Provision of toilet block and bathroom block (near CHT line) and Special repair of Bldg No. P-92 and P-96 (single living accn of JCOs/NCOs) of certain unit under GE (East) JRC

Amount

Demolition brick work built in cement mortar including all quoins, arches, pillars, etc. of any description incluidng precast cement concrete, complete all as specified and as directed.

Material and labour for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.

Material and labour for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:4) complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster of any description on brick/ stone wall including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on fair faces of brick wall or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick wall or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).

Supply only integral water proofing compound complete all as specified and directed.

Material and labour for 5mm thick in cement mortar (1:3) as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour preparation of new plastered surface of ceilings and applying three coats of white washing complete all as specified and directed.

Material and labour preparation of new plastered surface of walls and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of new plastered or un-plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer and one coat of birla white putty complete all as specified and directed.

Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

Material and labour for complete removal of existing treatment from wall surface, washing rubbing down and stopping of distempered and painted surfaces and applying two coats of oil bound distemper over a coat of chalk whitening complete all as specified.

Material and labour for complete removal of existing treatment from wall surface, washing rubbing down and stopping of painted surfaces and applying two coats of white wash complete all as specified.

Material and labour for complete removal of existing treatment from ceiling surface, washing rubbing down and stopping of painted surfaces and applying one coat of white wash complete all as specified.

Material and labour for complete removal of existing treatment from wall surface by scraping washing rubbing down etc and applying two coats of cement base paint complete all as specified.

Material and labour for preparation of old treated wooden surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old painted steel surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling of brick tiles single layer as in roof covering all as specified and directed.

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed

Material and labour for PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in benching, roof padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges complete all as specified and directed.

Material and labour for 10mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning the roof top by water etc complete all as specified and directed.

Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all protrusion to made surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ micro-concrete/ general purpose grout as recommended proportionally as per recommendation of manufacturer. Making of goll as at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acrylic of cement weight all as specified and directed. Make : Asian Paints/ STP/ Sikka

Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/ brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin : Harder) application with 100% water dilution and pure polyurethane application in 2 coats with a total min consumption of 1.25 Kg/Sqm all as specified and directed. Make : Asian Paints/ STP/ Sikka Note : Application should be done with Graco sprayer by a company authorised applicator.

Demolition of cement concrete in ground floor and paving n.exc. 15cm thick (below or above ground level) complete all as specified and directed.

Material and labour for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection, laid in panels including finishing the concrete surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for 50mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection, laid in panels including finishing the concrete surface even & smooth without using extra cement complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each for doors and windows complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each for doors and windows complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and n.exc. 2 sqm each complete all as specified and directed.

Material and labour for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.

Material and labour 35mm thick 2nd class hard wood factory made plain framed, paneled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour for 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Supply and fixing steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed skeleton shutter ERW sec 50mm x 20mm and 1mm thick with two openable leaf consisting two No sash bars of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four No for each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mm x 3mm made to shape-04 No per window. (b) Handle of z section 20mm x 25mm, 100mm long 01 No per leaf (c) MS tower bolt 150mm long- 2 No per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 No per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note:- Grills/ guard bars, glass, wire mesh and painted shall be measured and paid separately under respective item of this BOQ.

All as per ser item No. 36.00 but gauged shutters without sash bars.

All as per ser item No. 36.00 but as in ventilators

Supply and fixing mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing floor door stopper (double) of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 140/ 150mm complete all as specified.

Supply and fixing galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Material and labour for mild steel sliding door bolts 250mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Supply and fixing 100mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing 100mm size stainless steel butt hinges for fixing to PVC doors complete all as specified and directed.

Supply and fixing MS barrel tower bolt 200mm long stove enameled black with bright bolt and fixed complete all as specified and directed.

Supply and fixing MS pressed handles, oval type, stove enameled black 150mm size complete all as specified and directed.

Supply and fixing extruded aluminium alloy handles, fabricated type, anodised, D-type, 150mm size, all as specified and directed.

Material and labour for preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing aluminium anodised barrel tower bolts of extruded section 200mm long fixed with machine screws, complete all as specified and directed.

Supply and fixing aluminium anodised barrel tower bolts of extruded section 150mm long fixed with machine screws, complete all as specified and directed.

Supply and fixing aluminium anodised bow handles 150mm size fixed with machine screws, complete all as specified and directed.

Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed.

Material and labour for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

Material and labour for 3mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 sqm in each pane complete all as specified and directed.

Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles of size 300 x 450 x 6-7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick rendering in cement mortar (1:4) and finishing the surface fair and even to receive tiles complete all as specified and directed.

