ALL INCLUSIVE MAINT OF AKSHAY VIHAR AND OFFRS MD ACCN IN FORT CANTT UNDER GE (EAST) PRAYAGRAJ.

Amount

Demolition of mud in roofs any thickness and in any position and leaping over roof terrace ,removing the demolished material to a distance exc 250 m & n exc 500 m and depositing where directed at a level n exc. 1.5 m above starting point, complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in roof padding finishing the surface fair & even complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer of cement mortar 1:4 over roof slab mixed with water proofing compound (WPC to be measured and paid separately), finished even and fair, complete all as specified and directed.

M&L for preparation of PCC/RCC roof surfaces and then SBR polymer modified plaster in mixed with polymer in ratio of 1:10 (1 part of polymer and 10 parts of cement) applying priming coat of epoxy primer with resin and hardener with water dilution as per manufacturer instructions, applying two coats of solvent based polyurethane liquid membrane not less than 500 micron thick UV stable having SRI value greater that equal to 105 with consumption of 0.61 Kg/Sqm (each coat), complete all as specified and directed. Make: Nito Proof 725 of Fosroc or equivalent product of Pidilite Dr Fixit Super Latex / Asian Paints/M/s MC Bauchemie / CIPY/ SIKA / Thermax / STP. Note: (a) The work shall be carried out complete as per manufacture's specifications and application methodology. Execution shall be done with authorized trained/skilled applicator of manufacturer as per the technical guidelines laid by manufacturer. Company back guarantee of 10 years shall be given by contractor after completion of Water Proofing work before payment. (b) Ponding test for 72 Hours shall be carried out by contractor to check any instances of Leakage/Seepage, The results of successfull Ponding Test shall be certified by Engineer-in-charge and User Rep before payment.

Dismantling of asbestos cement (corrugated, semicorrugated etc) sheets in roof covering, complete all as specified and directed.

S&F prepainted coloured galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile stregnth of 550 mpa as in roof covering and cladding to wall fixed with self tapping screws, complete all as specified and directed.

S&F prepainted coloured galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to roof wall, fixed with self tapping screws,complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc, complete all as specified and directed.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, complete all as specified and directed.

M&L for 2nd class hard wood timber scantling clean swan fixed as girder, lintels, wall plates, joist purlin rafters etc, complete all as specified and directed.

M&L for rolled mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., complete all as specified and as directed.

M&L for synthetic enamel painting two coats to steel surfaces over a coat of red oxide primer including preparation of surfaces of any description over 10cm girth or width not other wise described, complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets/AC boards etc any thickness, complete all as specified and as directed.

Supply & Fix Anodised aluminium snap grid frame work for false ceiling (Size of grid 605 X 605 mm) including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.

M&L for 6 mm thick ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws.) complete all as specified and directed.

Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and as directed.

M&L for Brick work with fly ash (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6, complete all as specified and directd.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed.

M&L for rendering 5 mm thick on ceiling surfaces in cement mortar 1:3 finished even & fair, complete all as specified and as directed.

M&L for rendering 10 mm thick on other than fair faces of walls of brick work or stone surfaces in cement mortar 1:6 & finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for Rendering 15 mm thick on fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with mixing of water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note:- water proofing compound shall be measured & paid seprately. Where the items executed upto 10 mtr height, necessary scaffolding, props, jacks, shuttering and ladder shall be provided by the contractor in his own arrangement and the same is included in unit rates quoted. Green cloth shall be provided all around the work site for any position/height with all safety precaution (i.e. Safety Jacket, Safety Shoes, Safety Masks, Safety Helmet, Safety harness, Safety Goggles etc) Without safety precaution this work will not be commenced as decided by Engineer-in- Charge/ by AGE(I). NO extra cost shall be paid for such precaution. Such precaution shall be deemed to be included in the quoted rate.

Supply only integral crystalline water proofing admixture, complete all as specified and directed. Make:- Dr. Fixit, Pidilite.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over & including one coat of birla white putty 1 mm thick preparatory to distempering, complete all as specified and directed.

Complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L for two coats water based premium acrylic smooth exterior emulsion of approved colour including primer and 1 mm thick wall care putty with silicon addictive & Color stay Technology Excellent Dirt Pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specification, Anti Algal properties in two coats @ 1.79 Itrs (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 Itr per minute having a pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr. The spray machine should be of reputed paint manufacturer as mentioned in PS and accessories for applying emulsion should be able to spray in hard to reach areas and penetration of emulsion on the surface with using auto roller for making the surface uniform complete all as specified and directed.. Allow 6-8 hrs to dry the surface in both the coats of paint with using auto roller for making the surface uniform complete all as directed. Make of Manufacturer:- ASIAN/BERGER/ NEROLAC or equivalent.

M&L for preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synnthetic enamel paint of approved colour / shade, complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, not otherwise described over 10 cm in width or girth and applying one coat synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old plastered surface and applying two coat of oil bound distemper on ceiling over a coat of primer and 1 mm thick wall care putty including complete removal of existing treatment complete all as specified and directed.

M&L for preparation of old plastered surface and applying two coat of oil bound distemper on walls over a coat of primer and 1 mm thick wall care putty including complete removal of existing treatment complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) in plinth protection, finished even and fair, complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame).(Ventilator and Window), complete all as specified and as directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame). (Doors and Window), complete all as specified and as directed.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. Note:- 1. The rate is inclusive of all fixings of builders hard ware such as hinges, bow handles, locking arrangements rubber beding for fixing of glass etc complete all as directed by Engr-in-Charge. 2. Glass and wiremesh shall be measured and paid sepretely for payment purpose only

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Note:- 1. The rate is inclusive of all fixings of builders hard ware such as hinges, bow handles, locking arrangements rubber beding for fixing of glass etc complete all as directed by Engr-in-Charge. 2. Glass and wiremesh shall be measured and paid sepretely for payment purpose only

S&F rollded MS Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.

S&F 5.5 mm thick plain sheet glass as in,shutters with and including rubber gasket and natural colour anodized 15 micron snap on aluminium beading/glazing, clips etc, complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair 100 mm size 4-lever mild steel mortice lock vertical type with two keys etc complete all as specified and directed.

S&F in repair Aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg, complete all as specified and as directed.

S&F in repairs in repair 25 mm dia stainless steel drapery rod cut to size and fixed in position including brackets, cap both ends fixed to wall, complete all as directed.

S&F in repair Door Seal length of each door seal is equal to width of door fixed to door bottom rail including all fixing arrangement such as screws ,nails etc,complete all as specified and as directed.

S&F Pressed steel frames factory made for doors out of 1.25 mm thick PBI sheet with one of more rebates including necessary flat iron lugs,hinges, lock strike plate, hinges etc complete, size of frame 125 x 60mm including tarring ends and back of chowkats and lugs including back filling of PCC 1:3:6 for chowkats & PCC 1:2:4 for block for hold fast including two coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces, complete all as specified and as directed.

S&F Pressed steel frames factory made for doors out of 1.25 mm thick PBI sheet with one of more rebates including necessary flat iron lugs,hinges, lock strike plate, hinges etc complete, size of frame 105 x 60mm including tarring ends and back of chowkats and lugs including back filling of PCC 1:3:6 for chowkats & PCC 1:2:4 for block for hold fast including two coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces, complete all as specified and as directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete all as specified and directed. Note :- (i) The WPC shall comprising of virgin PVC polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms). (ii) The frame shall fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws. (iii) The WPC shall have minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant. (iv) The cost of M.S. hold fast/ lugs or SS dash fasteners shall deemed included in quoted unit rate. Each frame shall be fixed with min 06x holdfasts/ faster's.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of requiredsize with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. Note:- stainless steel butt hinges and necessary S.S screws shall be paid separately.

S&F 35 mm Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F 30mm thick plain WPC factory made glazed Skeleton door shutters (conforming as per IS-4020) with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door to be panelled with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose. Door should be fixed with SS hinges and SS screws. Door should be water prrof, termite proof, fire retardant and having screw holding capacity complete all as per manufacturers specification & drawings & as directed by Engineer-in-Charge. Note- Stainless steel wire mesh shall be measured and paid separately.

S&F 150mm SS handles, Complete all as specified and directed.

