Widening and Strengthening of Ratanmai To Amethi Border Via Mahuli Makoonpur Laulipokhta Kham Road (ODR) in District Pratapgarh

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. As per MORTH clause 3.16 & 305 incluidng labour cess (Excluding GST)

Excavation for roadwrok in soil with hydraulic excavator including cutting and loaidng in tippers trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections and transporting to the embankment location within all lifts and lead upto 1000m. As per MORTH Spec. No. 3.06 (301)

Construction of sub grade and earthen shoulders with approved materials obtained from borrowpits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 As per MORTH Specification No. 3.18, (305) including labour cess etc. (Excluding GST)

Construction of Embankment with material deposited from Roadway cutting: Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundaton of other structures graded and compacted to meet requirement of Tabel 300.2 including labour cess etc. (Excluding GST)

Construction of granular sub-base by providing coarse graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 As per MORTH Specification No. 4.01 (401) including labour cess, Royalty etc. Quarry form Shankargah (Excluding GST)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. As per MORTH Specification No. 4.14 (406, B) including labour cess, Royalty etc. (Excluding GST) Quarry form Madihan (Excluding GST)

Providing, laying and spreading and compacting graded stone aggregate to wet mix macadem specification inculding Premixing the matreial with water at O.M.C. with 1% cement (OPC) and 3.5% bitumen emulsion (SS-2) in mechnical mix palnt (pag mil) carriage of mixed material by tipper to site. Laying in uniform layer in sub base/base coarse on well prepared sub base and compacting smooth wheel roller of 80-100 KM To achive desired density including, lighting barricating and maintence and diversion as table no. 400.11/ 400.12 and technical specification no. 406 including labour cess, Royalty etc. Quarry form Madihan (Excluding GST)

Providing and laying dense graded bituminous macadam(50 mm) with higher capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction. As per MORTH Specification No. 5.4 (505, B) including labour cess, Royalty etc. Quarry form Dala (Excluding GST)

Providing and applying tack coat-2 with bitumen emusion using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bitumenous surface cleaned with mechanical broom. MORTH No. 5.02 (503-I) (Excluding GST)

Providing and laying bituminous concrete with higher capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 percent of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and aligment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction As per MORTH Specification No. 5 (507, B) including labour cess, Royalty etc. Quarry form Dala (Excluding GST)

Earth work in excavation of foundation of structures as per drawing and technical specification, including, setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved materials. As per MORTH Spec. No. 9.01 (304, B(I) including labour cess etc (Excluding GST)

Providing and Laying 40mm. Guage ballast with stone dust Complete as per in foundation including labour cess etc (Excluding GST)

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compaced by vibration including curing for 14 days. As per MORTH Specification No. 9.03 (304) including labour cess, Royalty etc (Excluding GST)

Supply and Laying of 350 mm dia H.P. NP3 Including cartage upto site laying with coller joint filling in cement mortor with Jute, labour T&P etc. including labour cess, Royalty etc (Excluding GST)

Supply and Laying of 600 mm dia H.P. NP3 Including cartage upto site laying with coller joint filling in cement mortor with Jute, labour T&P etc. including labour cess, Royalty etc (Excluding GST)

Supply and Laying of 1000 mm dia H.P. NP3 Including cartage upto site laying with coller joint filling in cement mortor with Jute, labour T&P etc. including labour cess, Royalty etc (Excluding GST)

RCC Grade M20 using batching plant transit mixer & manual placing. As per MORTH Specification No. 12.08 (1500, 1700, 2100-C, Case-i) including labour cess, Royalty etc (Excluding GST) (for U-drain)

Reinforced Cement Concrete work with cement,approved coarse sand and 2 cm. gauge approved stone ballast in proportion of M 25 in structure excluding supply of reinforcement and its bending but including its fixing bending the same with 24 B.W.G.G.I.binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and T&P etc. required for proper completion of the work.Binding wire cost being included in the item. (800-II) including labour cess, Royalty etc (Excluding GST) (for Extension culvert and Box Culvert)

Supply, fitting and palcing uncoated HYSD bar reinforcement in foundation complete as per drawing and technical specification. As per MORTH Specification No. 12.42 (1600) including labour cess etc (Excluding GST)

Providing weep holes in brick masonry/Plain/ Reinforced concrete abutment, wing wall/Return wall with 100 mm dia AC Pipe, extending through the full width of the structrure with slope of 1V:20H to wards drawing foce. Complete as per drawing and Technical specification. 2706 & 2200 including labour cess, Royalty etc (Excluding GST)

Brick Masonry work in cement mortar 1:3 in foundation complete excluding pointing and plastering as per drawing and Technical specification. As per MORTH Specification No. 15.04 (1300) including labour cess, Royalty etc (Excluding GST)

Pointing with cement mortar (1:3) on brick work in substructure as per technical specification. As per MORTH Specification No. 15.08 (1300 & 2200). including labour cess, Royalty etc (Excluding GST)

Plastering with cement mortar (1:3) on brick work in substructure as per technical specification. As per MORTH Specification No. 15.09 (1300 & 2200). including labour cess, Royalty etc (Excluding GST)

ARUNIMA CONSTRUCTIONS

M/s Raj Laxmi Enterprises

M/S A.S.TRADERS

M/S LUCKY TRADERS

M/s Uma constractor

M/S DEEPAK KUMAR AGARWAL

M/S SRI JAN CONSTRUCTION