SPL REPAIRS TO BLDG NO P 04 ADM BLOCK OF ARTY BDE AT FARIDKOT MIL STN

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazzo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises complete all as specified.

Demolition of cement concrete in ground floors and any description and in any position not otherwise specifically provided for (thickness of tiles and screed bed measured as PCC) etc and rubbish off the premises all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick (Square/rectangular) light shade polished area of each tiles not exceeding 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match, 15mm thick screed bed or bedding layer CM 1:4 for laying finishes complete all as specified.

All as per Srl item No 3 here-in-before but in skirting over 10 mm thick backing coat in CM 1:4 as specified and directed.

S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:4 for laying finishes, complete all as specified as directed by Engr-in-Charge

S&F Glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick rendering in CM 1:4 on other than fair face of brick work complete all as specified and directed

M&L for granite (of any type) work 12 to 15 mm thick (table rubbed and polished) in steps, jambs, pillars, door /window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking of shutters from the frames) incl making good disturbed surfaces of wall matching adjoining wall finish and removing taken down material from site complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but not exc 4.00 Sqm each with shutters (without taking of shutters from the frames) incl making good disturbed surfaces of wall matching adjoining wall finish and removing taken down material from site complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge

S&F factory made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (suspension grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutters and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed by Engineer-in-charge. (Note : stainless steel butt hinges shall be paid separately)

S&F factory made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspention grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutters and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed by Engineer-in-charge. (Note : stainless steel butt hinges shall be paid separately)

S&F 100 mm long, Stainless Steel hinges with stainless steel screws complete all as specified and directed

S&F Stainless Steel handle 100 mm size complete all as specified and directed.

S&F Stainless Steel handle 150 mm size complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed

S&F 140 mm floor door stopper of Stainless Steel body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

S&F Brass 4 levers mortice lock, vertical type, size 100mm complete all as specified

S&F factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass / wire mesh shall be paid in supply only rates separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid in supply only rates separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

Supply only toughened glass 6 mm thick to required size shape to be fixed in UPVC window complete all as specified and directed by Engr-in-Charge

All as per Srl item No. 23 here-in-before but frosted on one side

Supply only Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm to be fixed in UPVC window complete all as specified and directed by Engr-in-Charge

M&L for providing and fixing stainless steel (Grade 304) in Window Grill made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the Grill with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size complete all as specified and directed by Engr-in-Charge

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified

M&L for Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under :- (a) Cleaning of sunken portion and roughening to receive treatment. (b) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound trowel even and smooth with steel trowel on sunken surfaces (Note : WPC shall be measured and paid separately) (c) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer. (d) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation. (e) Applying second coat of chemical Pidifin 2K (Dr Fixit) / equivalent @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers. Note: The plan area of floor shall be considered for payment

M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc. complete all as specified

M&L 25mm thick PCC 1:2:4 type B0 (12.5mm graded aggregate) with WPC under floor over sunken complete all as specified and directed Note : WPC will be measured and paid separately. (WPC will conforms to IS: 2645-2003)

Taking up or down GI tubing 15mm bore pipe complete all as specified.

Taking up or down GI tubing 20mm bore pipe complete all as specified

Taking up or down GI tubing 25 mm bore pipe complete all as specified

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete including cutting chases in wall, floors etc and their making good in case of concealed pipe work all as specified. bore of pipe 20mm complete all as specified and directed by Engr-in-Charge.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete including cutting chases in wall, floors etc and their making good in case of concealed pipe work all as specified. bore of pipe 25mm complete all as specified and directed by Engr-in-Charge.

S&F of 20 mm inner dia CPVC Brass Male Threaded Adaptor fittings complete all as specified.

S&F of 20 mm inner dia CPVC Brass Female Threaded Adaptor fittings complete all as specified.

