1 BROJONATH LAHIRI BISHNUPUR SOUTH 24 PGS WEST BENGAL 743503 | 24 PARAGANAS SOUTH | WEST BENGAL | 743503 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹49.1 L+₹4.4 L (9.91%)Rejected-Finance VILL PUILLYA PO UNSANI DISTT HOWRAH PIN 711302 | HOWRAH | WEST BENGAL | 711302 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹39.5 L
EMD Value
₹79,000
Closing Date
24 Jun 2024, 6:00 pmClosed
GE (FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
CLEANING OF OH TANKS/ UG AND FRESH WATER SUMPS AND IMPROVEMENT OF UG SUMPS AND OH TANKS AND REPAIR/ REPLACEMENT OF OLD / UNSERVICEABLE PIPELINES AT VARIOUS MD/ OTM ACCN AT OUTSIDE FORT WILLIAM UNDER GE (FW) KOLKATA
2024_MES_637326_2
8212/E8
Open Tender
Electrical and Maintenance Works
Item Rate
240 days
GE (FW) Kolkata
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (FW) Kolkata
₹79,000
2 Sept 2024
13 Jun 2024
25 Jun 2024
13 Jun 2024
24 Jun 2024
19 Jun 2024
Amount
M&L for Cleaning of 3 lakh gallons capacity overhead reservoir (consisting of one inner tank of 4.02 Mtr dia and one outer tank of 9.75 Mtr dia of depth 9.63 Mtr) at a height of 35 Mtr from the ground (Approx), and through 6 stages of cleaning and sterilization consisting of the following stages complete all as specified & directed by the Engr-in-Charge. Location : Power House OHT Cleaning through Agencies:- RAYS CLEANTECH/ INUS WATERTECH/ MS TANK CLEANING
(a). First Stage :- Mechanised Dewatering, This first stage consists of emptying water from the tank. A submersible pump is used to drain the tank of excess of water. Removal of water and semi sludge with the help of sludge pump (electric/hydraulic)
(b). Second stage :- Sludge Removal, A sophisticated suction process is used to drain the excess sludge out of tank at a safe place away from tank. Removal of mud, sand and solid particles up to 4 inch size with the hydraulic sludge pump.
(c). Third storage :- High Pressure Cleaning, The tank is then cleaned using high pressure jet machine. The rotary jet is used to clean walls and ceilings, whereas plain jet is used to clean the corners of the tank. The rotary jet acts as scrubber and can clean the most stubborn depositions. Cleaning of floor, walls and ceiling with the help of German made high pressure rotary jet pump having pressure range between 80-180 bars.
(d). Fourth stage :- Vacuum Cleaning, The additional sludge and impurities are then removed by using a industrial vacuum cleaner and are again disposed at a safer place away from the water tank. An industrial vacuum pump is then used to clean the leftover physical impurity from the floor.
(e). Fifth stage :- Antibacterial Spray, after above steps of cleaning, the tank is treated with an antibacterial spray (sodium hypochlorite) on the surface of the wall of the tank to make it completely bacteria free and safe for use. Our use of chemical is just to disinfect the germs and bacteria on the walls and ceiling only.
(f) . Sixth stage - UV Radiation, the water storage tank is then treated with ultra-violet (UV) radiator to make it bacteria free and safe for storing your drinking water. A specially developed UV radiator is used to kill suspended or floating bacteria remaining in the tank.
Note : (i) All T&P, PPE Kit, Transport shall be born by the contractor without any extra cost. (ii) Date of cleaning of tank should be written on the outer surface of tank in white letter over black background complete as directed.