S&F 200mm SS barrel tower bolts fixed as specified and directed.

S&F 250 mm SS sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet fixed,complete all as specified and as directed.

S&F 100 mm long SS butt hinges, complete all as specified and directed

S&F 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor Door Stopper 140 mm complete all as specified and directed

Taking down Shutter exceeding 1.0 Sqm but not exceeding 2.00 Sqm each complete all as specified and directed.

Taking down Shutter exceeding 2.0 Sqm each complete all as specified and directed.

S&F 150 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F mild Steel 150 mm dia oval shape handle fancy type brass polished bright finish complete all as specified and directed

S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved samaple by complete all as specified and directed by Engineer - in- Charge.

S&F continuous (piano) hinges, mild steel bright finish of width 30 mm complete all as specified and directed.

M&L for 40 mm brass dia cuboard knobs fixed with nuts ,screws and washers of mild steel, bright finished, complete all as specified and as directed.

Providing and fixing 18mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powcler/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being Termite/borer proof, water/moisture proof and Fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. Note:- Stainless steel hinges shall be paid separately.

Providing and fixing 12 mm thick factory made single extruded WPC (Wood Polymer composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In-Charge. Note:- Stainless steel hinges shall be measured & paid separately.

S&F in repair chrome Plated Stainless Steel 304 grade wire basket for utenisils with necessary fixing clips fixed in cupboards etc complete in all respect complete all as specified and directed

S&F in repair Ball bearing runner 45 mm Telescopic (KTS - 20) full extension, load capacity 50 Kgs, complete all as specified and directed .

S&F in repair Auto closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) operable at 110 degree for kitchen cabinet shutters, complete all as specified and directed,

M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including Screed bed or bedding layer of mortar 10 mm thick for laying floor finishes with & including 25 mm thick PCC 1:2:4 type B0 including dismantling of exsiting tiling/pcc floor/ wall any type and removing dubries outside of Md/OTM Accn complete all as specified and directed.

M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including over Screed bed or bedding layer of mortar 10 mm thick for laying floor finishes with & including 25 mm thick PCC 1:2:4 type B0 including dismantling of exsiting tiling/pcc floor/ wall any type and removing dubries outside of Md/OTM Accn complete all as specified and directed.

M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including Screed bed or bedding layer of mortar 10 mm thick for laying floor finishes with & including 25 mm thick PCC 1:2:4 type B0 including dismantling of exsiting tiling/pcc floor/ wall any type and removing dubries outside of Md/OTM Accn complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with & including 10mm thick plaster in cm 1:4 including dismantling of exsiting tiling/pcc floor/ wall any type and removing dubries outside of Md/OTM Accn complete all as specified and directed.

M&L for heavy duty out door coloured ceramic tiles exceeding 0.11 sqm but not exceeding 0.18 sqm 12 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including 15 mm thick screed bed in cement mortar (1:4) including dismantling of exsiting tiling/pcc floor/ wall any type and removing dubries outside of Md/OTM accn complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) in levelling course for floor heavy duty tiles in open area benching etc, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in copings, kerbs including necessary formwork, complete all as specified and as directed.

M&L for PCC 1:4:8 Type D-2 using 40mm graded crushed stone agg , as in fdn filling and mass concrete including demolition of existing floor concrete in ground floors and pavings n exc15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for coloured rubberised Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and no pigment, complete all as specified and directed.

M&L for Fine aggregate (sand) for laying floor finishes, complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar, complete all as specified and as directed.

M&L for 16-18 mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed.

S&F in repairs sinks without drainage board made of stainless steel 01 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specifiedand directed.

M&L for Slabs supported on walls Type B-0 1:2:4 (12.5mm graded crushed stone aggregate) including demolition of reinforced cement concrete as in slabs of any description, complete all as specified and as directed.

M&L for Pre-cast RCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in cover slab of manholes, septic tanks, etc. and set in cement mortar 1:4 including dismantling of damaged RCC covers slab, complete all as specified and as directed. Note :- Reinforcement will be measured and paid for separately under relevant Items.

M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending, spirally for hooking for hooking and binding with including mild steel annealed wire not less than 0.9 mm dia securing with clips complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe, complete all as specified and as directed.

