Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.0 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹13.6 L+₹84,126.40 (6.57%)Rejected-Finance | L2 | Rejected-Finance HIGHER BIDDER | |
| 3 | L3₹14.2 L+₹1.4 L (11.2%)Rejected-Finance | L3 | Rejected-Finance HIGHER BIDDER | |
| 4 | L4₹14.6 L+₹1.8 L (14.4%)Rejected-Finance 17 NO TIKIA MAHAL ORDERLY BAZAR PO PS BARRACKPORE DIST 24 PGS KOLKATA 700120 WB | KOLKATA | 24 PGS | WB | 700120 | L4 | Rejected-Finance HIGHER BIDDER | |
| 5 | L5₹15.6 L+₹2.8 L (22.2%)Rejected-Finance | L5 | Rejected-Finance HIGHER BIDDER |
Tender Value
₹14.4 L
EMD Value
₹28,800
Closing Date
21 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
VIVEK TANENIA
GARRISON ENGINEER (CENTRAL) KOLKATA T 37 NAPIER ROAD HASTING KOLKATA 700022
CERTAIN MINOR WORKS UNDER GE (CENTRAL) KOLKATA
2023_MES_583489_1
8569/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
KOLKATA
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE (C) KOLKATA
₹28,800
Yes
31 Mar 2023
28 Feb 2023
22 Mar 2023
28 Feb 2023
21 Mar 2023
15 Mar 2023
28 Feb 2023 - 14 Mar 2023
Amount
Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.
Dismantling Timber Fillets, Rails, Posts, Rafters, Purlings, etc., under 40 Sqcm in Section, in any Position, as in framed Work, complete all as specified and as directed.
Taking down Shutters of any description, exc. 1.00 Sqm but not exc 2.00 Sqm Each complete all as specified and as directed.
Taking down PVC door shutters with PVC chowkats including all fittings area exc 1.00 Sqm and n.exc. 2.00 Sqm Each complete all as specified and as directed.
Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed.
Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debries/ rubbish, etc., complete all as specified and as directed.
Taking up or down Steel Water Tubing 15mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use or removal to store complete all as specified and as directed.
Taking up or down Steel Water Tubing 25mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use or removal to store complete all as specified and as directed.
Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches of 100 mm internal dia complete all as specified and as direceted.
Taking down unserviceable PVC (SWR) Pipes & Fittings of any size or pattern and in any Position (Measured overall as fixed along the Centre Line over the Fittings and Accessories), complete all as specified and as directed.
Surface dressing not exc. 150mm deep and getting out in Soft/Loose Soil, complete all as specified and as directed.
M&L Sand filling under floors or in founda-tions including watering and consolidation, complete all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth round, in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.
M&L Spraying or brushing two coats of chemical emulsion chlorpyriphos 20% EC or equivalent diluted in kerosene and applied @ 0.25 Ltr per Sqm on termite infected wooden surface such as doors, windows, cub boards, ceiling, wall panelling, etc complete all as specified and directed.
M&L Cement Concrete Type B1,1:2:4 (40 mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed.
M&L Cutting Chases in Brick Walls or any position where directed for Concealed Water Tubing/ Conduit, Pinning in, Making Good to facings where required and Pointing in Cement Mortar 1:3 to making good, cutting not exc. 10 Cm girth, complete all as specified and as directed.
M&L Second Class Hardwood Plain Fillets sqaure, rectangular or triangular in section wrought, secured with Nails, cross sectional area exc13.0 Sqcm but not exc. 25.0 Sqcm complete all as specified and as directed.
S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.
S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5 mm thick PVC sheet fillet of width 35mm for wall Paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing including taking down old unserviceable PVC wall lining complete all as specified and as directed.
M&L Mild Steel Flat Iron 25 x 3 mm, as in Holdfast for Door, Window Frames or Chowkats etc., Wind Ties for Roof including securing bolts cut to length or drilled hole and fixed with Screw, etc., grade of Steel conforming to Fe-290 Gde E-165, complete all as specified and as directed.
S&F Rolled mild steel angle,flats,etc independently fixed without connecting plates etc but ordinary length of FE-410- W(Gde-E-250) quality-B as in fencing posts including drilling holes for nuts and bolts etc complete all as specified and as directed.
S&F Collapsible steel gates, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specifed and directed.
M&L False ceiling with 'E' board "Classic" , reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium powder coated snap grid to support the boards/tiles with aluminium anodised main 'T' section 35mm x 25mm x 1.50mm cross tee 25mm x 25mm x 1.50mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements with 6mm dia GI hooks and clamp and applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces as in repair complete all as specified and as directed.
S&F Mild steel tubes 40 mm bore (Medium Graded) with all fittings & fixed to walls and ceiling for holding clamps of false ceiling as in repair complete all as specified and as directed.
S&F Aluminium ventilator with powder coated anodized aluminium frame of section size 65.5 x 38.10 x 1.5 mm and Shutter with section 47.62mm x 44.5mm x 1.5mm thick half portion fixed with glass and half portion louvered including powder coated alunimium anodised “D” handle, hinges, peg stays, tower bolt etc including jointing cleats for fixing Builder hardware complete all as specified & directed.
Supply and fix powder coated aluminium 50 Micron anodised three way track sliding windows of frame size 92mmx31.75mmx1.5mm thickness weight of 1.07kg/m (section No 20831 of Jindal) and of shutter size 40mmx18mm (with 9.00mm interlocking legs) x 1.45mm thicknes (section no 20737 of Jindal) Section two shutter glazed, covering half of span of opening each and one shutter skelton covering half of span opening) incl provn for making window aif light including 95mm aluminium handle with spring lock, stainless steel wire cloth 0.45 mm nominal dia of wire and average width of apperture 1.4mm and ficed with steel wire staples 5mm thick plain glasse including necessary fittings and fixture aluminium snap beading complete all as specified and directed Note:- Measurement shall be taken clear opening ie out to out of window frame as a whole including all fittings and fixtures and no cost extra shall be paid seprately cost of glass and wire cloth included herein complete all as specified and directed
S&F Brass Handle 75mm long, cast type , polished bright and fixed, complete all as specified and as directed.
S&F Aluminium alloy Handle 100mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed.
S&F Aluminium Handle 100mm long, cast type, anodized and fixed, complete all as specified and as directed.
S&F Aluminium anodized, Barrel Tower Bolt 200mm long, Extruded Section and fixed, complete all as specified and as directed.
S&F Aluminium anodized, Barrel Tower Bolt 150mm long, Extruded Section and fixed, complete all as specified and as directed.
S&F 300mm long Aluminium alloy, anodised, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and fixed, complete all as specified and as directed.
S&F Stainless Steel Butt Hinges, size of Hinges 100mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed
S&F Mild Steel Butt Hinges, size of Hinges 100mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed
S&F Stainless steel Continuous (Piano) Hinges, width of Flaps (when open) 40mm, bright finish and fixed, as in repair complete all as specified and as directed.
S&F Magnet catcher for cupboards as in repair complete all as specified and directed.
S&F Brass Cupboard lock grade I ,50mm size ,2 lever fixed in position as in repair complete all as specified and directed.
M&L Prelaminated Particle Board 19/20 mm thick, interior grade, double leaf pre-laminated one side with decorative choice lamination and other side balancing white lamination fixed with Screws to Timber Frame Work as in cup board shelf/shutter ,Pelmet Box or in narrow widths not exc. 15 Cm each, rebated or flat edged, properly sealed with 5 mm thick 2nd class hard wood beading fixed with water resistant adhesive except rebate side as in repair complete all as specified and as directed.
S&F Pre-painted colour galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L Cement Concrete type D2 (1:4:8) using 40mm graded aggregate 100mm thick in Sub-bases, finishing concrete surfaces fair and even, complete all as specified and as directed.
M&L Roughening surfaces of old Concrete Floors, etc. by Picking, Sweeping, Clean and Washing down with Water to remove Dust, etc. and brushing Neat Cement Slurry @ 3.0 Kg per Sqm, complete all as specified and as directed.
M&L Cement Concrete type B1(1:2:4) (20mm graded crushed stone aggregate) 40 mm thick as in Floor, finishing Concrete Surfaces Even and fair without using Extra Cement, complete all as specified and as directed.
M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqm in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortar complete all as specified and as directed.
M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortar complete all as specified and as directed.
M&L Glazed Ceramic Coloured 450 x 350 x 7.0mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed.
M&L Rendering 20mm thick in Cement Mortar on fair faces of brick work or concrete surface of wall in two layer, first layer 10 mm thick in cement morter (1:4) and top layer 10mm thick in cement morter (1:4) using water proofing compound and finishing the surface even and smooth without using extra cement complete all as specified and as directed. . (NOTE:-WPC shall be measured and paid separately)
M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and fair without using Extra Cement complete all as specified and as directed.