Material and labour for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but n. exc. 0.18 Sqm as in vertical surfaces such as skirting/ dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 10mm thick in cement mortar (1:4) for laying floor finishes complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles of size 400 x 400 x 6 to 7mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Material and labour for Granite (of any type) 18 to 20mm thick machine cut, bedded and jointed with gray cement slurry and pointed with white cement with admixture of pigment to match the said of granite stone as in vertical surfaces including 10mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

Demolition of reinforced cement concrete in ground floors and paving n. exc. 15cm thickness (reinforcement to cut as required to facilitate demolition) complete all as specified and directed.

Material and labour for reinforced cement concrete nominal mix in (1:2:4) type B-1 (using 20mm graded stone aggregate) as in slab support on walls, beams and columns in floors, roofs, landings balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for reinforced cement concrete nominal mix in (1:2:4) type B-1 (using 20mm graded stone aggregate) as in foundation, including rafts, footings, foundation beams, plinth beams, mass concrete and bases for columns etc complete all as specified and directed.

Material and labour for reinforced cement concrete nominal mix in (1:2:4) type B-1 (using 20mm graded stone aggregate) as in columns, pillars etc complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

All as per Srl item No 68.00 but 5mm dia and over upto and including 10mm dia inserting, spacers and binders.

Material and labour for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such roof slabs, floor slabs, shelves, landings and similar work, not exceeding 200mm thick (horizontal or slopping) rough finished surfaces of concrete flat or shelfs etc. complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide for rough finished surfaces of concrete complete all as specified and directed.

Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs etc also splays between floors and beams Complete all as specified.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, for rough finished concrete surfaces complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular in rough finished surfaces of concrete complete all as specified.

Supply and fixing 30mm thick factory made PVC flush cupboard shutter consisting of panel of hollow section thickness consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mm x 19mm MS tubes inserted horizontally inside the hallow profile section at an equal distance from top and bottom of door and fixed with hallow profile section using 5mm thick PVC sheet using screws hollow PVC profile shall be lipped with 10mm (5mm x 2) thick x 20mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof water proof and fire retardant prelam PVC sheet using solvent cement on both the sides of the panel etc complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections complete all as specified and directed.

Material and labour for 15mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Material and labour for 20mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Material and labour for 25mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Supply and fixing in repair stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and directed.

Supply and fixing stop valves 15mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for union and fixed in repairs complete all as specified and directed.

Supply and fixing in repair 15mm angle/ stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle screwed at two right angles ends for both iron pipe complete all as specified and directed.

Supply and fixing in repairs bib taps, cast copper alloy, chromium plated, fancy type, screwed down, screwed for 15mm bore iron pipe complete all as specified and directed.

Supply and fixing in repair Orrisa pattern WC in ground or first floor vitreous china white of size 580mm x 440mm fixed including provision of lime concrete bedding and 'P' trap and breaking up of existing damaged WC seat and connecting flush pipe etc complete all as specified and directed.

Supply and fixing vitreous china white wash down water closet pan (Pedestal Pattern) with trap and fixing bolts (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc. and making good to floor/ disturbed surfaces including dismantling the existing unserviceable water closet complete all as specified and directed.

Supply and fixing vitreous china wash down water closet pan (pedestal pattern) floor mounted WC bowl for coupled WC with PP soft close seat cover, hinges fixing, accessories and accessories set size 410 x 720 x 800mm P trap 180mm and cistern with cistern fitting for 81751P & 81751S complete all as specified and directed. Make : Jaquar VGS-WHT-81751P Bowl for Coupled WC & VGS-WHT-81201 Cistern or Equivalent

Supply and fixing PVC white low level flushing cistern 10 litre capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, PVC short bend etc. fixed on existing brackets fixed in repairs complete all as specified and directed.

Supply and fixing PVC connection fiber, reinforced 45 cm long 15mm in size with brass check nut and PVC washers at both ends complete all as specified and directed.

Supply and fixing in repair health faucet (ABS body) mild steel chromium plated suitable for 15mmdia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Supply and fixing in repair soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified.

Supply and fixing Acrylic corner set of 3 pieces as per sample approved by Engineer-in-Charge all as specified and directed.

Supply and fixing rotational moulded polyethylene water storage tanks, 1000 litres capacity, (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in position including dismantling of existing tank of any description all as specified and directed.

Supply and fixing pillar tap, cast copper alloy chromium plated, with capstan heads, 15mm bore dia of pipe screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

Supply and fixing in repair pillar tap, cast copper alloy chromium plated, with capstan heads, 15mm bore dia of pipe screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

Supply and fixing in repair brass chromium plated shower rose of 125mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.

