Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.7 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING L1 | |
| 2 | L2₹36.5 L+₹2.2 L (6.36%)Rejected-AOC | L2 | Rejected-AOC REJECTED DUE TO NOT BEING L1 | |
| 3 | L3₹36.6 L+₹2.3 L (6.81%)Rejected-AOC | L3 | Rejected-AOC REJECTED DUE TO NOT BEING L1 | |
| 4 | L4₹38.1 L+₹3.8 L (11.1%)Rejected-AOC | L4 | Rejected-AOC REJECTED DUE TO NOT BEING L1 | |
| 5 | L5₹39.1 L+₹4.8 L (14.0%)Rejected-AOC NO 36 MARAGATHAM STREET SAKTHI NAGAR NAGALANMAN NAGAR JOTHI NAGAR POST ARAKKONAM VELLORE TAMIL NADU 631003 | ARAKKONAM | VELLORE | TAMIL NADU | 631003 | L5 | Rejected-AOC REJECTED DUE TO NOT BEING L1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
28 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer M NAS Arakkonam
Garrison Engineer M NAS Arakkonam
REPAIRS TO JOINERY LIKE DOORS WINDOWS BATHROOM DOORS GLASS PANES WIREMESH ETC IN ZONE A AND B AREA AT ARAKKONAM
2023_MES_605489_1
8287E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer M NAS Arakkonam
As per NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer M NAS Arakkonam
₹60,000
Yes
21 Aug 2023
27 Jun 2023
31 Jul 2023
27 Jun 2023
28 Jul 2023
11 Jul 2023
Amount
Repairs to door frames / Shutters and Resecuring, easing, adjusting and refixing in same opening of any description with shutters area exceeding 1.5 Sqm but n exc 4 sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.
All as per item No 1 above but area n.exc 1.5 Sqm complete.
Repairs to steel windows/doors by mechanically (using welding, Cutting, Grinding machineries etc…) where necessary and make the joineries operationally and complete all as specified and as directed.
Taking down and refixing of door frames and Shutters with Resecuring, easing, adjusting and refixing in same opening of any description with shutters area exceeding 1.5 Sqm but n exc 4 sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.
.All as per item No 4 above but area n.exc 1.5 Sqm complete.
Taking down shutters and refixing Resecuring, easing, adjusting and refixing of any description exc 1 Sqm but n exc 2 Sqm each complete all as specifed and directed.
All as per item No 6 above but area n.exc 1 Sqm complete.
Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm but n exc 4 sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.
Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.
S & F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed.
S & F 30mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for windows, ventilators,etc complete, size of member of shutter as spd in SSR Part -I, Sec 8, clause 8.24 (b).
S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing
S&F factory made solid panel PVC moulded door shutter With Particle With Wood Board Core, 28 to 30 mm thick(styles), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.
S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as directed.
M&L PCC 1:3:6 type C1 (20mm graded aggregates) as in bed blocks for hold fasts including necessary form works.
S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0
Supply and fix Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed
Supply and fix in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.
S & F 4mm thick sheet glass, ordinary quality and glazing with rubber beading around the glass, in squares n exc 0.50 sqm in each pane complete all as specified and as directed.
S & F 4mm thick, frosted or grounded on one side with rubber beading around the glass, in squares n exc 0.50 sqm
M&L Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer.
Supply and fix in 100mm size stainless steel hinges, medium weight complete all as specified and as directed by Engr-in-charge.
Supply and fix in 150 mm long stainless steel tower bolts, fixed in screws complete all as specified and as directed by Engr-in-charge.
Supply and fix in 100 mm long stainless steel tower bolts, fixed in screws complete all as specified and as directed by Engr-in-charge.
Supply and fix in door handle, 125mm size, stainless steel, complete all as specified and as directed by Engr-in-charge.
Supply and fix in 300mm long stainless steel, sliding door bolt with hasp, stapple (bolt type) and fixing clip of sheet, and fixing bolts and sliding bolts of stainless steel complete all as specified and as directed by Engr-in-charge.
