REPAIR TO FENCING SECURITY WALL STEEL GATE AND PAINTING TO SECURITY WALL UNDER GE NORTH AKHNOOR

Amount

Dismantling of existing Steel/Wooden posts and struts, any sections embedded in concrete/hard core including taking out embedded portion and making good disturbed ground complete all as specified and as directed by Engineer-in-Charge. Notes : - This item shall also include the demolition of foundation concrete/hard core and taking out the posts and struts carefully and removing the same from site.

Mild steel work conforming to Fe 290 Gde E-165 as in posts and struts etc in fencing including cutting tops to shape as directed, drilling holes, notching for wire, flat iron fillets (for securing barbed wire etc) including all necessary drilling, bolting or riveting etc and similar work complete all as specified and as directed by Engineer-in-Charge.

All as per item no 2 here-in-above but fixing only.

PCC 1:3:6 type C-1, using 20 mm graded stone aggregate, as in benching and coping, bed plates and similar work etc including necessary form work all as specified and as directed by Engineer-in-charge.

Cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified.

Dismantling/taking down barbed wire from the existing angle iron fencing posts and neatly coiling on rough drums for re-use or removing from the site complete all as directed by Engineer-in-Charge.

Galvanised 2 strand, steel barbed wire 2.24 mm dia, barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to mild steel fencing posts, any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel nibs, pins complete all as specified and as directed. Note : (i) Each line of barbed wire to be measured seperately. (ii) Measurement of barbed wire during payment shall be as per "Weight by BOO"

All as per Srl item No. 7 here in before but using old wire including restraining, resecuring including making good staples etc. complete all as specified.

Concertina coil 600mm dia / 56 loopse / 2.5 mm core wire, Coil Diameter: 600 mm, Type of Strip: Heavy Galvanised (IS:1703), Type of Core wire: Heavy Galvanised (IS:280-2006), Core wire Diameter: 2.50 mm Dia, Zinc Coating to Strip: Minimum 200 GSM/sqmm, Zine Coating on wire: Minimum 275 GSM/sqmm (IS 6745-1972 reaffirmed 2006), Tensile Strength of wire 1400-1500 N /sqmm, Weight: 6-8 Kg (± 5%), Number of Loops: 56. Blade Length: 22 MM, Barb Profile: Medium Blade (MBBT), Distance Between Barb. 35 mm, Stretchable length 6-8 mtrs, Type of clip: Hardened Steelin Galvanised steel, complete all as specified & directed. Note: Measurement of concertina coil during payment shall be as per "Weight by BOO"

Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth using integral water proofing compound including taking down cement plaster of any description complete all as specified and as directed by Engineer-in-Charge Note :- WPC Shall be measured and paid separately.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge.

Preparation of old plastered or unplastered surfaces of walls and applying one coats of cement base paint complete all as specified and as directed by Engineer-in-Charge.

Site clearance for fencing, plastering and painting to faciliate working area coming under cutting and filling shall be cleared of shurbs, vegetation, grass, bush, weed, trees and sapling not exceeding 30cm in girth measured at height of 1 Mtr above ground level and useless material disposed off up to a distance of 50 mtr complete all as specified and directed.

Preparing new treated surfaces for beam projection etc of any type of projection (plastered or unplastered surfaces) and applying two coat of apex paint all as specified and directed.

Preparing old treated surfaces for beam projection etc of any type of projection (plastered or unplastered surfaces) and applying one coat of apex paint all as specified and directed.

Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified.

Brick work with Sub Class ‘B’ burnt bricks (Old size bricks) straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 complete, all as specified.

All as per Srl item No 17 here-in-before but except Bricks.

Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth using integral water proofing compound and two coat of cement base paint over one coat primer complete all as specified and as directed by Engineer-in-Charge. (Note:- WPC shall be measured and paid separately)

Supply of liquid water proofing compound.

Preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and apply two coats of Synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

Preparation of old steel surfaces of any description over 10 cm in width or girth not otherwise described and apply one coats of Synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Dismantling of existing structural steel work including doors, gates but excluding framed truss etc. Embeded in concrete /hard core incl taking out embeded portion and making good disturbed ground complete all as specified and directed by Engineer-in-Charge.

Taking down and refixing of steel gate shutters of any description exc 3.00 Sqm and n. exc 5.00 Sqm complete all as specified and directed by Engineer-in-Charge.

Mild steel work conforming to Fe 290 Gde E-165 as in Framed work in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-Charge.

S and F Welded steel wire fabric weight not exc. 4.0 kg/sqm complete to wood or steel members all as specified and directed by Engineer-in-Charge.

PACHNANDA BUILDERS

JR CONSTRSTRUCTION CO.

M/S GUPTA CONSTRUCTION CO.

ASIA ENTERPRISES

M/S KARAN SINGH CONTRACTOR

M/s Sekinder Paul Sharma

bushan kumar

M/s Rajesh Kumar Contractor