M&L Rendering 5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces of Ceiling, etc. finishing Plastered Surfaces Even and Smooth, without using Extra Cement. complete all as specified and as directed.
"Supply only" liquid water proofing compound (ISI marked) complete all as specified and directed. Make:- STP NO 1/ PEDILITE(DR FIXIT)/ FOSROC/ CICO/ SIKA
M&L Preparing old decorated Plaster Surfaces of Wall and applying One Coat of oil bound (any colour /tint) complete all as specified and as directed.
M&L for Preparation of new plastered surfaces and applying two coats of oil emulsion distemper (any colour/tint) over a coat of primer complete all as specified and directed.
M&L Preparing new plastered surfaces of walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 3mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.
M&L Preparing new Surfaces of Walls and applying Two Coats of Cement Base Paint over a coat of primer complete all as specified and as directed.
M&L Preparing new Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.
S&F Sheet Glass 3.0mm thick ordinary quality glazing with Wooden Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed.
M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.
S&F PVC (SWR) Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, ceilings and floors with pvc clamps complete all as specified and as directed.
S&F PVC (SWR) Bend 110mm bore (dia), any type, . and Jointing with Solvent Cement, complete all as specified and as directed.
S&F Cast Iron Soil, Waste and Vent Pipes 100mm bore (dia), Sand Cast, in any Length with or without Ears, with Cement Joints in Cement Mortar 1:1, fixed to Walls, complete all as specified and as directed.
S&F Vitreous China Wash Hand Basin 550x450mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, and 15mm dia PVC connector pipe, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 complete all as specified and as directed. Make - Parryware Model No-C0406(SP)/34(CTH) or equivalent as specified in the particular specification.
S&F 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections including taking down/out unserviceable one complete all as specified and as directed. Make : Cera cat part No CONGO B1010109/ Parryware Model No- C-8090 or equivalent model as specified in Particular Specification here in after.
Supply and fix in repairs Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor complete all as specified and directed. Make : Parryware Cat No C0123 or equivalent model as specified in list of approved makes given here in after in Particuler Specification.
S&F Chromium plated Health faucet with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) as in repair complete all and specified and directed Make:- Essco (CAT No. ALE-ESS-583) or equivalent make specified in the particular specification
S&F Chromium plated Health faucet with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) complete all and specified and directed Make:- Marc (MOR-1380) or Essco (TQT-512AN)
S&F Vitreous china urinal flat back half stall type of size 465X355X265mm white with grating & union for discharge pipe including Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) but excluding flushing cistern, flush pipe & waste pipe but fixing only automatic flushing cistern with bracket flush pipe etc as in repair complete all as specified and directed. Make:- Hindware Cat No 600001 or equivalent in Jaguar, Prayag, Cera, Parryware
S&F Glass shelf assembly consisting of 5.5 mm thick sheet glass self 19-12 cm wide, 60 cm long with chromium plated brackets guard and railing fixed in position with necessary fixing arrangement as in repair complete all as specified and directed. Make:- Prayag or equivalent make as specified in Particular Specification here in after.
S&F 150mm dia Chromium plated grating fixed in position with white cement as in repair complete all as specified and directed.
S&F Chromium plated Bib taps for 15 mm bore of pipe incl necessary fittings & fixtures as in repair complete all as specified & directed Make : Essco (DLX-511 or equivalent make specified in the particular specification
S&F Two way bib cock 15 mm bore with flange cast copper alloy chromium plated fancy type screwed for iron pipe brass ferrule etc. incl necessary fittings & fixtures as in repair complete all as specified & directed Make : Marc(MAC-3053) or Essco (ALE-ESS-583)
S&F Chromium Plated soap dish incl necessary fittings & fixtures as in repair complete all as specified & directed. (Make:- Essco Cat Pt No. AEC-1131N.or equivalent make specified in the particular specification
S&F Toilet paper holder of brass chromium plated fixed to walls with chromium plated CP brass screw as in repair complete all as specified and directed. Make : Essco Cat Pt No. AEC-1151N.or equivalent make specified in the particular specification
S&F Brass chromium plated Pillar Tap screwed for 15 mm bore pipe incl necessary fittings & fixtures as in repair complete all as specified & directed. Make : Essco (DLX-507) or equivalent make specified in the particular specification
S&F Brass chromium plated angular stop cock screwed for 15 mm bore of pipe etc.incl necessary fittings & fixtures as in repair complete all as specified & directed. Make:- Essco Cat pat No DLX 526NKN or equivalent make as specified in the particular specfication.