All as per item No.01 here in before, but of size 2 Lakh Gallon capacity overhead reservoirs consisting of inner & outer tank at a height of 25 Mtr (Approx) from the ground, complete all as directed by the Engr-in-Charge. Location :P-13 Pump House
All as per item No.01 here in before, but of size 1 Lakh gallon capacity overhead reservoirs at a height of 20.0 Mtr from the ground (Approx), complete all as directed by the Engr-in-Charge. Location : Gora bazar OHT
All as per item No.01 here in before, but of size 20000 gallon capacity overhead reservoirs at a height of 15 Mtr from the ground, complete all as directed by the Engr-in-Charge. Location : New RRC pump house OHT & AOI
All as per item No.01 here in before, but of size 10000 gallon capacity overhead reservoirs at a height of 7.5 Mtr from the ground, complete all as directed by the Engr-in-Charge. Location : Pump House No 1 & Ladies Golf
All as per item No.01 here in before, but of size 5000 gallon capacity overhead reservoirs at a height of 35 Mtr (Approx) from the ground, complete all as directed by the Engr-in-Charge. Location : MAP Block A, B, C, 1 & 2
All as per item No.01 here in before, but of size 2 lakh gallon capacity under ground water sump, complete all as directed by the Engr-in-Charge. Location : JCO's MAP Pump house
All as per item No. 01 here in before, but of size 1 Lakh gallon capacity under ground water sump, complete all as directed by the Engr-in-Charge. Location : Water gate, No 3 Pump house (02 Nos), Offrs MAP Pump house, Queens Bk pump House, & MAP OR Accn
All as per item No.01 here in before, but of size 30000 gallon capacity under ground water sump, complete all as directed by the Engr-in-Charge. Location : Dalhousie BK Pump house, AOI Pump House & Sweet water Pump House
All as per item No.01 here in before, but of size 20000 gallon capacity under ground water sump, complete all as directed by the Engr-in-Charge. Location : OD - II Pump House, SO-II Pump House, Command Mess Pump House & New Command Bldg Pump house
All as per item No.01 here in before, but of size 10000 gallon capacity under ground water sump, complete all as directed by the Engr-in-Charge. Location : Horse Riding club P/H, O2 Mess P/H, KP Qtr P/H & New Golf UG Sump
Note for item No 1 to 11: - After cleaning, the date of cleaning is required to be written, with size of letters / numbers as directed by the Engineer-in-Charge, in white colour paint with a black paint background.
Preparing the surface by removing the spalled and loose plaster from existing surface and making it sound and clean by removing all dust particle and washing the surface with jet water. Then allowing the surface to dry and check for any cracks, honeycombing and other foreign particle complete as directed.
Supplying, providing, mixing and laying over the prepared surface with cement mortar of average 15 mm thick or as per requirements in proportion 1:3 (1 Cement : 3 Sand) mixed with bonding agent, Nitoband SBR laded @ 5 litre per 50 Kgs of cement and integral waterproofing admixture complast WL of Fosroc Chemicals @ 125 ml per 50 Kg of cement complete all as specified and directed
M&L cross arms, bracing, supports, clamps and back plate fabricated from structural steel section including nut, bolts, washers, welding, bending, cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium/Black paint complete all as specified and as directed .
M&L Stripping off existing starter panel and replace defective power contactor 3 pole, 415 Volt AC 3 phase type ML-3 with new copper lugs of suitable size and re-assembling of the panel including rectification of fault and safety device, adjustment of time etc complete as directed .
All as per item No 16 but of type ML 2 complete as directed by the Engr-in-Charge.
All as per item No 16 but of type ML 6 complete as directed by the Engr-in-Charge.
All as per item No 16 but of type MNX 95 complete as directed by the Engr-in-Charge.
All as per item No 16 but of type MNX 32 suitable for 415 Volts, complete as directed by the Engr-in-Charge.
All as per item No 16 but of type MNX 25 suitable for 415 Volts, complete as directed by the Engr-in-Charge.
All as per item No 16 but of type MNX 12 suitable for 415 Volts, complete as directed by the Engr-in-Charge.
S&F in repair Thermal over load relay for ML-2/3 directly mounted relay range 28 to 42 A as in repair complete all as directed .
S&F in repair MCCB 3 pole 18 KA breaking capacity 100 A with thermal magnetic release as in repair complete all as directed .
S&F in repair MCCB 4 pole, 415 Volts Adjustable type, 100 Amps with breaking capacity 40 KA , front operated with extension rod fixing on existing LT panel board, as in repair complete all as specified and as directed.
S&F in repair MCCB 4 pole, 415 Volts Adjustable type, 250 Amps with breaking capacity 40 KA , front operated with extension rod fixing on existing LT panel board, as in repair complete all as specified and as directed
Supply only,Poly Aluminium Chloride (PAC) suitable for drinking water, high basicity in granular/ powder form inorganic soluble polymer confirming to IS 15573 in required pack.
Supply only , High strength calcium based granular chlorination chemical (Calcium Hypochlorite in 45 Kg Drum) having chlorine (cl) percentage by volume 65% to 70% (disinfectant for water treatment).
Materials and Labour for valve pit cover suitable for brick masonry valve pit of size 1000 mm X 1000 mm X 1000 mm (internal dimensions) made out of 3 mm thick MS plate welded with 40 x 5 mm thick FI frame all round including provision of hinges, handles, locking arrangement, ISA 40 x 40x 5 mm frame, fixed on top of existing valve pit by means of hold fast 150 mm long, embedded in PCC 1:2:4 type B1 (Block size 230 X 200 X 100 mm) including applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer and including taking down existing unserviceable valve pit cover, complete all as specified and directed.