Supply and fixing in repair vitreous china wash hand basin, white, flat back size 550 x 400mm including one number brass CP waste coupling, 32mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

Supply and fixing in repair sink made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm (minimum) including PVC waste pipe complete all as specified and directed.

Material and labour in repair 25mm dia powder coated mild steel curtain rod, fixed with & including MS powder coated hooks/ brackets and decorative finials (at both side), shade as approved by GE complete all as specified including fixing of long size rawl plugs in wall for MS hook fixed complete all as specified and directed.

Material and labour for 75mm PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed with solvent cement fixed in repairs complete all as specified and directed.

Demolition and breaking up drain pipes (Salt Glazed ware, AC or PVC) in event n.exc 150mm dia including all fittings complete all as specified and directed.

Supply and fixing PVC (SWR) rain water pipes single socketed in any length with rubber ring joints laid in floors 110 mm bore complete all as specified and directed.

Supply and fixing PVC (SWR) rain water pipes single socketed in any length with rubber ring joints laid in floors 75 mm bore complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 110mm bore all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 75mm bore all as specified and directed.

Supply and fixing PVC (SWR) vent cowl 110mm bore all as specified and directed.

Supply and fixing brass chromium plated tubular towel rail 20mm dia, ‘D’ type, 600mm long between flanges fixed complete all as specified and directed.

Supply and fixing in repair mild steel CP grating 125mm dia with centre hole complete all as specified and directed.

Material and labour repairing of RCC projections, chajjas, roofs, fascia etc by necessary preparation, scarping, cutting, chiseling de-rusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces with cement concrete (1:1½:3) using 12.5mm graded crushed stone aggregates and reinforcement with expended metal/ welded mesh of weight exc. 2 kg per sqm but n. exc. 3 kg per sqm with ot without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n. exc. 5 sqm each and thickness of RCC member n. exc. 70mm including necessary form work and applying two coats of cement base paint of tint matching with the existing surfaces; work in building at any height as required complete all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Surface dressing not exceeding 15cm deep in soft/ loose soil including removing bushes/ small trees etc complete all as specified and directed.

Excavation in trenches in soft /loose soil, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundations etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and getting out complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick each layer complete all as specified and directed.

Removing excavated soil to a distance n.exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate) as in foundation, filling & mass concrete, sub base to floors etc complete all as specified and directed.

Material and labour for 75mm thick PCC (1:2:4) type B-2 (using 40mm graded stone aggregate) as in sub floors, sub base; concrete surfaces finished fair & even to receive topping floor finish/ layer complete all as specified and directed.

Material and labour for 100mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate), as in sub floors, sub base, hard standing, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified and directed & directed.

Material and labour for 25mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in sub floors, sub base; concrete surfaces finished fair & even to receive topping floor finish/ layer complete all as specified and directed.

Material and labour for 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete (1:2:4) type B-0 complete all as specified and directed

Material and labour for approved earth filling including spread and levelled in layers not exc 25 mm thick watering and rammed to a true surface complete all as specified.

Material and labour for hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Supply and fixing vitreous china bowl urinal, full stall, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including and fixing of flush pipe, grating with waste coupling and union for discharge pipe, waste pipe, spreader etc, complete all as specified and directed.

Supply and fixing ball valve brass high pressure with polythene float and fly nut complete screwed for 20mm bore dia of iron pipe or brass ferrule and fixed complete all as specified and directed.

Material and labour for sand cushion 30mm thick and well ramming including watering as required complete all as specified and directed.

Material and labour for 60mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over complete all as specified and directed. Note :- The sample shall be got approved from the GE before build procurement and lots shall be got tested independently by the GE.

Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete all as specified and directed.

Material and labour for providing precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chaajas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

Material and labour for Cutting into existing manholes for connecting new drains by cutting out existing benching for forming branch, channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 and making good pipe, and reforming benching as required finishing even and smooth for 150 mm bore pipe complete all as specified.

Material and labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200mm bore pipe complete all as specified and directed.

Material and labour for 150mm bore reinforced concrete pipe, class NP3, laid and jointed with collars complete all as specified and directed.

Material and labour PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling, post holes, mass concrete, surface channels, drains and other similar works complete all as specified and directed.

Supply and fixing 20mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed in repairs complete all as specified.

Supply and fixing 25mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed in repairs complete all as specified.

