ELECTRICAL WORKS

Amount

Earth work excavation in all kinds of soils within an Initial lead of 10m and lift of 2m in trenches(Narrow pits)

Removing hardrock by wedging chisselling and trimming to proper shape where blasting is prohibited.

Dewatering the cable trench / duct using 5.00 HP diesel pumpset wherever necessary including hire charge for Tools & Plants, labour lead and lifts etc complete.

Providing crusher dust instead of sand bedding with good quality to a depth upto 150mm (6") including cost of materials, labour, leads and lifts etc.., complete

Refilling with excavated earth, consolidating in layers and the top brought for line with the existing surface including cost of labour lead lift etc.., complete.

Laying of 33 KV RCC"V"troughs over the UG cable to proper grade and alignment inside the cable trench, printing letters of not less than 75mm on either side of the troughs as directed by the Engineer incharge of works including the cost for all materials , transporting of troughs from the source to the destination upto 10kms stenciling,paints,brushes all leads and lifts etc.,complete.

Supplying and laying of 160mm. Dia PVC pipe of 6 KSC Indian standard at approved quality and reputed make for road and drainage crossing for the HT cable laying at road drainage crossing including cost of all materials , labour lead lifts etc.., complete.

Uncoiling and laying of HT cable in the excavated trench including drawing the cable through RCC/Gi/PVC pipes wherever necessary at road crossings etc.., without any damage/including transporting of cables tools and plants labour lead lift etc.., complete

Cutting the cable of required length and sealing the ends with suitable end caps for 33 KV XLPE cables, including cost of all materials, tools and paints leads and lifts etc.., complete.

Transporting of the remains of the empty cable drums (iron materials) to the stores for devolution including loading and unloading , leads and lifts etc.., complete.

Supply of erection of cable marker in RCC(1:2:4) using 20mm HBs metal of size 0.3x0.60m and of 100mm thick engraving letters "TNEB" UG cable painting the engraved letters , fixing the cable marker in a bed of PCC (1:3:60) using 20mm HBs metal of size 0. 0.45X0.3X0.45 m including cost of all materials,labour, transporting to the destination all leads and lifts etc.,complete.

Providing watch and ward required at site as directed by the Engineer incharge.

Erection of 33 KV 3X400 sqmm Straight joint kit

Erection of 33 KV 3X400sqmm Outdoor end termination kit

UG cable earthing by coil earthing

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

ponmani and co