S&F PP-R Pipe of size of 20mm bore outer dia ,PN 16 with all fittings fixed to walls and cellings or laid in floors, complete all as specified and directed

S&F GI tube 15mm bore medium grade with all fittings fixed to walls and ceilings or laid in floor, complete all as specified and as directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe, complete all as specified and as directed.

M&L for 20mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F PP-R Pipe of size of 25mm bore outer dia ,PN 16 with all fittings fixed to walls and cellings or laid in floors complete all as specified and directed

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls, complete all as specified and as directed.

S&F 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old tank, complete all as specified and directed.

S&F 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old tank, complete all as specified and directed.

S&F PP-R Gate valves (brass insert) as per requirement of the site outer dia 20 mm complete all as specified and directed.

S&F PP-R Gate valves (brass insert) as per requirement of the site outer dia 25 mm complete all as specified and directed.

S&F in repair 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 g ms), complete all as specified and as directed.

S&F in repair 15 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 g ms), complete all as specified and as directed.

S&F in repairs colour european type combination pattern WC casket type christinna with mounted flushing cistern ,pvc connection,seat cover and jointed to sewage pipe, complete all as specified and as directed. Make: CERA cat No. S1013119 or equivalent approved makes given under list of makes.

S&F in repair vitreous china wash hand basin with pedestal pattern white flat back size 550 x 400 mm excluding taps waste chain and plug but including bracket, waste coupling of 32 mm size fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china pedestal pattern (P Trap) type white wash down water closet pan with Antimicrobial Solid Seat Cover Code No.: C8094 but excluding flushing cistern and flush pipe, complete all as specified and as directed. Make:- Parryware "Niagara" Code No C0252 or equivalent makes given in list of make.

S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim all as specified and as directed.

S&F in repairs vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc, complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed.

S&F in repair 110 mm dia PVC (SWR) bends any radius with oval access door, complete all as specified and as directed.

S&F in repair 75 mm dia PVC (SWR) bends any radius complete all as specified.

S&F in repair 110 mm dia PVC (SWR) branch piece, (double Y) equal or unequal, complete all as specified and as directed.

S&F in repair 75 mm dia PVC (SWR) branch piece, (double Y) equal or unequal, complete all as specified and as directed.

S&F in repair 75 mm dia PVC (SWR) bends with access door any radius complete all as specified.

S&F in repair 110 mm dia PVC(SWR) plain bends any radius complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all type earth work, complete all as specified and as directed.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F in erpair PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all type earth work, complete all as specified and as directed.

S&F in repair PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, fixed on walls, complete all as specified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for as in sunken floor etc. complete all as specified and directed.

M&L for Providing, cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in coping, coving, roof padding, padding in sunken slab as directing mixed with liquid water proofing compound complete all as specified and directed.

M&L for PCC 1:7:12 type F2 (using 40 mm graded crushed stone aggregate) as in filling into sunken floor complete all as specfied and directed.

Supply only liquid water proofing admixture, complete all as specified and directed. Make:- Dr. Fixit, Pidilite.

M&L for Providing 25 mm thick, cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate in flooring in sunken slab complete all as specified and directed.

M&L for Treatment to sunken floor and sides as mentioned here after:- (Step-I) Cleaning of RCC surface to remove existing treatment to sides and base slab by using sand blasting with compressed air. (Step-II) M&L application of a coat to sides and base of sunken with glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal -107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika Fab-I and top coat with Sika Seal-107@ 1.50 Kg/Sqm or equivalent of Forsoc or pidilite. (Step-III) M&L 15 mm thick cement plaster on side and base slab of sunken part in cement mortar 1:3 mixed with appropriate integral water proofing compound with Sika Plastocree plus as specified. (Step-IV) M&L applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm on plastered surface of sunken sides & base.Note:All debris obtained from site will be thrown away out side Def Land by contractor at his own expense.

S&F cleaning of PVC service/ over head tank of capacity up to & including 500 Litres process are as under:- (a) Dewatering using submerssible pump/bailing out of water to dispose the minimum level of dirty water from the tank. (b) Cleaning the tank inside walls, bottom, ceiling of tank using high pressure water jet to dislodge the algae calcinations, dirt etc. (c) Disposing the dirt water sludge etc., using specially designed sludge removal pump. (d) Cleaning the tank inside throughly by using industrial grade vaccum pump to make the tank inside free from dirt, algea and sludge etc. (e) Treating the inside walls, bottom, ceiling of tank including all nooks and corners by using and spraying anti bacterial agent such as hydrogenperoxide (bio degradable) for disinfection of tank inside. (f) Total disinfection and sterlisation of tank hyginecally cleaned and bacteria free and safeby Eco-Friendly for storage of water. (g) The area/Location of of Job will be all MD and OTM accn in AOR of OD Fort Cantt. Note :- Date of cleaning to be written over head tank after cleaning.

S&F cleaning of PVC service/ over head tank of capacity exceeding 500 Litres up to 1000 ltrs process are as under: (a) Dewatering using submerssible pump/bailing out of water to dispose the minimum level of dirty water from the tank. (b) Cleaning the tank inside walls, bottom, ceiling of tank using high pressure water jet to dislodge the algae calcinations, dirt etc. (c) Disposing the dirt water sludge etc., using specially designed sludge removal pump. (d) Cleaning the tank inside throughly by using industrial grade vaccum pump to make the tank inside free from dirt, algea and sludge etc. (e) Treating the inside walls, bottom, ceiling of tank including all nooks and corners by using and spraying anti bacterial agent such as hydrogenperoxide (bio degradable) for disinfection of tank inside. (f) Total disinfection and sterlisation of tank hyginecally cleaned and bacteria free and safeby Eco-Friendly for storage of water. Note :- Date of cleaning to be written over head tank after cleaning.

S&F cover for over head PVC water storage tank of capacity 500/1000 ltrs rotating type including frame including nut bolt, complete all as specified and directed.

S&F in repair 15 mm size bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.

S&F in repair 15 mm size bib taps (Long Body) cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.

S&F in repair 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and as directed.

S&F in repairs angle cock, 2 way, with wall flange 15 mm dia complete all as specified and directed. Make :- Prayag cat no. 6711, techno-commercially equivalent model in Jaquar or Cera.

S&F in repair pillar tap cast copper alloy with capstin heads chromimium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

S&F in repair Single Lever Basin Mixer with 450 mm long braided hoses complete all as specified and directed. Make:- Jaquar Cat No.FLR-5001B or equivalent of makes as specified in the list of makes.

S&F in repairs of Brass chromium plated 15mm wall mixer valve 3-in-1 for mixing hot and cold water, fancy type as per cat No.29281 of of Jaguar or equivalent of HR. Johnson/Parry ware including taking down the existing one complete all as specified and directed.

S&F in repairs Health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated as per cat no HF3342 of Jaguar or equivalent of HR. Johnson/Parry ware all as specified and as directed by the Engineer-in-Charge.

S&F in repair Brass chromium plated shower rose 125 mm size and fixed complete all as specified and directed.

S&F Stailness steel plate rack thickness 01 mm of size 910mm x 780mm x 250mm (31'' x 36 " 10") with separators and 3 tier shelves, provisionsing of hook 9 Nos made out of stailness steel sheet of grade AI SI 304 and fixed in repairs, complete all as specified and as directed.

S&F 250 mm size mild steel peg stay fixed to steel window (as per sample), complete all as specified and as directed.

S&F in repair 15 mm bore stop valve fancy type chromium plated with long cup and shank (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F Cabinet Mirror PTMT 450 x 555 mm with sided shelves fancy type of superior quality all as spcified and directed Engineer-in- Charge. Make : Neelkamal, Commander

S&F corner glass shelf superior quality matt finished crromium plated (MCH/Colour CP ) with bracket and fittings as per cat No. 1173 of Jaquar or equivalent Cat Part as per list of make, complete all as specified and directed by Enginee-in- Charge.

S&F glass shelf matt finished chromium plated (MCH/Colour CP) Jaquar Continental ACN-CHR-1171N or equivalent Cat Part as per list of make 600 mm Glass Shelf - (Chrome, Wall Mounted) bracket and fittings, complete all as specifid and directed.

S&F toilet paper holder with flap recessed type chromium plated as per Cat No ACN-CHR-1153S of Jaquar or equivalent of in Marc / Kohler, complete all as specified and as directed.

S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall, complete all as specified and directed.

S&&F in repair mild steel tubing of 25 mm dia with PVC coating for curtain rod fancy type including fancy type PVC rings and brackets (wall to wall or flush to wall) for securing to curtain rod, fixed in repair, complete all as specified and as directed.

S&F in repair SS soap dish complete all as specified and directed

S&F in repairs PVC flexible waste pipe 32 mm dia for urinals and wash basin, kitchen sink, complete all as specified and as directed.

S&F in repairs waste coupling of 32 mm size brass chromium plated for glazed ware wash hand basins. etc., complete all as specified and as directed.

S&F in repairs waste coupling of 40 mm size brass chromium plated for sink, complete all as specified and as directed.

S&F in repairs PVC Jet for EWC complete set including 15 mm long, complete all as specified and as directed.

S&F in repairs PVC syphon complete for low level flushing cistern, complete all as specified and as directed.

S&F in repairs 450 mm long PVC connections 15 mm size with PTMT nuts at both end, complete all as specified and as directed.

S&F in repairs 600 mm long PVC connections 15 mm size with PTMT nuts at both end, complete all as specified and as directed.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging devices, complete all as specified and as directed.

S&F in repairs mild steel pressed handles, oval type, stove enamelled black of size 150mm complete all as specified and directed.

S&F 100 mm butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F Mild steel in repairs sliding door bolt of length 250 mm ,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F in repairs mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed of size 150 mm, complete all as specified and as directed.

S&F in repairs PVC fiber sheet shelf 450x125 mm with bracket com, complete all as specified and as directed. Make:- Jaquar Cat No.FLR-5001B or equivalent Cat Part as per list of make.

S&F in Repairs PVC fiber sheet corner shelf, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frame, glazed with putty or fixed with beads, complete all as specified and as directed.

S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in Sqm n.exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 3.00 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 in each pane, complete all as specified and directed.

Supply only spindle brass for 15 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern, complete all as specified and directed.

S&F in repairs Aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair 75 mm dia PVC floor trap plain with grating including jointing with solvent cement, complete all as specified and as directed.

Taking down carefully copper/aluminum point wiring (light/fan/socket power) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, socket, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring light/fan/bell point with PVC insulated FRLS unsheathed single core cable of multistranded copper conductor of size 1.5 sqmm as phase & neutral drawn in and including PVC conduit medium grade not less than 20 mm dia, ISI marked, duly concealed to wall/floor or above false ceiling of suitable size with all fitting and accessories laid on wall/ceiling alongwith 1.5 sqmm stranded PVC insulated FRLS unsheathed copper conductor(Green in color) as earth wire and connected to common earth dolly for the following incl making good to surface with CM(1:4) plaster and paint to match the surface complete incl provn of CI/pressed steel terminal switch box and white bakelite plastic laminated top sheet cover and fixed with brass screws cup washer for fixing switches/socket/regulators etc complete all as specified and directed for the following: - (a) one light/fan point

(b) All as per item No. 165 above but for one bell point on independent board controlled by one 5 Amps bell switch, complete all as specified and as directed.

(c) All as per item No. 165 above but for One 5 pin 5 amps socket outlet on same board with cables of size 1.5 sqmm, complete all as specified and as directed.

(d) All as per item No. 165 above but for One 5 pin 5 amps socket outlet on independent board with cables of size 2.5 sqmm, complete all as specified and as directed.

(e) All as per item No. 165 above but for One 6 pin 15/16 amps socket outlet on independent board with cables of size 2.5 sqmm, complete all as specified and as directed.

S&F Switch Piano Flush button single pole one way 5 Amp, complete all as specified and as directed.

S&F socket outlet flush type 3/5 pin 5/6 Amps 230V AC, complete all as specified and as directed.

S&F switch piano flush single pole one way 15/16 Amps, complete all as specified and as directed.

S&F socket outlet flush type 5/6 pin 15 Amps 230V AC, complete all as specified and as directed.