Cutting existing GI tubing of size 25 to 32mm dia in position at two sections for taking new connection including making thread on pipe in position, inserting new tee provision and fixing of union complete jointing the cut pipe all as specified and directed.

Taking down carefully existing point wiring of any type/ any size (ie on wooden/ batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point etc including removing switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, switch board outlets with sheets and other materials from site for refixing of serviceable light and for taking credit of unserviceable light as per Sch of credit and making good disturbed surface walls, roof, floors etc with any type of civil work involved complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (nominal area), 1100 volt grade PVC insulated FRLS type multi stranded copper conductor cable drawn in and including concealed rigid PVC conduit medium grade (ISI marked) not less than 20mm dia with accessories including cutting chases for laying of conduit/ fixing of boxes in walls/ floors etc including making good to disturbed surfaces as per adjoining specification and terminated in concealed terminal boxes including MS concealed terminal boxes with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with washers and earth continuity PVC insulated FRLS type cable with stranded copper conductor of size 1.5 sqmm (nominal area) green colour as earth wire connected with earth dolly for one light/ fan point controlled by one switch complete all as specified and as directed.

All as per srl item No 138.00 here-in-before but one socket outlet 5 Amp controlled by one switch on independent board.

All as per srl item No. 138.00 above but for one socket outlet 5 Amps on same board with other switches.

All as per srl item No. 138.00 above but one bell point controlled by one bell push.

All as per srl item No. 138.00 above but one light point controlled by two way switches

All as per srl item No. 138.00 here in before but with 2.5 Sqmm (nominal area) FRLS cable for one 3 pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed.

Supply and fixing switch piano flush type, 5/6 Amps, 240 Volt AC single pole, one way complete all as specified.

Supply and fixing switch piano flush type, 6 Amps, 240 Volt AC single pole, two way complete all as specified.

Supply and fixing switch piano flush type, 16 Amps, 240 Volt AC single pole, one way complete all as specified.

Supply and fixing socket outlet 2-in-1, 5 pin, 6 Amp, flush type complete all as specified.

Supply and fixing socket outlet multipurpose 2-in-1, 5/6 pin, 6 & 16 Amps, flush type complete all as specified.

Supply and fixing ceiling rose surface type PVC/ polycarbonate 65mm x 50mm three terminal complete all as specified.

Supply and fixing ceiling rose surface type bakelite 65mm x 50mm three terminal complete all as specified and directed.

Supply and fixing in replacement bell push switch flush type 5 Amps, SP, 240 volts complete all as specified and directed.

Supply and fixing call bell, ding dong AC single phase, 240 volts complete all as specified and directed.

Material and labour for Sub main wiring with PVC insulated cable copper conductor FRLS two single core 4 Sqmm drawn through PVC rigid non metallic conduit medium grade with all fittings including earth continuity FRLS copper conductor 4 Sqmm PVC insulated with green insulation complete all as specified. Note : Two runs of single core 4 sqmm and one run of 4 sqmm PVC insulated stranded copper conductor through PVC rigid concealed conduit shall be measured as one RM.

Supply and fixing MCB SP 6 to 32 Amps, 240V, 10 KA, B curve confirming to Osafe series of HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in Havells/ Hager/ L&T/ Siemens complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB SPN 32 Amps, 240V, 10 KA, B curve confirming to Osafe series of HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in Havells/ Hager/ L&T/ Siemens complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB SPN 40 Amps, 240V, 10 KA, B curve confirming to Osafe series of HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in Havells/ Hager/ L&T/ Siemens complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED lights fitting 1 x 20 watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

Supply and fixing lamp holder, PVC/ polycarbonate type with back plate suitable for batten fittings with matching colour back plate complete all as specified and directed.

Supply and fixing batten holder insulated body with matching colour back plate all as specified and directed.

Supply and fixing LED retrofit lamp 9W, 6500K, 220-240V, B-22 base cap complete all as specified and directed.

Taking down and refixing ceiling fan of any sweep or make, filling cavities with filler one coat after cleaning, painting the complete fan (as per previous colour) using synthetic enamel paint by spraying including replacement of flexible wire, rubber reel, nut, bolts etc. and re-fixing in original position complete all as specified and directed.

Supply and fixing five step fan regulator, electronic type, single phase, including connecting complete all as specified and directed.

Material and labour for sheet metal DB for MCBs, SPN, 8 ways, double door, single phase, with 200 Amps rated bus bar, neutral bar/ connectors suitable copper thimbles, lugs etc complete all as specified. Make: EKINOX3 series of Legrand/Acti 9 metalic series of Schneider/ Optipro of Indoasian/ Osafe of HPL/ Metallica of Havells/ Hager/ L&T/ Siemens

Material and labour for sheet metal DB for MCBs, SPN, 6 ways, double door, single phase, with bus bar, neutral bar/ connectors suitable copper thimbles, lugs etc complete all as specified. Make: EKINOX3 series of Legrand/Acti 9 metalic series of Schneider/ Optipro of Indoasian/ Osafe of HPL/ Metallica of Havells/ Hager/ L&T/ Siemens

Supply and fixing energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 35 watt LED for bldg security lights with high efficiency electronic driver BIS approved, having IP-66 protection, surge protection operative on AC supply 140 volts to 270 volts pre-wired with GI pipe of 25mm bore and MS clamp duly painted with two coats paint all as specified and directed.

Earthing complete in replacement with galvanised steel earth plate electrode 60cm x 60cm x 6.0mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level with the top edge of electrode not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and incl GI lead protection pipe of GI light grade 15mm dia upto 7.5 mtrs and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, salt all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing point with PCC chamber and RCC cover in 1:2:4 complete with any type of earth work involved all as specified and directed and testing on completion. Note : PCC Chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.

Supply, laying, jointing and testing XLPE insulated, PVC sheathed galvanised steel strip or wire armoured electric power cable 1100 volt grade (heavy duty) with stranded aluminium conductor of size 25 Sqmm, 4 core laid in trenches, in floor, in duct, through pipes/ culvert or along the pole/wall complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated, PVC sheathed galvanised steel strip or wire armoured electric power cable 1100 volt grade (heavy duty) with stranded aluminium conductor of size 16 Sqmm, 4 core laid in trenches, in floor, in duct, through pipes/ culvert or along the pole/wall complete all as specified and directed

Supply, laying, jointing and testing XLPE insulated, PVC sheathed galvanised steel strip or wire armoured electric power cable 1100 volt grade (heavy duty) with stranded aluminium conductor of size 6 Sqmm, 2 core laid in trenches, in floor, in duct, through pipes/ culvert or along the pole/wall complete all as specified and directed.

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length complete all as specified and directed.

Material and labour for sand cushioning with 8cm thick layer of sand before laying of cable and 15cm thick after laying of cable in trenches and punned down complete all as specified and directed. Note :- Punned down thickness of 18cm will be measured.

Supply and fixing 50mm bore galvanised pipe light grade fixed along poles/ to walls/ laid under floor complete with and including fittings and clamps as required complete all as specified and directed.

Supply and fixing 40mm bore galvanised pipe light grade fixed along poles/ to walls/ laid under floor complete with and including fittings and clamps as required complete all as specified and directed.

Supply and fixing 25mm bore galvanised pipe light grade fixed along poles/ to walls/ laid under floor complete with and including fittings and clamps as required complete all as specified and directed.

Supply and fixing LED light fitting 1 x 9/10 watt bulk head luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply & fixing exhaust fan, 300mm sweep, 900 rpm, single phase, 230 volt, heavy duty, with lowered shutter including provision of three core flexible cable of required length of size 23/.0076 from ceiling rose/ connector to fan terminal, fixing the fan on wall with suitable size of nut, bolt & washer, including making the hole in wall incl necessary civil/ plastering work to match the disturbed surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for cutting holes for exhaust fan of size 300mm dia sweep in brick walls built in cement mortar and stone walls built inline mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, complete all as specified and directed.

Supply and fixing electric water heater, storage type steel body and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV etc. complete all as specified and directed. Make : Havells/ Venus/ Racold/ Crompton Greaves

Material and labour for PVC connection for water heaters with PVC flexible pipe 15mm dia 450mm long, suitable for hot water size with 2 Nos connection and washers complete all as specified and directed.

Supply and fixing in repair MCB TPN 63 Amp, 10 KA, B curve as per Osafe series of HPL/ Acti 9 series of Schneider/ Siemens/ ABB/ Havells complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair TPN double door DB 4 way with earth Bus Bars, Neutral Links, blanking plates suitable for fixing of TPN upto 63A as incommer and MCB for outgoing fixing in wall complete all as specified and directed. Make : Siemens/ Legrand/ Schneider/ Havells/ Indoasian

Supply and fixing in replacement MCCB 100 Amp, 415 V, 16 KA, 4 pole fixing type with breaking capacity complete all as specified and directed.

Supply and fixing in repair VTPN DB 8 way double door, suitable for MCCB 100 Amp, having copper bus bar for neutral and earth, blanking strips complete all as specified and directed.

SARASWATI CONSTRUCTION CO

M/S RAJESH CONSTRUCTION COMPANY