Erection of 440V oh line at Phase 2 for providing power to three phase submersible pump in respect of AKKOCP, BnK Area.

Amount

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 08 meter and upto 10 meter

Supplying and erection of stay set complete (galvanized) with 19/ 20 mm dia X 1.8 meters long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supply and erection of channel iron 75mm x40 mm x6mm(7.14kg/mtr) cross arm for 3 wire 11KV OH line complete with clamp bolts and for clamping to the pole 50mm x6mm MS flats welded on one side to the channel iron and with bolts and nuts on other side for tying the cross arm together ,including drilling of holes for insulator ,pins(as per drawing) and painting with primer and finish paint as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per meter) cross arm for 2 wire overhead line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required.

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.( idle pole at mines at different location)

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required 1300 x 4 x.214 x=1112.8 Kg

Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required

Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required

8 swg GI wire (+) Erection of GI wire no 8 including binding for cradling and earth wire etc as required. (40 x2 x6 x.194=93.12 Kg)

Loading ,unloading and transporting of poles to the working site

Total impact of GST for the purpose of CTC

NATIONAL ELECTRICAL WORKS

M/S JAI MAA ENTERPRISES