CONSTRUCTION OF ONE ADDITIONAL CLASSROOM AT UPS DARSHIPORA,PANCHAYAT CHAREEL(DOUBLE STOREY)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed in all kinds of soils.

Ordinary Rock

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size).

Providing and laying in position Reinforced cement concrete in beams, cantilevers, suspended floors, roofs etc. etc. all work above plinth upto floor V level of specified grade including curing but excluding the cost of centring and shuttering in 1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel Reinforcement for RCC work including cutting, bending, binding and placing in position all complete (TMT bars of Fe500 Grade)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with 30% boulders

Providing and laying in position stone Boulders of small size including all etc. complete

Brickworkwith common burnt clay bricks of class designation 75 in cement moratr 1:6 (1 cement: 6 coarse sand) in foundation and plinth

Extra for Brickworkwith common burnt clay bricks of class designation 75 in cement moratr 1:6 (1 cement: 6 coarse sand) above plinth

Centering and shuttering including strutting, propping etc. and removal of form work for:foundations ,footings etc.

Centering and shuttering including strutting, propping etc. and removal of form work for:suspended floors, roofs etc.

Centering and shuttering including strutting, propping etc. and removal of form work for:Lintels, beams etc.

Centering and shuttering including strutting, propping etc. and removal of form work for:Edges of Slabs etc

6mm thick cement plaster of mix 1:3 (1 cement: 3 fine sand)

12mm thick cement plaster of mix 1:6 (1 cement: 6 fine sand)

15mm thick cement plaster of mix 1:6 (1 cement: 6 fine sand)

Filling of excavated earth and boulders inside the plinth with all lead s and lifts along with compactionand rammering all complete.

Colour washing such as green blue or buff to give an even shade on new work with two or more coats with a base coat of white washing with lime

Wood work in frames of doors, windows, ventilators and other frames wrought framed and fixed in position with hold fasts of Imported wood

Providing/fixing of Panelled or Panelled & glazed shutters 35mm thick for doors, windows, celestory windows using with 4mm thick glass panes and ISI marked MS pressed butt hinges complete with screws (Imported wood)

Providing/fixing of MS Grill of required pattern in frames of windows etc. with MS flats sqaure or round bars with a priming of approved steel primer all complete

Painting with Synthetic enemal paint of approved brand and manufacture two or more coats.

Making Plinth protection 50mm thick of cement concrete 1:3:6 (1cement:3Sand:6graded stone aggregates) with 20mm nominal size aggregates over 75mm thick boulders along with all compaction and rammering complete

Providing/Fixing of aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to requird colour or shade with nuts and scews complete (250x16mm)

Providing/Fixing of aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to requird colour or shade with nuts and scews complete (100x10)mm

Providing/Fixing of aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to requird colour or shade with nuts and scews complete (125)mm

Providing/Fixing ISI marked anodised MS pressed butt hinges with nuts and scews complete (100x58x1.9mm)

Providing/Fixing of Glass panes with putty and glazing clips in steel doors, windows all complete with 4mm thick glass panes

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ringconforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110mm dia

40mm thick Cement Concrete Flooring 1:2:4 (1 Cement:2 Coarse Sand:4 Aggregates) finished with a floating coat of neat cement including cement slurry and curring complete.

Providing and laying 1st Class Ceramic Glazed Floor Tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades laid over 12mm thick bed of cement mortar 1:3(cement:coarse sand) i/c grouting the joint with white cement and matching pigments etc. complete (600x600mm)

Providing and fixing of Hand Rail of steel welded railing including primimg coat of standard quality as per the site Engineer

Providing and fixing of electrification with complete wiring and switches of standard quality as per the site Engineer

Carriage of Steel/Cement from source to site by mechanical transport or animal transport or by head load

Carriage of Sand from source to site by mechanical transport or animal transport or by head load

Carriage of Aggregates from source to site by mechanical transport or animal transport or by head load

Carriage of Stones from source to site by mechanical transport or animal transport or by head load

Carriage of Bricks from source to site by mechanical transport or animal transport or by head load

Providing/Fixing of Citizen information board (complete job)