All as per item No 29 here-in-before but 600 x 600 x 600 size
Repairs/ servicing to sluice valve by taking out unserviceable spindle, Gate along with worn out check nuts from the sluice valve of 200 mm bore after removing the top cover and stuffing box of sluice valve spindle, and refixing with new spindle, Gate with check nut, gland packing, gasket, replacing of rusted unserviceable nuts/ bolts/ washers with SS with new nuts, bolts, gaskets etc for arresting all leakages/ smooth operation complete all as specified and directed.
Repairs/ servicing to sluice valve by taking out unserviceable spindle, Gate along with worn out check nuts from the sluice valve of 150 mm bore after removing the top cover and stuffing box of sluice valve spindle, and refixing with new spindle, Gate with check nut, gland packing, gasket, replacing of rusted unserviceable nuts/ bolts/ washers with SS with new nuts, bolts, gaskets etc for arresting all leakages/ smooth operation complete all as specified and directed.
S & F in repairs 15 mm dia Ball valves Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S & F in repairs 20 mm dia Ball valves Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S & F in repairs 25 mm dia Ball valves Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
Materials and Labour in repair for, straight plain brass ferrules (or connecting screws) screwed both ends for 15 mm bore pipes and fixed, complete all as specified and directed.
Supply, laying and testing of 110 mm outer dia, including dismantling 3- layer PP-R Polypropylene random copolymer) pipes SDR 11 UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed by Engr-in-Charge.
All as per Item 37 but of 90 mm outer dia
All as per Item 37 but of 63 mm outer dia
All as per Item 37 but of 50 mm outer dia
All as per Item 37 but of 40 mm outer dia
All as per Item 37 but of 32 mm outer dia
All as per Item 37 but of 25 mm outer dia
Supply and fixing PPR Gate valve with brass insert and brass working parts suitable for 25 mm OD PPR pipe complete all as specified and directed.
All as per ITEM NO 44 but for 32 mm OD pipe
All as per Item No. 44 but for 50 mm OD pipe
All as per Item No. 44 but for 63 mm OD pipe
All as per Item No. 44 but for 90 mm OD pipe
All as per Item No. 44 but for 110 mm OD pipe
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, for laying of pipes/cables/poles etc., forming bottom surfaces to required slope/gradient where pipe are laid and getting out in any type of soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed.
Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.
S & F in repairs Electronic motor protection relay unit in built earth fault protection with single phase protection system complete Make L&T Cat No MPR305BB320
Supply, Installation, testing and commissioning of Chemical Solution Dosing System comprising of dosing pump (suitable for chlorine solution prepared from calcium based granules/solution prepared from Poly Aluminium Chloride (PAC) Inorganic soluble polymer raw water flocculants powder ), AC, single phase, 230 Volts, 50 Hz, electrically operated with high starting torque, having positive displacement diaphragm type accurated by a solenoid solid state pulsar, with discharge capacity of 1 to 6 Litres/Hour of standard mixture of calcium based calcium base chlorine granule with water/PAC with water, of any strength and suitable for injecting chemical mixture at 4 to 6 Kg per sq cm pressure, with provision of polypropylene /LDPE suction and discharge pipes of suitable size and length with swing seal foot valve at bottom end of suction pipe, and with 150 Litres capacity FRP tank with FRP Lid having post hole for pouring calcium based chlorine granules/PAC and water, including provision for mounting the dosing pump on the lid/wall of FRP tank , provision of Level Gauge, Agitator (1280 to 1400 RPM) with shaft and blade in SS 316 (FRP Coated/Epoxy Coated /Plastic Coated) mounted on tank complete with all accessories required for installation as per Manufacturers instructions including supply of 02 (Two) Years normal maintenance Spares i.e. (i) PVC Pump roller tube – 02 (Two) Nos. (ii) Mixing Blade complete with PVC shaft and pin as per Manufacturers instructions – 02 (Two) Sets. and including making provision of mounting the pump set and provision of PCC foundation for placing the FRP tank, complete all as specified and directed.
S&F PVC insulated single core multi stranded copper conductor FR Cable of cross sectional area 10 sq mm for inter-connection as in repair complete all as specified and as directed.
All as per item No 49 but of cable size 4 Sqm.
All as per item No 49 but of cable size 6 Sqm.
Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.
ARATI TRADING CO
GHOSH ENTERPRISE
SK CONSTRUCTION SYNDICATE & ENGG CO
PRABIR TRADERS
MS JYOTI INDUSTRIES
MS HORIZEN
MS AP CONSTRUTION AND CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .