SPECIAL REPAIR TO BLDG NO P 215 B BLOCK AT MILIT GIRINAGAR PUNE 25

Amount

B/R WORKS Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided including floor finishes complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each complete all as specified and directed.

Cutting opening, through brick walls for door, window and other openings, or enlarging existing openings, converting into door openings, including finishing to jams, sofits etc. or cutting out defective brick work for under pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks hard-core etc to store and rubbish not exc. 50 m making good to disturbed portion to mathc with existing surface complete all as specified & directed.

Forming jambs etc to opening including cutting toothing and properly bonding into old work including facing and pointing (if necessary) to match existing work complete in CM 1:4 complete all as specified and directed.

S & F Machine cut cuddappa stone slab one side polished 20 to 25mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 20mm screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:3 mixed with 3% WPC by weight of cement to sunken portion incl walls of sunken portion with proper slope towards outside and finished the surface even and smooth without using extra cement complete all as specified & directed. Note: Water Proofing compound of approved make shall be measured and paid for seprately as "Supply Only"

M&L for Applying evenly a tack coat of hot blown bitumen 85/25 grade in two coats, one coat on plastered surface and 2nd coat on polyetthlene film @ 1.50 Kg/Sqm each complete all as specified and directed. Note : -Polyethylene film shall be measured and paid separately.

Supply and paste polyethylene film 150 micron thick (weight not less than 1410 gms per 10 Sqm) complete all as specified and directed.

M & L cement concrete in floor filling 1:5:10 E-2 (using 40 mm graded stone aggregate) as in for filling in sunken floors including removal of existing treatment complete all as specified and directed.

Supply only integral water proofing compound of approved make complete all as specified and directed..

M&L for vitrified light shade ceramic tiles 10 mm thick polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per tiem No 13.00 but in skirting and over and including 10mm cement backing in CM 1:4 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 450X 350X 7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as directed & directed.

M&L Kota stone flooring 20 to 25 mm thick laid, jointed with grey cement slurry and pointed with coloured cement to match the shade of Kota stone as in floor etc including rubbing and mirror polishing laid over and including screed bed 20mm thick in CM 1:6 complete all as specified and directed.

M&L for mirror polished Kota stone slab 20-25mm thick in Tread of steps in single pieces incl two numbers of grooves of size 3mmx3mm and rounding to edge, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishing with and incl 20mm thick screed in CM(1:6) complete all as specified and directed by Engr-in-charge.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 (using 20 mm graded stone aggregate), exc. 10 cm in width and setting in CM 1:6, complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks, straigth or curved on plan to any radius in half brick thick walls buits in 1:6 CM complete all as specified and directed

Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L for two coats of OBD over a coat of primer over 3mm thick ( in two coats) wall care putty finished smooth including prepartion of new surfaces on walls complete all as specified and directed.

All as per Item No 24.00 above but on ceiling complete all as specified and directed.

M&L for complete removal or existing wall treatment and applying two coats of OBD over a coat of primer over 2 mm thick ( in two coats) wall care putty finished smooth including preparing the surfaces even and smooth complete all as specified and directed.

All as per Item No 26.00 above but on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of apex exterior emulsion (Apex ultima or equivalent) over a coat of primer over 3mm thick ( in two coats) wall care putty finished smooth on wall and including filling minor cracks wherever obsevered in wall old plaster etc complete all as specified and directed.

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and directed.

S&F factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site complete all as specified and directed.

Supply and fix aluminium (powder coated ) three track sliding window comprising of one set of fly proof shutter and two set of glazed shutter with frames of size 92.00mm x31.75mm x 1.50mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement all as specified and directed. (Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint(Make of Aluminium Sections powder coated : Jindal or equivalent of INDAL).

Supply & fix aluminium (powder coated) ventilator shutters, fixed with out sash bars, openable type (Top hung) and glazing complete with 4mm thick coloured/tinted sheet glass with necessary clips, hinges, aluminium(anodised) peg stay 30 cm long-01 No. complete sections as above item complete all as specified and as directed.

S& F 2nd Class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

M&L for Cupboard magnet including high quality magnet and steel plate complete all as specified and directed.

S&F in repairs 18mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, ist class HW(TW) beading all around on edging to timber frame work complete all as specified and directed.

S&F continuous (Piano) hinges mild steel bright finished or electro galvanised width of flap 30mm complete all as specified and directed.

S&F 125mm cupboard handles fixed with nuts screws and washer of aluminium anodised complete all as specified and directed.

S&F Hasp and staples safety type aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws of 125mm size complete all as specified and directed.

S&F 35mm thick (factory made) 2nd class hard wood glazed and skelton shutters divided into squares with plain, chamfered or rounded, mitred and rebated sash bars prepared to receive glass, gauge sizes of members of shutters as specified in SSR Pt-I, section 8 , clause 8.20 (A) and as directed.

M&L factory made 30 mm thick Flush shutters of solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

M&L for galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm complete all as specified and directed.

M&L MS butt hinges, medium weight cold rolled mild steel and fixed size 100 mm complete all as specified and directed.

S&F aluminium alloy, anodised,sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repair complete all as specified and directed.

S/F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin complete all as specified and directed.

M&L aluminium anodised barrel tower bolt of extruded section and fixed 200mm long complete all as specified and directed.

M&L for helical door spring 300 mm long MS complete all as specified and directed.

M&L aluminum handles cast type anodised 150 mm complete all as specified and directed.

M&L for floor door stoper of aluminium alloy body complete all as specified and directed.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, bracket guard and railing 60cm long incl screws, fixed as in repair complete all as specified & directed.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf corner type three tyres with chromium plated brackets, bracket guard and railing 30cm size incl screws, fixed as in repair complete all as specified & directed.

S&F Curtain rod 25mm dia 0.80mm wall thickness, mild steel, chromium plated power coated as per sample complete all specified and directed.

S&F Brackets at suitable dead end for fixing 25mm dia curtain rods complete all as specified & directed.

S&F Brackets at suitable free end for fixing 25mm dia curtain rods complete all as specified & directed.

Taking up or down steel tubing 15mm bore complete all as specified and directed.

S&F 16mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN-16) UV stabilized welded having thermal stabilized and antimicrobial fusion welded for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

Taking up or down steel tubing 20mm bore complete all as specified and as directed.

S&F 20 mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN-16) UV stabilized welded having thermal stabilized and antimicrobial fusion welded for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity complete all as specified and directed.

S & F ovel type WHB, vitreous china, any size including provision of 20mm thick granite in one piece, cutting & fixing for one WHB platform (minimum size 0.90m X0.60M) complete with grinding, polishing, moulding complete all as specified and directed.

M&L 50mm thick sand stone slabs in shelves, chajjas, shelves etc n exc 2m in length set and pointed in CM 1:4 complete all as specified and directed.

S&F 15 mm dia 45 cm long PVC water connection with PTMT nuts and washers complete all as specified and directed.

Supply and fixing central hole Basin Mixer long nack, (Hot and cold water) without poup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.

Supply and fixing wall mixer telephonic cast copper alloy, chromium plated suitable for 15mm bore GI pipe or union, fixed as in repair complete all as specified and directed.

S&F in repair CP Bib taps cast copper alloy with crutch or butterfly handle, screwed for iron pipe of dia 15mm, fancy type fixed in repairs complete all as specified and directed.

S&F in repair angle/stop valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 600 mm long complete all as specified and directed.

S&F in repair brass chromium plated towel ring complete all as specified and directed.

S&F cloth hooks (steel hooks, 6 to 8 hooks) complete all as specified and directed.

S&F chromium plated toilet paper holder of approved make complete all as specified and directed.

S&F in repairs soap dish of approximate size-160x160x90 mm, fixed with chromium plated brass screw complete all as specified and directed.

M&L for health faucet fixed in repair of approved make complete all as specified and directed.

S&F Brass chromium plated shower rose 100mm size with or without swivel joints, anysize with shower arm including fixing to steel pipe or union complete all as specified and directed.

Supply & fixing PVC bath cabinet, size 450 x 600mm, comprising of looking glass, space for bath soaps, shampoo, tooth brush and paste, handle towel rail, fixed as in repairs complete all as specified and directed.

M&L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement outlet dia 75mm in repair complete all as specified and directed.

M&L for PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs, ISI marked (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part 1 including dismantaling of existing water tanks complete all as specified and directed.

S&F 20mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe in repair complete all as specified and directed.

S&F ball brass valves 20mm dia high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

Demolition and beaking up drain AC/PVC pipes set in cement mortar 100 mm and below complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors bore of the pipe 110 mm complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors bore of the pipe 75 mm complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall, bore of the pipe 110 mm complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall, bore of the pipe 75 mm complete all as specified and directed.

S&F PVC (SWR) bends any radius 200 mm dia with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm dia with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius 75 mm dia with access door complete all as specified and directed.

S&F PVC (SWR) junction single,(Single T) equal or unequal with oval access door bore of pipe 110 mm) complete all as specified and directed.

All as per item 90.00 above but double complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110 mm dia of approved make complete all as specified and directed..

S & F PVC (SWR) vent cowl 75mm Bore of approved make complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber rings joints, as in rain water pipes bore of the pipe 200mm complete all as specified and directed.

E/M WORKS Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials for taking credit and making good disturbed surfaces of walls, floors and roofs etc complete all as specified and as directed.

Taking down sub main wiring complete including fitting and fixtures, removing materials for taking credit and making good disturbed surfaces of walls, floors, roof etc, complete all as specified and as directed.

Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as directed & directed.

M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through heavy duty PVC casing capping fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly including concealed modular flush boxes including Modular box , modular cover plates with frame mounting for housing the switches, socket outlets etc, all as specified and directed . (a) One light point controlled by one way switch.

(b) One light point controlled by two way switch

(c) One Ceiling Fan/Exhaust point controlled by one way switch

(d) One Bell point controlled by one bell push

(e) One 3 pin switch socket outlet point 5 Amps on independent board

(f) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item No. 97.00 above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size complete all as specified and directed.

S & Fix Modular switch 1 way 6A, 1 module complete all as specified and directed.

S & Fix Modular switch 2 way 6A, 1 module complete all as specified and directed.

S & Fix Modular switch 1 way 16A, 1 module complete all as specified and directed.

S & Fix modulat Socket out let, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S & F modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S & Fix ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed.

S & Fix fan regulator electronic 2 modular type volts AC 50 HZ ,100 Watts, 4 step complete all as directed.

S & F Modular Bell push 6A 1 module

S & F call bell (Ding Dong) 240 V, 50 Hz

S & Fix Indoor decorative LED extruded aluminium batten suitable for mount LED tube rod 1 x 18 watts including necessary electric connections with flexible copper cable 23/0.0076 from ceiling rose to tube light fitting complete all as specifed and directed. Make Make-Bajaj-Cat Part No.BLRB-DB-118 or eqvt in Wipro/Crompton/Halonix.

S & Fix LED tube light rod 18 watts made of aluminium extrusion with high efficient LEDs and opal diffuser with exteranl driver, IP20, with necessary fixing arrangement etc complete all as specifed and directed. Make-Bajaj-Cat Part No.BLRB-DB 18CW LED or eqvt in Wipro/Crompton/Halonix.

S&F LED Tube light fitting 10 watt, 230 volts, sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work and retail spaces complete with all accessories all as specified & directed Make. Make. Bajaj. Cat Part No.BCLSB 10 WH or eqvt in Halonix/Crompton/Wipro

S&F LED wall bracket light fitting 14 watt, 230 volts complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. Make Havells.Cat Part No.LHFOECE1TZ1O014 or eqvt in Wipro/Crompton/Halonix

S&F LED street light 30 W CUB type building security light compact and aesthetic aluminium pressure die cast housing LED street light lumanieires with IP 66 and bracket, nut, bolt, clamp etc complete all accessories and fixing arrangement all as specified and directed. Make Make Bajaj.ENXT P 36L WH CR PC SD or eqvt in Halonix/Crompton/Wipro

S & Fix sheet metal enclosure MCCB DB VTPN double door 4 way suitable for 415 Volts with 200 amps rated bus bar including flushed on walls making good disturbed surfaces all as specified and as directed.

S & Fix sheet metal enclosure MCB TPN DB 4 ways suitable for 415 V with 200 amps rated bus bar including flushed on walls and making good disturbed surfaces complete all as specified and as directed.

S & Fix sheet metal enclosure distribustion board SPN 8 ways 240 volts with IP 43 protection and double door, suitable for mounting MCBs complete all as specified and directed

S & Fix sheet metal enclosure distribution board SPN 2 ways 240 volts, with IP 43 protection and double door, suitable for mounting MCBs complete all as specified and as directed.

S & Fix MCB single pole, 240 volts, 6 to 40 Amps, complete all as specified and as directed.

S & Fix MCB single pole & neutral, 240 volts, 6 to 40 Amps, complete all as specified and as directed.

S & Fix MCB triple pole, 415 volts, 32 to 40 Amps, complete all as specified and as directed.

S & Fix MCB triple pole & neutral, 415 volts, 32 Amps, complete all as specified and as directed.

S & Fix MCCB 4 pole, 415 volts, 16 KA, 125 Amps, complete all as specified and as directed.

M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC Casing caping fixed to walls / roofs / floors / ceiling etc with its accessories all as specified and directed for the following. (a) 2 x 2.5 sq mm and 1 x 2.5 sq mm as earth wire

(b) 2 x 6 sq mm and 1 x 6 sq mm as earth wire

(c) 4 x 6 sq mm and 1 x 6 sq mm as earth wire

Taking down and refixing of Ceiling fan, wall Mounted Fan and Exhaust fan any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint over a coat of primer after preparation of surface complete all as specified and directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store and Supply and fixing of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S & Fix PV body exhaust fan AC single phase 220 to 240 volts 900 RPM of size 250 mm sweep with fixed on wall/ventilator and fixing arrangement complete all as specified and directed

Taking down the existing electric meter of any capacity and make after disconnecting electrically and carry out the cleaning and refixing, reconnecting including of electric meter, testing in all respect for smooth running complete all as specified & directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less that 1.5 M below normal grouond level connected to GI earth wire 4 mm dia by means of nuts, bolts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No 03 of SSR Part-I connected to earthing test point / DB including excavation / earth work in any type of strata, removal of surplus earth, GI pipe for watering pipe withand funnel, PCC 1:3:6 Type C-1 chamber with 40mm thick RCC 1:2:4 type B-1 in cover slab with TMT bars 8mm dia @ 150mm c/c both way with GI protection pipe complete all as specified and directed. Note :- Cost of earth lead & protection pipe upto length of 7.5m shall deemed to be included in the quoted rate.

J.G.Goel

Sayili Enterprises