S&F of 20 mm Brass Elbow (3/4 x 1/2) fittings complete all as specified

S&F of 20 mm Brass T fittings complete all as specified

S&F of 25 mm CPVC Tank adaptor fittings complete all as specified

S&F of 20 Brass Union fittings complete all as specified

S&F of 25 Brass Union fittings complete all as specified

S&F of 25 CPVC Ball valve complete all as specified

S&F in repair Rotational moulded polythylene 500 capacity water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position including 25mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. & dismantling of old water tank complete all as specified

S&F in repair 15 mm dia bore fancy type chromium plated bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and directed

S&F in repair 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed all as specified and directed

S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified

S&F in repairs 15 mm bore Pillar taps, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge

S&F of vitreous china wash hand basin of approved white and "Oval" shape fixed on granite plate form including waste coupling, bottle trap fixed in repairs complete all as specified and directed. Make : Hindware/Parry ware

M&L for 100 mm dia of long body PVC 'P' or 'S' trap including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified

S&F Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified

S&F in repair vitreous china urinal, half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe, (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed

S&F urinal spreader of chromium plated for fixing with 15mm dia pipe complete all as specified.

S&F 12mm thick toughened glass as in partitions of urinal and similar work including cutting to shape, drilling holes, fixed with metal panel pins, frosted, SS cleat etc required all as specified.

S&F vitreous China 1st quality one piece wash down water closet wall hung EWC white/ivory/off white including all necessary accessories like rag bolts/gel basket with wash down water closet wall hung type with plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S&F one piece/single body PVC blow moulded concealed cistern, pneumatic type; capacity 9-10 ltrs, including chrome finish dual flush control plate, flushing pipe and fixing brackets complete assembled and fixed at site all as specified

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified.

S&F in repair Towel Ring of stainless steel fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed

S&F PTMT soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed.

S&F Stainless steel fancy type peg set of six and fixed in position with steel screws complete all as specified and directed.

Dismantling and disconnecting existing CI / PVC soil waste/vent pipe 100/75 mm bore fixed to wall, laid in trenches incl all fittings & accessories complete all as specified

S&F 110 mm bore of pipe PVC (SWR) pipes heavy grade single socket in any length with rubber ring joint fixed to walls with MS clamps, laid in trenches complete all as specified and directed.

S&F 75 mm bore of pipe PVC (SWR) pipes heavy grade single socket in any length with rubber ring joint laid in floor / fixed to Wall with MS clamps complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends heavy grade of any radius / shoe fixed to PVC pipes complete all as specified

S&F 75 mm bore of pipe PVC (SWR) bends heavy grade of any radius / shoe fixed to PVC pipes complete all as specified

M&L for 75mm dia of long body PVC Floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified.

M&L for PVC (SWR) branch piece, single (single Y), 75 mm bore, (equal or unequal), complete all as specified and directed by Engineer-in-Charge.

M&L for PVC (SWR) branch piece, single (single Y), 100 mm bore, (equal or unequal), complete all as specified and directed by Engineer-in-Charge.

M&L for PVC (SWR) junction single,(Single T), 75 mm bore, (equal or unequal), ordinary or inverted (spigot or socket type) or with oval access door as in repairs complete all as specified and directed by Engineer-in-Charge.

M&L for PVC (SWR) junction single, (Single T), 100 mm bore, (equal or unqual), ordinary or inverted (spigot or socket type) or with oval access door as in repairs complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) vent cowl 100 mm complete all as specified and directed

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified

M&L for rendering 12mm thick in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified

M&L for rendering 15mm thick in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smooth without using extra cement & with using integral water proofing compound complete all as specified. (Note : WPC shall be measured and paid for separately)

M&L for rendering 5mm thick in cement mortar in 1:3 on ceiling all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of wall /ceiling and applying two coat of distemper oil emulsion white/tinted over a coat of wall care putty finished even and smooth surface by hand roller complete all as specified and directed by Engr-in-charge.

M&L for preparation of newly plastered or unplastered surfaces of wall and finishing walls with Acrylic smooth exterior paint of required shade : New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified.

M&L for preparing surfaces plaster or unplastered on old surfaces of walls and applying two coat of distemper oil emulsion white/tinted using hand roller complete over two coat wall care putty all as specified

M&L for complete removal of existing treatment of old decorated surfaces of wall by mechanical sander/ brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and filling in depressions to make smooth surface and finishing walls with Acrylic smooth exterior paint of required shade : New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified.

M&L for preparation of old painted surfaces applying one coat of synthetic enamel paint (ordinary tint) on steel surfaces over 10cm width or girth complete all as specified and directed by Engineer-in-Charge.

Dismantling of brick work built in cement mortar of any description complete all as specified and directed by Engineer-in-Charge

M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius wall built in cement mortar 1:6 complete all as specified

M&L for old size brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified

Supply only Liquid water proofing compound all as specified

M&L for cutting opening, through brick walls built in cement mortar for door, window and other openings or enlarging existing opening, converting window to door openings etc or cutting out defective brick work for under pinning including providing fixing and removing shoring cleaning and stacking bricks removing surplus serviceable bricks ard core etc to store and rubbish not exc 50 all as specified and directed

M&L for forming jambs, etc to openings in cement mortar 1:6 including cuttings, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work complete all as specified and directed

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for partitions (fixed portions) with extruded built up standard tubular section/appropriate Z section and other sections of approved make conforming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, ie at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, CP brass/stainless steel screws, all complete as per architectural drawings and the direction of Engr-in-Charge.

S&F of 5mm thick tinted glass ordinary quality exc 0.50 sqm in each pane complete all as specified.

S&F pre- laminated particle board, exterior grade 12mm thick, pre- laminated both sides with decorative choice lamination complete all as specified.

Taking down false ceiling including snap grid of any type or any description complete all as specified.

S&F Armstrong false ceiling with board of size 600x600x12mm thick including Armstrong grid work all as per manufacturer instructions etc, complete all as specified & directed.

S&F hollow PVC wall lining interlocking type 7mm thick plain/coloured/wood grain fitted in tot the wall with PVC rawal plug and steel screws including fillets on joints as per manufacturers instruction etc complete all as specified and directed by Engr-in-Charge. Note : If any minor electric fittings and fixtures disturbed there will be match and fixed as existing.

S&F Aluminium powder coated/colour anodised (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc completed all as specified.

S&F Anodised aluminium powder coated door shutters (minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified.

S&F of door closer hydraulically regulated aluminium (dia cast) body designation No 3 universal type suitable for door shutter of weight between 61 to 80Kg of approved make having ISI mark all as specified complete all as specified.

S&F aluminium anodised tower bolt 200mm long and fixed complete all as specified.

S&F aluminium door lock 7 lever vertical type brass body 100mm long with duplicate key complete all as specified. Make : Godrej

S&F 12 mm thick toughened glass as in SS pivot hinge doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, complete all as directed by Engr-in-Charge

M&L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed

S&F stainless steel D / H type handle of size 300 mm long for toughened glass door complete all as specified

S&F SS glass door patch lock fixed to door with triplicate key complete all as specified.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed by Engr-in-Charge.

Taking down MCB, DB any Type including MCBs and making good to the disturbed walls and surface area etc all as specified and directed by Engr-in-Charge.

Taking down submain wiring any type with earthing cable and making good to disturbed area all as specified and directed by Engr-in-Charge.

M&L for point wiring complete with ISI marked 1.5 sqmm single core PVC insulated unsheathed cable 1100V grade FRLS with multistranded copper conductor drawn through existing concealed conduit including galvanised steel pressed modular terminal boxes of suitable sizes for mounting of switches, sockets, fan regulator etc covered with modular top cover sheet including 1.5 sqmm multistranded copper conductor as earth continuity to connect common earth dolly and making good disturbed surfaces of walls complete all as specified and directed, for One light point/Fan point/Exhaust point / bell point controlled by one way switch

All as per Srl item No. 106 here-in-before but one three pin socket out let 5 amps on the same board with other switches

All as per Srl item No. 106 here-in-before but one 3 pin, 5A switch socket outlet point on independent board

All as per Srl item No. 106 here-in-before but with 2.5 sqmm cable for 1No 16 amps socket outlet point on independent board including 2.5 sqmm PVC insulated unsheathed cable multistranded with copper conductor as earth continuity conductor complete all as specified and directed.

S&F ceiling rose 3 terminal / PVC / polycarbonate isolated body all as specified and directed by Engr-in-Charge.

S&F Modular switch 1 way 6 amps one module all as specified and directed

S&F Modular socket 6A 2/3 pin combined 2 module all as specified and directed

S&F Modular switch 1 way 16 amps 1 module all as specified and directed

S&F Modular socket 6A / 16A - 2/3 pin combined 2 module all as specified and directed

S&F PVC Lamp holder batten complete all as specified and directed.

S&F of 9 Watt LED lamp all as per specification & directed by Engineer-in-Charge.

S&F fan step regulator, 120W - 1 module complete all as specified and directed

S&F LED tube light fitting 20W, 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed by Engineer-in-Charge

S&F LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engr-in-Charge with following specification:- (a) Lumen efficacy of luminaire should be more than 100 Lumen per watt. (b) Voltage operating range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP20. (g) CRCA pre coated housing. (h) LED Driver of the make as of the luminaire. (l) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (m) Inbuilt Surge protection device for 4 kV.

S&F LED street light 25W luminaires comprising of epoxy powder coated housing, enclosed with glass cover including 40mm dia GI bracket and fixing arrangement in road light, security light etc complete with accessories and including connecting up with twin core flexible copper conductor cable 1.5 sqmm size including taking down old unserviceable any size and specification complete all as specified and directed

Taking down existing serviceable ceiling fan / Exhaust Fan and deposit to MES store yard complete all as specified and directed by Engr-in-Charge

S&F Energy efficient Ceiling fan complete with blades, down rods, suitable for regulator & accessories, 230 V,1200mm sweep, BEE, 5 star rated with brushless direct current motor (BLDC) including writing of MES number (Black, Roman, Italic or Indian) n. exc 30cm height complete all as specified and directed

S&F sheet metal enclosure for DB's SPN 230 volts 12 way double door complete all as specified and directed ..

S&F sheet metal enclosure for DB's SPN 230 volts 8 way double door complete all as specified and directed.

S&F (concealed flush to wall) factory made loadline DB (made out of CRCA sheet fitted with DIN channel neutral link and 250 Amp rated bus bar) VTPN, 4 Way, suitable for mounting MCCB as incomer and MCB as outgoing conforming to IS-13032, DB shall be semi glossy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-42 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessity complete all as specified and directed by Engineer-in-charge. Note :- MCCB/MCB shall be measured and paid separately under appropriate item of BOQ

S&F MCCB 4 pole, 415 V. adjustable type, 100 Amp with breaking capacity 16 KA and including taking down old unserviceable items and as complete all as specified and directed.

S&F, 10KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40 AMP, complete all as specified and directed

S&F 10KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 Amp complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, complete all as specified and directed

S&F isolator TPN 63 A 415 V complete all as specified and directed

S&F isolator TPN 100 A 415V complete all as specified and directed

M&L for wiring for circuit sub main wiring with PVC FRLS insulated copper conductor 2x 4 sqmm and same 1x4 sqmm for continuous earth wire drawn in to and including concealed PVC conduit not less than 25 mm dia complete all as specified and directed by Engr-in-Charge

M&L for wiring for circuit sub main wiring with PVC FRLS insulated copper conductor 2x 6 sqmm and same 1x6 sqmm for continuous earth wire drawn in to and including concealed PVC conduit not less than 25 mm dia complete all as specified and directed by Engr-in-Charge

M&L for wiring for circuit sub main wiring with PVC FRLS insulated copper conductor 4x 16 sqmm and same 1x16 sqmm for continuous earth wire drawn in to and including concealed PVC conduit not less than 32 mm dia complete all as specified and directed by Engr-in-Charge

M&L for wiring for circuit sub main wiring with PVC FRLS insulated copper conductor 4x 10 sqmm and same 1x10 sqmm for continuous earth wire drawn in to and including concealed PVC conduit not less than 32 mm dia complete all as specified and directed by Engr-in-Charge

M&L for wiring for circuit sub main wiring with PVC FRLS insulated copper conductor 4x 06 sqmm and same 1x06 sqmm for continuous earth wire drawn in to and including concealed PVC conduit not less than 32 mm dia complete all as specified and directed by Engr-in-Charge. Note :- A Sum of Rs. 31,429.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 42 (Schedule of credit) of Tender Documents.

Please Enable Macros to View BoQ information