Supply and fix in repairs 100mm size stainless steel hinges, medium weight complete all as specified and as directed by Engr-in-charge.
Supply and fix in repairs 150 mm long stainless steel tower bolts, fixed in screws complete all as specified and as directed by Engr-in-charge.
Supply and fix in repairs 100 mm long stainless steel tower bolts, fixed in screws complete all as specified and as directed by Engr-in-charge.
Supply and fix in repairs door handle, 125mm size, stainless steel, complete all as specified and as directed by Engr-in-charge.
S&F in repairs 300 mm long stainless steel sliding door bolt with hasp & staple (bolt type) & fixing clips of sheet cast or extruded section and fixing bolt & sliding bolt of extruded section or cast aluminium alloy complete all as specifed.
S & F of 150 mm size (Overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.
S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc
Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete.
S&F 4mm thick sheet glass ordinary quality and glazing with rubber beading exc 0.5 Sqm each pane complete all as specified.
S&F 4mm thick sheet glass ordinary quality and glazing with rubber beading n. exc 0.5 Sqm each pane complete all as specified.
S & F 4mm thick sheet glass, frosted or grounded on one side with rubber beading around the glass, in squares n exc 0.50 sqm
Material and labour for repairs 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed in pelmet box with nails to timber frame work complete all as specified and as directed by Engr-in-charge.
S&F in repair preliminated particle board of 18/19mm, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screw to timber frame work, complete all as specified.
S&F 6 mm thick teak wood lipping to 12 mm thick particle board
S&F 6 mm thick teak wood lipping to 18/19 mm thick particle board
S&F 100 mm size hasp and staple, safety type stainless steel including bolt to hinge plate and fixed to screw.
S&F in repairs continous (piano) hinges ,mild steel ,bright finish or electro galvanised width of flap 30 mm complete all as specified.
S&F in repairs 40 mm dia cub board knobs fixed with nut screw and washer of mild steel bright finished
Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed.
Supply and fix powder coated anodised sliding/hung type aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) etc. complete all as specified and as directed
S & F powder coated anodized aluminium grill of 8mm x 8mm bars size of opening 7.50cms size mesh with aluminium channel 'F/U' angle / channel aluminium frame work all as specified and as directed.
S&F in repair 100 mm size mortice lock with two lever (vertical type) brass body and fixed complete all as specified.
Petty repairs to joinery works such as easing of doors/ windows/ kitchen cabinets , refixing builder hardware gauze etc by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engneer In Charge. Note :(i) Replacement of builders hardware if required shall be measured and paid separately.
Taking shutters of any description exc 1 sqm and n exc 2 sqm all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.
S & F powder coated anodized aluminium grill of 8mm x 8mm bars size of opening 10cms size mesh with aluminium channel 'F/U' angle / channel aluminium frame work all as specified and as directed.
S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, hold fast, Butt hinges, hold fast, lock strike plate, including PCC 1:3:6 type C1 (20mm graded aggregates) as in bed blocks for hold fasts including necessary form works, including PCC 1:2:4 type B0 using 12.5 mm graded stone aggregates as in filling of pressed steel door frame etc complete, size of frame 105x60mm incl bottom of each chowkat complete all as specified.
S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, hold fast, Butt hinges, lock strike plate, including PCC 1:3:6 type C1 (20mm graded aggregates) as in bed blocks for hold fasts including necessary form works, including PCC 1:2:4 type B0 using 12.5 mm graded stone aggregates as in filling of pressed steel door frame etc complete, size of frame 125x60mm incl bottom of each chowkat complete all as specified.
S & F 35 mm thick 2nd class hardwood partly glazed and skeleton and party panelled shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for windows, ventilators,etc complete, size of member of shutter as spd in SSR Part -I, Sec 8, clause 8.24 (b).