S&F Brass chromium plated fancy type stop cock screwed for 15 mm bore of pipe etc.incl necessary fittings & fixtures as in repair complete all as specified & directed. Make:- Essco Cat pat No DLX 513B or equivalent make as specified in the particular specfication.
S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings fixed on Walls Ceiling or laid in Floors or any other Situation with clamp complete as all specified and as directed.
S&F CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings fixed on Walls Ceiling or laid in Floors or any other Situation with clamp complete as all specified and as directed.
S&F 20mm bore brass MTA/FTA for CPVC pipes as in repair complete as all specified and as directed.
S&F 20mm bore brass elbow for CPVC pipes as in repair complete as all specified and as directed.
S&F 20mm bore brass tee for CPVC pipes as in repair complete as all specified and as directed.
S&F 25mm bore brass elbow for CPVC pipes as in repair complete as all specified and as directed.
S&F 25mm bore brass tee for CPVC pipes as in repair complete as all specified and as directed.
S&F Cascade type (coloured) floor mounted water closet with low level flushing cistern coloured with floor trap, PVC coloured seat cover and connecting pipe etc and making all necessary connections etc as in repair complete all as specified and as directed. Make : Parryware Aquarius, Code No. C-844A Qube or equivalent make as specified in Particular Specification here in after.
S&F PVC connection pipe 15mm size with PTMT nuts of length 600mm long as in repair complete all as specified and directed. Make : Prayag (Cat No. 323) or equivalent make as specified in Particular specifications.
S&F 40 mm dia PVC pipe with bend fixed to walls , ceilings and floor incl GI/PVC clamps ,bends and socket etc including all necessary fixing arrangement as in repair complete all as specified and as directed.
S&F 32 mm dia PVC waste pipe for WHB/Kitchen sink including all necessary fixing arrangement as in repair complete all as specified and as directed. Make:- Prayag Model -327 or equivalent make as specified in the particular specfication.
M&L for Concealed point wiring with 1.5 sqmm (nominal area) PVC insulated stranded single core unsheathed FRLHS copper conductor cable 1100 Volts grade drawn through with and including PVC Conduit with all fittings and accessories of PVC Conduit (like Tee, Bend etc) complete fixed to walls / ceiling etc with and including 1.5 Sqmm (nominal area) PVC insulated unsheathed, stranded, single core FRLHS copper cable as earth continuity wire connecting to common earth point for one light / ceiling fan/exhaust fan controlled for mounting modular switche, socket, regulators etc complete complete all as specified and directed by Engr- in-charge. Note: (i) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (ii) Modular switch boards/boxes andCutting Chases pinning shall be measured and paid separately under relevant item of Sch A
S&F Sunken flush metal GI boxes for fixing of modular switches/sockets flush to the walls. 1 Module/ 2 Module complete for modules complete all as specified and as directed.
S&F Sunken flush metal GI boxes for fixing of modular switches/sockets flush to the walls. 3 Module complete for modules complete all as specified and as directed.
S&F Sunken flush metal GI boxes for fixing of modular switches/sockets flush to the walls.6 Module complete for modules complete all as specified and as directed.
S&F Modular cover plate with frame for fixing of modular switches/sockets complete for 2 modules complete all as specified and as directed.
S&F Modular cover plate with frame for fixing of modular switches/sockets complete for 3 modules complete all as specified and as directed.
S&F Modular cover plate with frame for fixing of modular switches/sockets complete for 6 modules complete all as specified and as directed.
S&F Modular type switch 6 Amps 230V AC single module one way complete all as specified and as directed.
S&F Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.
S&F LED luminaire 2ftx2ft 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including taking down old unserviceable one.complete all as specified and directed. Make:Magik cat no PCVP036C or Philips cat no. R380B-LED36S-6500-G5-L60W60PSU-OD orequivalent Bajaj/Havells as specified in the particular specification.
S&F Surface and wall mounted LED batten 4feets with 1x20W indoor decorative luminaries with and including electronic driver and 1x20W LED lamp,pre wired including necessary electric connection copper flexible PVC cable of 0.5 sqmm 3 core not more than 1m in length from ceiling rose to light fittings including taking down unserviceable fittings complete all as specified and directed. Make: Magik Cat No. BWPP020C or Philips Cat no. BN021CLED22SPSUCWGR or equivalent in Bajaj/Havells
R T BUILDERS
SMART CONSTRUCTION
B N ENTERPRISE
NARAYAN BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .