Providing 2 No of 11kV Switchgear (MCVCB) at 66/11kV Srimangala Substation, TL&SS Division Hootagalli, KPTCL, Mysore

Providing 2 No of 11kV Switchgear (MCVCB) at 66/11kV Srimangala Substation, TL&SS Division Hootagalli, KPTCL, Mysore

11kV UG cable 3 core 240 sq.mm for connecting 11kV Bank PCVCB to 11kV feeder MCVCB

Heat shrinkable type Cable termination kit for XLPE CABLE-INDOOR-3X240 sq.mm

Heat shrinkable type Cable termination kit for XLPE CABLE-OUTDOOR-3X240 sq.mm

RCC Hume Pipe, 2000 mm Long, 150 mm Dia

Providing burnt bricks to cover on power cable

1.1 kV class Armoured Copper Cables

4core x 2.5 sqmm

1.1 kV class Armoured Copper Cables

1.1 kV class Armoured Copper Cables

19core x 2.5sqmm

6 sqmm lugs and ferrules for Copper Control cable

2.5 sqmm lugs and ferrules for Copper Control cable

50 mm Glands for Copper Control cable

DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL

11 kV GOS - D/B 400 A

Provision of 'H' frame for GOS mounting

9 kV, 10 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR

Pad Clamps for coyote

PG Clamp for Coyote to Rabbit

RCC Pole Clamp - GI

Cast Iron Pipe of 100mm ID 13 mm thickness 2.75 mtr long with 2 part clampout of G.I Flat 50x6 mm continuously welded around the pipe using casting iron welding

Multi Function Transducers(MFT)

As per KPTCL Std, Interface: RS-485 Daisy Chain to RTU Com port,wiring: Both 3ph 4wire, supply: self powered, Measuring range voltage: 120%, current: 120%, frequency: 4...

Input Vtg:110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs: 12, No of outputs: 8, Source current: 5mA, at output, 8way switch to be p...

Terminal Blocks (knife type)

(8 TB's per Feeder) = (8x2 nos = 16)

2.5 Sq-mm multistrand copper wire for CT termination

2.5 Sq-mm multistrand copper wire for PT termination

Control Cable (armored) - 10 Copper core x 1.5sqmm

(From remote contol desk to RTU) (18mtrs x 1 nos (1 cable for 2 feeders) = 18 mtrs)

Signal Cable (armored) - 10 Copper core x 0.5sqmm

Feeder to Feeder loop = 5mts x 2 nos =10mtrs)

Remote control desk to RTU (for DI):18mtrsx2 Nos.=36 mtrs

1.5 Sqmm Grey wire for interfacing of DI and DO

(20 mtrs for each panel)(20x2=40mtr)

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the size 2.5 sqmm (80 lugs/panel x 2 = 160)

C-type channel of size 50x100x50x6mm

(50cm/panel) = (0.5m x 2 nos = 1 Mtrs)

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) (Size: 32mm dia)

CT TB's - 6 nos for each panel (2x6=12 nos)

11 kV MCVCB, 500 MVA, 25 kA, 1250 A feeder.

Feeder Panel SCADA compatible

a) Erection, alignment and fixing including movement from the point of unloading to the point of erection

b) Wiring & Assistin...

11 kV MCVCB Switchgear, 500 MVA, 25kA, 1250 A feeder

Testing & Commissioning:

Identification of wires, ferruling, crimping & termination of wires for annunciation, etc., Testing of relays, CTs, PTs, B...

Annunciator Panel for Two Feeders

Adapter Panel for MCVCB [Adapter Panel (1250 A)]

11kV UG cable 3 core 240 sq.mm for connecting 11kV Bank PCVCB to 11kV feeder MCVCB

Heat shrinkable type Cable termination kit for XLPE CABLE-INDOOR - 3X240 sq.mm

Heat shrinkable type Cable termination kit for XLPE CABLE-OUTDOOR-3X240 sq.mm

Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...

1.1 kV class Armoured Copper Cables

4core x 2.5 sqmm Copper Control cable for AC supply

1.1 kV class Armoured Copper Cables

4core x 6sqmm Copper Control cable for DC supply

1.1 kV class Armoured Copper Cables

19core x 2.5sqmm Copper Control cable

DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL

11 kV GOS - D/B 400 A

Provision of 'H' frame for GOS mounting

9 kV, 10 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR

Base concreting 1:2:4, 650x650x150 mm

Pole concreting 1:2:4, 650x650x1700 mm

Coping 1:2:4 (as per actuals)

Grounding of equipment using cast iron pipe electrodes (Labour)

Grounding of equipment with 50 x 6 mm G.I. Flat and

connecting equipment to the earthmat/ground pit. Each point

of earthing with all formation works like bending, twisting,

drilling of holes and conne...

Supplying and laying of MS Flats 50x6 mm of various sizes, welding and applying ACB paint to welded portion and covering with sodium bentonite clay as per the drawing/standard specification and consol...

Supplying and spreading 100mm thick with 20/25mm jelly with all lead and lifts.

Supplying & providing 450 mm dia 450 mm height 1.5" to 2"

thick hume pipe collar (non pressure type) for earth pits

including all lead and lifts etc.,

Multi Function Transducers(MFT)

As per KPTCL Std, Interface: RS-485 Daisy Chain to RTU Com port,wiring: Both 3ph 4wire, supply: self powered, Measuring range voltage: 120%, current: 120%, frequency: 4...

Input Vtg:110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs: 12, No of outputs: 8, Source current: 5mA, at output, 8way switch to be p...

Control Cable - 10 Copper core x 1.5sqmm

(From remote contol desk to RTU)

(18mtrs x 1 nos (1 cable for 2 feeders) = 18 mtrs)

Signal Cable - 10 Copper core x 0.5sqmm

Feeder to Feeder loop = 5mts x 2 nos =10mtrs)

Remote control desk to RTU (for DI):

18mtrs x 2 Nos. = 36 mtrs

1.5 Sqmm Grey wire for interfacing of DI and DO

(20 mtrs for each panel)(20x2=40mtr)

Miscellaneous items like, Ferrules, cable ties, insulation tape, & Labour for cutting, weldind, drilling, etc

Configuration of RTU and Engineering along with validation of data at SLDC