Material and labour for 30 mm thick flush shutters, solid core construction, with block board core and covered with decorative face veneer with lipping/frame to match on both faces complete all as specified and as directed by Engr-in-charge.
Material and labour for preparation of new steel surfaces over 10 cm girth and applying two coat of synthetic enamel painting over a coat of zinc primer complete all as specified and as directed by Engr-in-charge.
Hacking out old broken glass any thickness size quality or description including punching or drilling out old glazing fixing sping /clips all as specified and as directed by Engr-in-charge.
Supply and fix 4mm thick figured glass, pin head type and glazing, in squares n exc 0.50 sqm in each pane complete all as specified and as directed.
Taking down and Refixing wooden shutters of any description exc 1 sqm each but n.exc 2 sqm including re-securing or easing and adjusting in same opening complete all as specified and as directed by Engr-in-charge.
Supply and fix in repairs locks, cupboard, grade I, size 50 mm with 2 levers complete all as specified and as directed by Engr-in-charge.
Supply and fix in repairs 75mm size hasp and staple, mild steel, wire type, stone enamelled black including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engr-in-charge.
Supply and fix in repairs 19mm dia curtain rails, anodised aluminium alloy with fixing brackets, stops rollers etc., complete all as specified and as directed by Engr-in-charge.
S&F in repair door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg etc complete all as specified & directed.
Supply and fix Stainless steel Plate rack of size 780mm x 910 x 250mm (31"x36"x10") with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of grade AI SI-304 and fixed in repairs complete all as specified and as directed by Engr-in-charge.
Taking down steel rolling shutters gear operated or manual operated rolling shutters replacement of weared parts spring laths etc, crank handle ,bearings,crank shaft etc suitable sizes including any welding required where required and refixing at any height including greasing.(replacement parts measured seperately)
M&L for providing and fabricating mild steel 1. 0 mm thick black sheet as in top cover of rolling shutter fixed to wall in proper size ,shape & position suitable for rolling shutter complete all as specified .
S&F in repairs MS spring for rolling shutter size of spring 450 mm long inner dia not less than 65 mm and MS wire 6mm as approved .
S&F in repairs MS pipe heavy duty of 40 mm dia as in shaft of rolling shutter complete all as approved.
S&F lath section formed from cold rolled strip 1.25mm thick and width as required all as approved .
S&F guide channel 25mm width, depth of channel 65mm not less than 1.0mm thick as required.
Material and labour for one coat of synthetic enamel painting on old painted steel surfaces of any description, not otherwise described over 10cm width or girth including preparation complete all as specified and as directed by Engr-in-charge.
Material and labour for preparation of old decorated surfaces of walls by by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent walls and trading oil and greasy spots and applying one coat of cement based paint white or tinted complete all as specified and as directed by Engr-in-charge.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the permises etc complete all as specified and as directed by Engr-in-charge.
Material and labour joint free non skid ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-charge.
All as per item No 74 here-in-before but glazed ceramic colour tiles of 7-8mm thick as on skirting/ dado over 10mm thick cement plastering in CM 1:3 complete all as specified and as directed by Engr-in-charge.
Material and labour for light shade vitrified ceramic coloured tiles10mm thick (square/ rectangular) polished area of each tile n.exc 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-charge.
All as per item No.76 here-in-before but on vertical surfaces over 10mm thick screed plaster in CM 1:3.
Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in kitchen platform, floors, aprons etc
M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:4
Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations
Dismantling wall/ceiling board any thickness including cover fillets
S & F in repairs Anodised aluminium snap grid frame work of size 605 x 605mm, for false ceiling, including necessary fixing arrangement with ceiling all as specified
S & F Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions
M & L for preparing new false ceiling of gypsum board surfaces and applying two coats of plastic emulsion paint over one coat of primer complete all as specified and directed
S&F in repair 150mm size (overall length of cover plate) floor door stopper aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and directed
Green Ray Technologies
RD ENTERPRISES
K R ENTERPRISES
R.P.TRADERS
C SRINIVASAN
BALA BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .