Miscellaneous civil work at CISF Camp of Bishrampur Amgaon Sub Area

Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in possition cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level. 1:4:8(1cement:4 fine sand:8graded stone aggregate 4mm nominal size

Brickwork with Fly Ash brick of class designation 35 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand).

Brickwork with Fly Ash brick of class designation 35 in Super structure in : Cement mortar 1:6 (1 cement : 6 coarse sand).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand).

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Steel reinforcement for RCC work including stacking,cuttting, bending placing in position and binding all complet. Thermo mechaniocally treated bars.

Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

P/F pre coated galvanised iron profile sheets 0.50mm (+0.05%) total coated thickness with zinc coating 120gms per sqm as per IS:277 in 240 mps steel grade, 5-7 microns epoxy primer on both sides of sheet and polyster top coat 15-18 microns. Sheet should have protective gaurd film of 25 micron minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by E-I-C. The sheet shall be fixed using self drilling /self tapping screws of sizes (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal /vertical or curved surfaces excluding the cost of purlins,rafters and trusses and including cutting of size and shape wherever required.