S&F Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed.

S&F calling bell ding dong AC 230 volts single pole, complete all as specified and as directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

S&F in replacement of ceiling light with recessed mounted LED light luminaries of size 600 mm x 600 mm an independent isolated, electronic LED driver (SMPS based constant current supply) housed in CRCA powder coated sheet of system wattage- 36 watt maximum, Colour Temp - 3000 to 6500 K, Lumen output- 4200-4400 Lm, THD < 10%, PF > 0.95, having short circuit and surge protection upto 4 KVA with all connected accessories including making connection with three core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed.

S&F wall bracket light fancy type suitable for B-22 base holder incl 10W LED bulb, complete all as specified and as directed.

S&F MCB DB SPN 8 way with 200 amps 240 volts rated copper busbar in sheet steel enclosure.double door type, complete all as specified and as directed.

S&F MCB DB SPN 4 way with 200 amps 240 volts rated copper busbar in sheet steel enclosure.double door type, complete all as specified and as directed.

S&F in replacement of Sheet metal enclosure for Double Door DBs VTPN 4 Way 415 V with 200 amps rated bus complete with incoming/outgoing connection through proper size of lugs and cable glands, including taking down complete all as directed.

S&F MCCB 100 Amp 4 pole 16KA suitable for VTPN here in above complete all as specified and directed.

S&F MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed.

S&F MCB, SPN, AC, 240 volts of 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store, complete all as specified and as directed. Note:- The contractor shall deposit the existing fan to store yard of AGE E/M Fort cantt. Quoted rates shall deemed to be included for taking down and transportation of the fans and the fans will be disposed off as per policy in vogue.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm including cutting of suitable hole for exhaust fan and making good disturbed surfaces of walls, floor to match with existing specification, complete and all as specified

Taking down old/existing geyser from site including disconnection of all the water and electric connections and refixing in same or other location as directed, reconnection of its electric and water connections incl new PVC connections,complete all as specified and as directed. Note:- The contractor shall deposit the existing geyser to store yard of AGE E/M old cantt and recollect them for refixing at site. Quoted rates shall deemed to be included for the nut-bolts, washers, fastners and transportation.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A, complete all as specified and as directed.

S&F LED bldg light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including making connection with copper conductor cable of required size, complete all as specified and as directed.

Disconnecting and taking out old unserviceable submain wiring and S&F sub main wiring with two single core PVC insulated,unsheathed, multistranded copper conductor cable 6 Sqmm with one single core 6 Sqmm PVC insulated, unsheathed, stranded copper conductor cable as earth wire in and including PVC conduit(HMS)of required size duly concealed to wall/floor or above false ceiling with all fitting and accessories laid on wall/ceiling and earth wire connected to common earth point complete all as specified & directed.

Disconnecting and taking out old unserviceable submain wiring and S&F sub main wiring with two single core PVC insulated,unsheathed, multistranded copper conductor cable 4 Sqmm with one single core 4 Sqmm PVC insulated, unsheathed, stranded copper conductor cable as earth wire in and including PVC conduit (HMS) of required size of duly concealed to wall/floor or above false ceiling with all fitting and accessories laid on wall/ceiling and earth wire connected to common earth point, complete all as specified & directed.

M&L for earthing complete with galvanished steel earth plate electrode 600x600x6.0 mm thick buried directly in ground and earth pit not less than 2.25 mtr deep below NGL and top edge of the plate not less than 1.5 Mtr deep below NGL, surrounded with adequate qty of char coal dust mixed with salt to a packed thickness not less than 15 Cm on all sides of earth plate incl excavation, earth work, returning filling in , removal of surplus soil to a distance in n.exc. 50 mtr incl GI wire 4mm dia nut bolts etc to earth plate one end connected to continuous earth wire incl 20mm CI medium grade protection pipe and 20mm GI pipe watering light grade with CI funnel and wire mesh and PCC 1:2:4 type B-1 as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly re-enforced with MS bar 6mm dia @ 150mm C/C both ways with 10mm dia MS bar lifting handles, all as described in electric plate No. 3 of SSR part-I, complete all as specified and directed.

M/S A P CONSTRUCTION (BID ID -3379061)